| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
ChrisLilley
 Inscrit le: 01 Jan 2008 Messages: 1767 Localisation: Nice, France
|
 Posté: Mer Mar 25, 2009 12:46 pm Sujet du message: Backfocus with split-screen |
|
 Posté: Mer Mar 25, 2009 12:46 pm Sujet du message: Backfocus with split-screen |
|
|
ChrisLilley wrote:
Looks like my recently-installed split-prism focusing screen needs adjustment. Intended focus was half-way along the stems of the letter"m" in Extreme, in line with the bottom of the bar of the letter "e". Actual sharpest focus is midway between "lock" and "SanDisk"
This is the full photo, which shows you nothing at this size::
(100% crop here, to save folks who don't like high resolution images)
Nikon D90, Cosina Voigtländer SL APO-Lanthar 90mm f/3.5 Close Focus plus 49-52mm kood step-up ring plus Nikon 4T close-up lens @ ISO 500, 1/200s f/8
Any suggestions? Thicker/thinner shims (there where two shims when I took out the original screen, which I put back). There are also supposed to be cams somewhere under the mirror which can be adjusted with an allen key. Or maybe just taking it out and putting it back in again? _________________ Camera (ˈkæ mə rə), n. Device for taking pictures in bright light
There are 10 kinds of people in the world: those who understand binary, and those who don’t. Key: Ai-P, Ai, Ai'ed, AiS
Camera: Nikon D90, D40, DK-21M eyepiece, ML-3 remote MF lenses: Nikkor 20mm f/4 K, AI'ed | N.K. Nikkor-N 24mm f/2.8 | Nikkor-N.C 24mm f/2.8 | Nikkor 28mm f/2.8 AiS late model | Арсенал (Arsenal) Мир-24Н (Mir-24N) 35mm f/2 | Cosina Voigtländer Ultron SL II 40mm f/2.0 | Micro-Nikkor 55mm f/2.8 AiS | Zoom-Nikkor 80-200 f/4.5 Ai | ЛЗОС (LZOS) Юпитер-9 (Jupiter-9) 85mm f/2 | Cosina Voigtländer APO-Lanthar 90mm f/3.5 SL | Nikkor-P 105mm f/2.5 pre-Ai, Ai'ed | Micro-Nikkor 105mm f/4 | Schneider Kreuznach Componon 105mm f/5.6 | Nikkor 135mm f/2.8, Ai'ed 1976 model | Nikkor 180mm f/2.8 ED AiS | Арсенал (Arsenal) ТЕЛЕАР-Н (Telear-n) 200mm f/3.5 | Nikkor 300 mm f/4.5 Ai (full equipment list)
Dernière modification par ChrisLilley le Mer Mar 25, 2009 11:35 pm ; modifié 3 fois au total |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Mer Mar 25, 2009 1:25 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 1:25 pm Sujet du message: |
|
|
Orio wrote:
I have the same problem. And I am having a very hard time finding the metal shims. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
koji
 Inscrit le: 21 Juil 2008 Messages: 2108 Localisation: Hiroshima, Japan
Expire: 2012-12-27
|
 Posté: Mer Mar 25, 2009 2:02 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 2:02 pm Sujet du message: |
|
|
koji wrote:
I saw Canon has many different shims for finders of EOS camera,
but forgot their model names. Can you ask Canon for shims directory? _________________ Our Home Page has 18,200 photos in 575 directories today.
Lenses: https://www.pbase.com/kkawakami/top_level_my_lenses |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Mer Mar 25, 2009 2:13 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 2:13 pm Sujet du message: |
|
|
Orio wrote:
| koji a écrit: |
I saw Canon has many different shims for finders of EOS camera,
but forgot their model names. Can you ask Canon for shims directory? |
I'm not sure to understand, Koji. Shims directory on Canon web site? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
koji
 Inscrit le: 21 Juil 2008 Messages: 2108 Localisation: Hiroshima, Japan
Expire: 2012-12-27
|
 Posté: Mer Mar 25, 2009 2:36 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 2:36 pm Sujet du message: |
|
|
koji wrote:
Canon supplies over two dozen shims for each EOS camera, each has 0.01
mm difference. Customer centre mush have those shims. I do not think
they put them on their catalogue (they wont admit camera's true precision
particularly for finders ).
But you can ask customer support centre for shims, thou you may have to
bring your own camera to fix font/rear focus problem.
When I cleaned my 5D finder, I found one shim used inside between penta-
prism and finder frame, finder screen is sitting on this frame with spring loaded
another metal frame to hold the screen.
----
When I bought a BrightScreen, My 5D became back-focus. So I complained it,
then sent me a metal shim used for their screen. BUT 5D became front-focus.
