MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

P6 shutter closure variation
Voir le sujet précédent :: Voir le sujet suivant  


Reply

My "new" Pentacon Six sometimes overexposes by maybe half a stop on the right side of the frame. Clearly the opening and shutting of the curtains is not completely synchronised.

About 60% of frames show no variation between the two sides, the rest have visible darkening on the right.

I've checked the shutter times against the meter in a Canon 5D and the Pentacon is accurate in all my tests at speeds ranging from 1/60 to 1/1,000, which is a fine performance for a 30-year-old camera. The only problem is this tendency to over-expose on the right side.

Does anybody know whether this is likely to normalise with use, is just one of those things to put up with in an old camera or can be corrected by servicing?


Reply

PaulC a écrit:
My "new" Pentacon Six sometimes overexposes by maybe half a stop on the right side of the frame. Clearly the opening and shutting of the curtains is not completely synchronised.

About 60% of frames show no variation between the two sides, the rest have visible darkening on the right.

I've checked the shutter times against the meter in a Canon 5D and the Pentacon is accurate in all my tests at speeds ranging from 1/60 to 1/1,000, which is a fine performance for a 30-year-old camera. The only problem is this tendency to over-expose on the right side.

Does anybody know whether this is likely to normalise with use, is just one of those things to put up with in an old camera or can be corrected by servicing?


It's called "shutter drag". You could probally have this corrected by a good tech.


Reply

Seems like a lazy second curtain, but it might free up with use - I'd try just working the shutter a couple of hundred times and see if it resolves the problem. If not, repair time.
I've had a couple of cams arrive with this kind of thing and sitting watching the telly while working the camera has 'cured' them. Decades of lying in drawers takes its toll.


Reply

Thanks, guys. Hopefully it will loosen up. Repair shops are not common (cheap or even necessarily reliable) round here and sending it off to Europe would be expensive.