MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Focusing Screen for Canon 30D
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi all,

I am looking into replacing the focusing screen in my Canon 30D. I have hear about a few names (Haoda, Virtual Village, Katz-Eye, focusingscreen.com ) ...and I am lost. The difference in price is sometimes huge. Which one is really worth it? What do you recommend?

What I would like to know specially is the experience from some other 30D owner that has gone through this process before, what he/she would do or not do and which one they would by if they had a second chance.

...also, if someone has a "spare one", let me know so maybe we can talk about buying it.

As always, many thanks,

Fer


Reply

I bought from this company for my 50D:

http://www.katzeyeoptics.com/item--Canon-30D-Focusing-Screen--prod_30D.html

and it's a good product. Actually I will write a review about it soon.


Reply

Hi Fernando,

since yesterday my 40D is equipped with the katzeye screen. I'm very happy with it.
Focusing is much easier with the split prism ring.
Installation was a piece of cake - done in 5 minutes.

I've ordered the screen with the optibrite treatment, not cheap but still better than buying AF-lenses Laughing

Light metering seems to work better than before (center weighted).

Finally it feels like a camera Very Happy


Reply

I don't see any products for the 5D Confused
Am I missing something?


Reply

F16SUNSHINE a écrit:
I don't see any products for the 5D Confused
Am I missing something?


They don't make it for the 5D, Andy
I asked them some time ago, it seems there are production problems about it... any way Rachael answers very detailed any questions, so you can ask her.


Reply

Hi,

Many thanks to all for the answers. I already looked at tha Katz Ey, and if you buy the screen with that OptiBrite Brightness Enhancement Treatment, ti comes out to a total of 160$. The question is: Is it really worth it? I have seen other screens from other people for half as much...

Those of you who have it and can compare, tell me. Would you buy it again or would you save some money?

Thanks,

Fer


Reply

fernanrl a écrit:
Hi,
Many thanks to all for the answers. I already looked at tha Katz Ey, and if you buy the screen with that OptiBrite Brightness Enhancement Treatment, ti comes out to a total of 160$. The question is: Is it really worth it? I have seen other screens from other people for half as much...
Those of you who have it and can compare, tell me. Would you buy it again or would you save some money?
Thanks,
Fer


hi Fer, I will write a review later.
I can not compare with competition, because I never bought from competition.
I have bought the EE-s screen from Canon for the 5D and the matte area of Katz is the same quality as Canon EEs that is, very good.


Reply

Thanks Orio.

Hopefully you will be ok with that screen. I am more than willing to "splash out" my money on a Katzeye screen...if it is really worth it. If there is in the market any other screen that does just the same with the same quality but cheaper (regardless the name) I will go for it.

But, even so, I am looking forward to reading your review.

Thanks,
Fer


Reply

Why don't you get it without the brightness enhancement? That would be the same quality and significantly cheaper ($105 instead of $160)


Reply

rick_oleson a écrit:
Why don't you get it without the brightness enhancement? That would be the same quality and significantly cheaper ($105 instead of $160)


I have without that. I am planning to replace AF confirm adapters, in A mode all time need to correct exposition with split screen, pretty boring.

I vote for AF confirm instead of split screen.


Reply

Hi,

You may be right Rick...only thing that made me think about this enhancement is the possibility of using small apertures without any problem. This is what they say:

"We provide a process called OptiBrite which is designed to improve the brightness of our screens at small apertures or in dim light. The treatment can increase the apparent brightness by about 2 stops or more in some conditions."

Whether it is worth it, I dont know. The only thing is that, once I spend money, I dont want to think that I could have got something better and really useful once for all.

What do you think? Any comments?

Thanks,

Fer

rick_oleson a écrit:
Why don't you get it without the brightness enhancement? That would be the same quality and significantly cheaper ($105 instead of $160)


Reply

For working with stopped down lenses, optibrite is good.
For isntance I often photograph live events.
In those cases I don't have the time to return to max. aperture to focus then come back to stop down etc.
so I focus directly stopped down.
WIth optibrite you can focus easily even at f/8 if there is a bright day.
also the FA chip of adapters seems to work better at f/8 with optibrite on.
So for me,and also for those who shoot sports or concerts, it is well worth the money
For people doing mostly still photographs (portrait, landscapes, macro) I think optibrite is not useful expense.


Reply

Thanks a lot Orio,

So then, just to also clarify, do you use the Katz eye screen with the adapters with AF chip? I thought that, by replacing the focusing screen, I could forget those and just buy the the plain adapters...Shocked

Do you still need the two of them? Thanks,
Fer


Reply

I have a Virtual Village screen, and I've gotten rid of the one AF-confirming adapter that I had and only use plain adapters now. My biggest problem with the AF adapters was that I was always turning the focus ring as the light blinked, so I went on past the focus point.... it was very slow trying to get it exactly right. It's faster to use the split image screen to focus, and I can outperform the camera's AF system with it.

