MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Light leak affect on exposed vs unexposed film
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Say you are taking a 120 roll in 12 days - one per day with some 50+ years old collapsing or TLR you are not sure the seals are right and that has no double-exposure elimination mechanism.

Which is better? To roll the next frame in front of the dubious bellows / shutter / housing etc. OR: to leave the exposed frame there? Which one is more sensitive to light leak?

(Don't want the fix light leaks / keep camera in the dark - answer Cool )


Reply

As far as any light leak goes, I don't see it making any difference - it will still show anyway, no matter which way you do it.

For a different reason, I usually don't wind on until I've extended the bellows, as the sucking action can pull the film slightly off the backplate and affect register, so it's better to pull forward a fresh piece of taut film.


Reply

Farside a écrit:
As far as any light leak goes, I don't see it making any difference - it will still show anyway, no matter which way you do it.

For a different reason, I usually don't wind on until I've extended the bellows, as the sucking action can pull the film slightly off the backplate and affect register, so it's better to pull forward a fresh piece of taut film.


Theoretically this could mean that with TLR you'd have to focus first - then wind the film .. but just theoretically. Rolling Eyes

But the original question, I have not much chemical training but as a common sense thought - if the silvers (or whatever they are nowdays) start to react to light when the film is exposed - then I would guess that they continue to react more easily. This presupposes that there is some threshold in the chemical reaction. Then again if the exposure "consumes" the reacting agent somehow then the exposed film is not so vulnerable to light leaks.

This is crucially important also when I'll start cooking my own films in the kitchen Smile