So I sanded this shim to just focus correctly, but their screen was not my taste.
This shim is installed body's finder frame and screen. (I still have this screen!)
Basically (simple conceptual diagram)
.......Penta-prism........
........Canon shim....... This is the shim I am talking about, Canon has many kinds!!!!
........metal frame......
........(shim)................................ extra I installed (it is not there when you buy a camera)
........finder screen...................... ^^^^ When I installed a BrightScreen
........metal frame to hold finder....
....... mirror box.........
..........mirror.............
..........bottom............
Now I use Ee-S screen only, but I attached Nikon DK-17M magnifier to 5D finder eyepiece. _________________ Our Home Page has 18,200 photos in 575 directories today.
Lenses: https://www.pbase.com/kkawakami/top_level_my_lenses
Dernière modification par koji le Mer Mar 25, 2009 2:44 pm ; modifié 4 fois au total |
|
| Haut de page |
|
 |
poilu
 Inscrit le: 26 Août 2007 Messages: 10476 Localisation: Greece
Expire: 2019-08-29
|
 Posté: Mer Mar 25, 2009 2:39 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 2:39 pm Sujet du message: |
|
|
poilu wrote:
the out of focus is not so big, about 2mm
maybe you will mess everything by trying to shim
just focus on the nose to get the eyes in focus |
|
| Haut de page |
|
 |
ChrisLilley
 Inscrit le: 01 Jan 2008 Messages: 1767 Localisation: Nice, France
|
 Posté: Mer Mar 25, 2009 2:58 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 2:58 pm Sujet du message: |
|
|
ChrisLilley wrote:
| poilu a écrit: |
the out of focus is not so big, about 2mm
maybe you will mess everything by trying to shim
just focus on the nose to get the eyes in focus |
Thanks, but the 'just live with it' answer is not really what I was looking for. Here the focus error is about twice as much as the actual depth of field. That's not a workable solution.
If I wanted to shoot blind and hope, I would use film. _________________ Camera (ˈkæ mə rə), n. Device for taking pictures in bright light
There are 10 kinds of people in the world: those who understand binary, and those who don’t. Key: Ai-P, Ai, Ai'ed, AiS
Camera: Nikon D90, D40, DK-21M eyepiece, ML-3 remote MF lenses: Nikkor 20mm f/4 K, AI'ed | N.K. Nikkor-N 24mm f/2.8 | Nikkor-N.C 24mm f/2.8 | Nikkor 28mm f/2.8 AiS late model | Арсенал (Arsenal) Мир-24Н (Mir-24N) 35mm f/2 | Cosina Voigtländer Ultron SL II 40mm f/2.0 | Micro-Nikkor 55mm f/2.8 AiS | Zoom-Nikkor 80-200 f/4.5 Ai | ЛЗОС (LZOS) Юпитер-9 (Jupiter-9) 85mm f/2 | Cosina Voigtländer APO-Lanthar 90mm f/3.5 SL | Nikkor-P 105mm f/2.5 pre-Ai, Ai'ed | Micro-Nikkor 105mm f/4 | Schneider Kreuznach Componon 105mm f/5.6 | Nikkor 135mm f/2.8, Ai'ed 1976 model | Nikkor 180mm f/2.8 ED AiS | Арсенал (Arsenal) ТЕЛЕАР-Н (Telear-n) 200mm f/3.5 | Nikkor 300 mm f/4.5 Ai (full equipment list) |
|
| Haut de page |
|
 |
rawhead
 Inscrit le: 09 Fév 2009 Messages: 1525 Localisation: Boston, MA
Expire: 2014-04-29
|
 Posté: Mer Mar 25, 2009 3:06 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 3:06 pm Sujet du message: |
|
|
rawhead wrote:
I had this same problem, although much bigger, with my K20D and KatzEye. After sending the cam to Pentax (stilll under warranty) for adjustment, and getting it back without anything being done on it (grrrr ), and lightly scratching my $160 replacement screen during the multiple sessions of taking it out and putting it back in, I broke down and sent the whole thing to KatzEye to get them professionally calibrate the MF and install the screen.
Needless to say, my K20D + KatzEye is now BANG on with the MF.
