MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

A bit of DIY with the Zenitar
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I've got the flu and decided to stay home today. As I'm getting bored, I though I could share with you the little (non-destructive) modifications made to my Zenitar 16mm.

First of all, it's the K-mount version. Used on a digital Pentax body, you need to use it in manual mode. Most of the time, I forget to push the Ae-l button to mesure the exposure. Therefore, I wanted my lens to behave like a M42 fitted with a K adapter.
Very easy to do : just unscrew the clear filter then remove the black circle (3 screws). You remove the 2 screws fixing the lever and voilŕ, you can use the Av mode.



I then turned my attention to the (lack of) front filter ring.

Some internet sources suggests to fit a 60 to 62 step-up ring but this proved to be the difficult part. B&H list one but the sending costs to Europe are too high. On Ebay, most adapters are for Hasseblad, not compatible with a 60mm thread. I finally found this one : Cliquez ici pour voir sur Ebay. To secure the ring, I cut 2 fine strips of electrician tape which I placed on the hood threads, then I simply screwed the ring. Finished with a strip of electrician tape around the lens to avoid light leaks.

Beauty shot (made with the little brother Samsung S630) :

Fitted with a Cokin P Filter Holder :

No vignetting on my camera (1,5 crop factor).


Reply

Nice findings, Jieffe... I've just seen this thread.
I'm thinking in getting a Zenitar. How do you like it?
Could you please post same samples?

Thanks!.
Jes.


Reply

A useful little tutorial - thanks


Reply

Jesito a écrit:
Nice findings, Jieffe... I've just seen this thread.
I'm thinking in getting a Zenitar. How do you like it?
Could you please post same samples?

Thanks!.
Jes.


If you like the fish-eye effect, a Peleng 8mm is far better for a crop camera like yours. The Zenitar is best for a full frame camera. On a crop camera the effect is mild (if you compare it to the Peleng)


Reply

A Peleng on an APS-C cropped sensor has approx. the same field of view of a 16mm Fisheye on 24x36mm frame.


Reply

Flor27 a écrit:
A Peleng on an APS-C cropped sensor has approx. the same field of view of a 16mm Fisheye on 24x36mm frame.


Exactly, that's the point. Very Happy

Thanks, Florent.


Reply

Jesito a écrit:
Nice findings, Jieffe... I've just seen this thread.
I'm thinking in getting a Zenitar. How do you like it?

Just love that little lens ! Got it more then 10 years ago to use on my MZ5.

Most of the members of this forum have a Zenitar.

The fisheye effect is still there on crop DSLR, just not as dramatic as with a full frame camera.

Citation:
Could you please post same samples?


Not at home right now ... I just took a few pics to illustrate my answer but I can't find my GF card reader Sad It will have to wait 'till she comes back home.


Reply

She came back quickly !

Here it goes ... No masterpieces, just some quick and dirty samples, no sharpening.









Reply

Jieffe, your tutorial is very good, but please can you give me more info about lens hood?

questions:

1 - i must buy simply a "step-up ring 60 to 62"?
(your link to ebay is to a not still avaible auction: can you give me a good link?)

2 - to put the step-ring on the lens, i can simply screw the step-ring on the lens?
or i must use also the 2 fine strips of electrician tape?

3 - i don't understand very well how and where i must place the 2 fine strips of electrician tape.
please, can you gie me info in other easy words?


Reply

The link is dead because my article is 1 year old. You can find a ring here : Cliquez ici pour voir sur Ebay

Don't be distracted by the fact it says "Leica". Just means that 60mm is not a common size, except for some Leica lenses.

Any 60 to 62 ring (or 60 to a bigger size) will do (as long as it doesn't says "Hasselblad").

In fact, the thread you can see inside the little hood has a diameter between 60 and 61 mm.

You use the electrician tape to reduce the inside diameter of the little hood, so the ring can be screwed in the thread with a tight fit. Just put the strips on the hood's thread and screw the ring.

You could also forget the tape and use some epoxy glue to fix the ring on the hood but then it won't be reversible.

The ring also acts as the new hood. You can use a Cokin P adapter as I did (Cokin A is too narrow and causes vignetting).


Reply

Jieffe very very very very very thanks! Smile

but a question: are you afraid that glue can drain out from the electrician tape?
(in particular when you must use zenitar lens in a hot summer day)

(i dont' like a sticky zenitar)


Reply

Well, I live in Belgium, hot summers are not that common Wink

No problem until now with the tape ... but I wouldn't leave lenses baking under the sun, with or without sticky tape Smile

Glad I could help


Reply

Very useful tip thanks Very Happy