MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Sears TLS Batteries
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Does anyone know if the Sears/Ricoh TLS camera has voltage regulation circuitry so it can take the modern 1.5v batteries, as opposed to the original 1.35v battery, without change in the light-meter readout?

~Marc


Reply

I don't know about ricoh. I know that spotmatic had it.

Rino.


Reply

estudleon a écrit:
I don't know about ricoh. I know that spotmatic had it.

Rino.

Sorry, I need to correct you there slightly Rino. Jes and I have tested this out very thoroughly. The later Spotmatic SPF and ESII models have a balanced meter circuit design and show correct exposure when there is no current flow, so they can indeed cope with a fluctuating voltage. However, the meters in the earlier SP models and SPII are designed to show correct exposure when a tiny current is flowing thorough the meter, which requires a constant 1.35 volts from the battery.

Marc, if you can dig up a diagram or any other manufacturer's info on the meter circuit in the TLS maybe Jes and I can help. I found this page, it doesn't mention the meter circuit but maybe the author can help.
http://www.kyphoto.com/classics/ricoh401.html


Reply

Your probably aware of this site: http://www.butkus.org/chinon/batt-adapt-us.pdf
Certainly the most comprehensive article I've seen on the matter.

It offers a great many options/solutions for different batteries. It actually has a list that says that the Ricoh Singlex, which should follow the same basic design of the TLS, can take the 1.5v. Thanks

~Marc