The only complaint I have about the cheaper VV screen is that I had to shim it to adjust it for perfect focus accuracy. I assume that the more expensive screens would be better in this respect, but I haven't installed one to check.


Reply

For now I have decided against a replacement screen.
But as soon as get some more time to shoot again, I might change my mind. Wink


Reply

Ok guys...it is all your fault. I have just ordered a normal Katzeye for my 30D (no fancy adds-on)...

The only thing that now worries me is the process of replacing it myself. I must I am not clumsy (just lazy to start doing things as my wife says Very Happy ) and apparently is a 5 minute job...

I will keep you posted. Regards,
Fer


Reply

fernanrl a écrit:
Thanks a lot Orio,

So then, just to also clarify, do you use the Katz eye screen with the adapters with AF chip? I thought that, by replacing the focusing screen, I could forget those and just buy the the plain adapters...Shocked

Do you still need the two of them? Thanks,
Fer


I have tested the Cats Eye screen with the last generation of FA adapters and the live view. So in practice a triple check. I have verified 100% precision with my C/Y adapters at all distances.
Do I still need FA chip with Cats screen? Yes, because FA helps with fast action.


Reply

This is not for EOS 30D, I bought Brighscreen (forgot modelnumber) for my
EOS 5D one year ago.

My story: It costed me $250, and the set dod not give me good focus.
It was fair bit of back focus, Brightscreen sent me a shim to fix 5D's
manufacturing variations for their screens, it then gave me front focus.

So I decided to sand the sim down using two wet stones, yes sandwiched
the shim with two stone. It did fix the focus problem.

But the large center prism is always off-centre, I could not fix it at all.
I gave up at that time, 5D's screen cover (not real screen) was already
scratched a lot. Crying or Very sad

I you decide to by one of Brigtscreens, recommend centre micro-prism one.

In the end, I bought Ee-S screen and Nikon DK-17M eyepiece magnifier,
which generally fixed my focusing problem.

End of story.

Orio, Andy, el al. If you want to try my (damn) Brightscreen, send me a PM.


Reply

Hi,

I just received my Katzeye focusing screen for my Canon 30D. I replaced it and now I found out that my camera frontfocuses...how do I fix this? If I use it in AF it takes the pictures fine, just it doesn´t look good in the screen. If I take the pictures MF, then the result is that where I aim is out of focus and whatever is just before it is crispy and clear...why me?????

Any help?????


Thanks,
Fer


Reply

fernanrl a écrit:
Hi,
I just received my Katzeye focusing screen for my Canon 30D. I replaced it and now I found out that my camera frontfocuses...how do I fix this? If I use it in AF it takes the pictures fine, just it doesn´t look good in the screen. If I take the pictures MF, then the result is that where I aim is out of focus and whatever is just before it is crispy and clear...why me?????
Any help?????
Thanks,
Fer


Contact Katzeye for support, they are very responsive.


Reply

They are indeed. I received 5 minutes after I wrote to them a few possible ways to fix it. The first one was that maybe the screen needed to be the other way round since it fits both ways. I changed it and it worked. Now I can tell the difference with my lenses. BTW, I also have now a couple of black dots...probably dust. What do you use to clean your screens/mirrors?
Thanks,
Fer


Reply

Oh great Fer you got it!
I look forward to your report also.
Only use air to remove any dust from the screen. Never touch it directly if you can avoid it.
The mirror you can use air or a swab but be very gentle.


Reply

Orio a écrit:
F16SUNSHINE a écrit:
I don't see any products for the 5D Confused
Am I missing something?


They don't make it for the 5D, Andy
I asked them some time ago, it seems there are production problems about it... any way Rachael answers very detailed any questions, so you can ask her.


"They"?

From the multiple suppliers mentioned in the first post, yes, some of them make 5D focusing screens.

For example these four from focusingscreen.com


Reply

ChrisLilley a écrit:
Orio a écrit:
F16SUNSHINE a écrit:
I don't see any products for the 5D Confused
Am I missing something?


They don't make it for the 5D, Andy
I asked them some time ago, it seems there are production problems about it... any way Rachael answers very detailed any questions, so you can ask her.


"They"?

From the multiple suppliers mentioned in the first post, yes, some of them make 5D focusing screens.

For example these four from focusingscreen.com


Chris, with "they" I meant Katzeye.


Reply

Orio a écrit:
ChrisLilley a écrit:

"They"?


Chris, with "they" I meant Katzeye.


Yes, I thought so. I was concerned that your statement might be taken by others to include all suppliers of focusing screens (the original poster mentioned four). Particularly since you suggested contacting someone (at a supplier that has no 5D screen) to ask about future availability, rather than simply going to a different supplier that does have 5D screens.

The point of my post was to indicate that solutions for 5D are available (and perhaps to help Mr Sunshine also).