I don't know about Nikon, but with Pentax, I was told I should order the entire range of shims (very cheap) from Pentax service, if I wanted to do the adjustment on my own. _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Haut de page |
|
 |
sichko
 Inscrit le: 20 Juin 2008 Messages: 2475 Localisation: South West UK
|
 Posté: Mer Mar 25, 2009 3:55 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 3:55 pm Sujet du message: |
|
|
sichko wrote:
| Orio a écrit: |
| koji a écrit: |
I saw Canon has many different shims for finders of EOS camera,
but forgot their model names. Can you ask Canon for shims directory? |
I'm not sure to understand, Koji. Shims directory on Canon web site? |
Shims...they are also called washers
http://www.fredmiranda.com/forum/topic/704641.html _________________ John |
|
| Haut de page |
|
 |
LucisPictor
 Inscrit le: 26 Fév 2007 Messages: 17633 Localisation: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Posté: Mer Mar 25, 2009 7:17 pm Sujet du message: |
|
 Posté: Mer Mar 25, 2009 7:17 pm Sujet du message: |
|
|
LucisPictor wrote:
I put two small stripes of tape at the edges of my screen. That has worked fine. _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Haut de page |
|
 |
horvlas
 Inscrit le: 30 Déc 2008 Messages: 202 Localisation: Budapest, Hungary
|
 Posté: Dim Mar 29, 2009 4:04 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 4:04 pm Sujet du message: |
|
|
horvlas wrote:
Hello. I've just bought a split screen to my D80, and I have a 6mm backfocus. Should I install new shim under the new screen, or remove one? (There are two metal shims under the new screen, originally).
Luispictor: Did you use casette tape strip? If I have to install more, how much thickness dou you think? |
|
| Haut de page |
|
 |
Screamin Scott
 Inscrit le: 13 Oct 2007 Messages: 1014 Localisation: Dallas, Georgia USA
|
 Posté: Dim Mar 29, 2009 5:01 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 5:01 pm Sujet du message: |
|
|
Screamin Scott wrote:
I just ordered one of the Chinese screens yesterday although I have a replacement screen to a N90s that I'm about to cut down. The Chinese screen is a split microprism & the N90s screen is an "E" type Matt Fresnel/grid screen...I'll be using them on a Nikon D70s which I'm told has a stock brass shim. The camera however also has a set screw to adjust the focus (using an Allen wrench). From what I've read, the Chinese screen may need focus adjustments, but the Nikon screen I'm going to cut down should not...At least I hope so. I don't want to have to be adjusting the focus screw everytime I decide to swap out screens... _________________ Cameras-Nikon D300, D7100,D610,FE2,FTN ,FT2,N90s, Olympus Pen EP-3 & Olympus OM-D E-M10
Nikkor AF Zooms=28-105/3.5D,28-70/3.5D,35-135/3.5, et al
Nikkor AF //50/1.8,//Nikkor MF//50/2ai,50/1.8ais 50/1.4ai,24/2.8ais,28/2.8ai,28/3.5ai,55microAis/2.8,105/2.5ai,200/4ai,300/4.5ai35-135/3.5Ais,et al
Kiron /Kino made lenses//70-210/4ai,28-105/3.2ai,30-80/3.5ai,Viv 28/2ai,35-85/2.8aiVivS1,105/2.8Ais Dine,24-48/3.8ai VivS1,50-150/3.8aiViv,28-85/2.8aiViv,100/2.8Nai Viv,70-210/3.5Nai Viv,28/2.5ai Viv Komine made Viv//24/2Ais,135/2.8aiCF,28-50/3.5ai,28-90/2.8ai Viv S1,80-200/4.5aiCosina made Viv 19/3.8 Ais...Also Sigma 24/2.8 Ais Tokina made24/2.8ai VivAF Sigma 21-35/3.5,& other lenses... A link to some of my Flickr albums...
https://www.flickr.com/photos/screaminscott/albums |
|
| Haut de page |
|
 |
ChrisLilley
 Inscrit le: 01 Jan 2008 Messages: 1767 Localisation: Nice, France
|
 Posté: Dim Mar 29, 2009 5:57 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 5:57 pm Sujet du message: |
|
|
ChrisLilley wrote:
Having shot some test charts today, the AF (well, the green dot - I only have one AF lens and its a slow one) is fairly close, maybe a bit front focused, but its hard to tell because there is a range of focus where the dot is lit. So, lets say its ok.
The MF appears to be severely off, significant back focus.
To check I just did the same test with my D40 (which also has a split-prism screen); both the green dot and focusing by eye/prisms give similar results, with no significant back/front focus. In other words I can trust what my eyes tell me, to give a correct result.
