MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Need help with PK mount adapter...
Voir le sujet précédent :: Voir le sujet suivant  


Reply

This was my first chipping of an adapter.
I'm using this on a Tamrom 500mm SP. Even though the lens is an Adaptall, it came with an intermediate PK mount adapter. So I bought a PK to 4/3 adapter to fit it in my Olympus E-510.

Now when I chipped the PK to 4/3 adapter I found out that the black lever on the PK side of the intermediate adapter hits the chip as shown in the pictures.

What's this lever for?
Can I saw it off? And glue it as if the lens was allways mounted?
Will it release the aperture mechanism on other lenses (The 500mm SP is fixed F8)?
I'll need this adapter to use on another PK mount lens too.
Thanks.



Dernière modification par duartix le Lun Sep 22, 2008 3:45 pm ; modifié 1 fois au total


Reply

It's the apreture conrloling lever. Cuting it will disable a PK mount camera body to control the aperture.
I don't know it it could be took out in a way that the process is reversable (isf you want to sell the lens/adapter)


Reply

montecarlo a écrit:
It's the apreture conrloling lever. Cuting it will disable a PK mount camera body to control the aperture.
I don't know it it could be took out in a way that the process is reversable (isf you want to sell the lens/adapter)

That was exactly my worry... If later I wanted to sell the lens where the adapter was it would loose some value, but alas, a co-worker with pretty clever hands (and little tools) just took out the lever, mounted the chipped adapter and put the lever back on.
Thanks.