MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

PTLens
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I just tried this software, straightening the barrel distortion in this Flek 4/20
pic:






plug-in for photoshop:

http://epaperpress.com/ptlens/


Reply

Yes! I use it frequently, it's cheap and works beautifully.

Jules


Reply

It works indeed. And it improves the shots taken even with a good lens like the Flek.

Dernière modification par LucisPictor le Mer Sep 10, 2008 3:14 pm ; modifié 1 fois au total


Reply

Thanks, Jules and Carsten, I'll be buying this one.

Bill


Reply

Katastrofo a écrit:
Thanks, Jules and Carsten, I'll be buying this one.

Bill


It's a good investment, plus the guy will do custom lens fixes. You send in a test pic from a specific lens and he will write the adjustment for you.

Very cool

Jules


Reply

Bibble does that too, but this setup is much handier to use.


Reply

They both based on Dr Deutsch's free software - kekus has been developing it for several years now. He's a good guy


patrickh


Reply

An extremely fine shot on its own!

But...I must have bloodshot eyes, I can't see much difference...would you point out the differences to my tired old eyes and brain? Confused


Reply

I didn't see it either Larry.

I did go to the PTlens website and look at the demo photos, looks interesting.


Reply

Larry, it was slight, just a -5 brought the buildings to vertical. I like that you
can pop up a grid to check your work, and a slider going to the right makes
more squares in the grid, very useful.

here's another two:

original:



ptl'd, here again, very slight -5 or -6 setting


Reply

Evil or Very Mad Evil or Very Mad The Flek 4/20 has no barrel distortion Evil or Very Mad Hrmpf!


Reply

Actually I think Bill could have been slightly more aggressive with his adjustments - and some of it is parallax not barrel. PTLens can make a certain amount of adjustment to compensate for the lack of shift



patrickh


Reply

Orio a écrit:
Evil or Very Mad Evil or Very Mad The Flek 4/20 has no barrel distortion Evil or Very Mad Hrmpf!


On another forum in a land faraway, the comment was made that the
buildings were leaning outward from center. Sorry, and yes, opposite
barrel distortion. Embarassed


Reply

patrickh a écrit:
Actually I think Bill could have been slightly more aggressive with his adjustments - and some of it is parallax not barrel. PTLens can make a certain amount of adjustment to compensate for the lack of shift



patrickh


Patrick, thanks, these were my first attempts using the trial version, and
have bought it, now. I'll see if I can improve on these first attempts.

Bill


Reply

Katastrofo a écrit:

On another forum in a land faraway, the comment was made that the
buildings were leaning outward from center. Sorry, and yes, opposite
barrel distortion. Embarassed


Opposite barrel distortion is really called pincushion distortion - but I never saw a wide angle lens displaying pincushion distortion in my lifetime.

If the other forum comment refers to the first photo in your original message, that is not barrel nor pincushion, but simply a problem of the camera's horizontal axis not being perfectly parallel to the horizon line: when you bend camera down, vertical lines seem to rise from the centre to the top corners; when you bend it down, the opposite occurs. In super wide angle lenses, this optical effect becomes particularly visible, but it's not related to the actual lens used.


Reply

Thanks, Orio, shooting with a 20 is new territory for me, and should have
known it was my poor technique, not the lens. Laughing


Reply

Katastrofo a écrit:
Thanks, Orio, shooting with a 20 is new territory for me, and should have
known it was my poor technique, not the lens. Laughing


It's not poor technique Smile
First it's very easy to miss it when photographing with a superwide without a tripod.
Also, it's not mandatory to always keep the camera in line, in my opinion. Of course if your goal is to shoot a building or anything much geometrical from a frontal perspective, it's a must.
But especially if you are in a oblique position, and if there are other things like humans, bending camera up or down can add some dynamics to what would otherwise be too static pictures.
More than one time I tried to correct such photos and noticed that the correction sterilyzed them, so I got back to the original slanted image. Smile


Reply

It is also why the pros will always use a shift lens (or camera) when doing architectural work.

Bill
Orio is right and it takes a load of practice (which I personally have not done) to get it right. Smile Smile Smile


patrickh


Reply

Thanks Orio and Patrick, I'll keep at it! Smile