My D40 had no shims under the the stock screen. My D90 had two different shims. I'm wondering about putting in the new screen with just one shim and seeing if that makes it better or worse. Or fiddling with the adjustment cams. _________________ Camera (ˈkæ mə rə), n. Device for taking pictures in bright light
There are 10 kinds of people in the world: those who understand binary, and those who don’t. Key: Ai-P, Ai, Ai'ed, AiS
Camera: Nikon D90, D40, DK-21M eyepiece, ML-3 remote MF lenses: Nikkor 20mm f/4 K, AI'ed | N.K. Nikkor-N 24mm f/2.8 | Nikkor-N.C 24mm f/2.8 | Nikkor 28mm f/2.8 AiS late model | Арсенал (Arsenal) Мир-24Н (Mir-24N) 35mm f/2 | Cosina Voigtländer Ultron SL II 40mm f/2.0 | Micro-Nikkor 55mm f/2.8 AiS | Zoom-Nikkor 80-200 f/4.5 Ai | ЛЗОС (LZOS) Юпитер-9 (Jupiter-9) 85mm f/2 | Cosina Voigtländer APO-Lanthar 90mm f/3.5 SL | Nikkor-P 105mm f/2.5 pre-Ai, Ai'ed | Micro-Nikkor 105mm f/4 | Schneider Kreuznach Componon 105mm f/5.6 | Nikkor 135mm f/2.8, Ai'ed 1976 model | Nikkor 180mm f/2.8 ED AiS | Арсенал (Arsenal) ТЕЛЕАР-Н (Telear-n) 200mm f/3.5 | Nikkor 300 mm f/4.5 Ai (full equipment list) |
|
| Haut de page |
|
 |
rawhead
 Inscrit le: 09 Fév 2009 Messages: 1525 Localisation: Boston, MA
Expire: 2014-04-29
|
 Posté: Dim Mar 29, 2009 7:02 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 7:02 pm Sujet du message: |
|
|
rawhead wrote:
| ChrisLilley a écrit: |
Having shot some test charts today, the AF (well, the green dot - I only have one AF lens and its a slow one) is fairly close, maybe a bit front focused, but its hard to tell because there is a range of focus where the dot is lit. So, lets say its ok.
The MF appears to be severely off, significant back focus.
To check I just did the same test with my D40 (which also has a split-prism screen); both the green dot and focusing by eye/prisms give similar results, with no significant back/front focus. In other words I can trust what my eyes tell me, to give a correct result.
My D40 had no shims under the the stock screen. My D90 had two different shims. I'm wondering about putting in the new screen with just one shim and seeing if that makes it better or worse. Or fiddling with the adjustment cams. |
Just remember, AF BF/FF issue and MF BF/FF issue are compeltely separate; one won't affect the other. Sounds like you have a MF BF issue, so the only way to fix it is to get a shim with the proper thickness. It's not the fault of the screen, but rather the camera itself. _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Haut de page |
|
 |
horvlas
 Inscrit le: 30 Déc 2008 Messages: 202 Localisation: Budapest, Hungary
|
 Posté: Dim Mar 29, 2009 7:27 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 7:27 pm Sujet du message: |
|
|
horvlas wrote:
Just remember, AF BF/FF issue and MF BF/FF issue are compeltely separate; one won't affect the other. Sounds like you have a MF BF issue, so the only way to fix it is to get a shim with the proper thickness. It's not the fault of the screen, but rather the camera itself.[/quote]
OK, but how much thickness do you think to disappear the 6mm backfocus? |
|
| Haut de page |
|
 |
rick_oleson
 Inscrit le: 26 Fév 2007 Messages: 386 Localisation: Lexington Kentucky USA
|
 Posté: Dim Mar 29, 2009 10:53 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 10:53 pm Sujet du message: |
|
|
rick_oleson wrote:
I used Scotch tape to shim my screen - it's about 0.05mm thick. I managed to get it as close as my eyesight can discern in my particular camera. _________________ I don't know what I want to be when I grow up |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Mar 29, 2009 10:56 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 10:56 pm Sujet du message: |
|
|
Orio wrote:
| rick_oleson a écrit: |
| I used Scotch tape to shim my screen - it's about 0.05mm thick. I managed to get it as close as my eyesight can discern in my particular camera. |
Thanks Rick.
So you think it's safe to stick it on screens?
I am worried about the glue. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
rawhead
 Inscrit le: 09 Fév 2009 Messages: 1525 Localisation: Boston, MA
Expire: 2014-04-29
|
 Posté: Dim Mar 29, 2009 11:10 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 11:10 pm Sujet du message: |
|
|
rawhead wrote:
| horvlas a écrit: |
| Just remember, AF BF/FF issue and MF BF/FF issue are compeltely separate; one won't affect the other. Sounds like you have a MF BF issue, so the only way to fix it is to get a shim with the proper thickness. It's not the fault of the screen, but rather the camera itself. |
OK, but how much thickness do you think to disappear the 6mm backfocus?[/quote]
Well, those 6mm will depend on the focal length you used and from what distance
FYI, I used a Super Takumar 50mm f1.4, shooting at a test chart from arouind 35 cm away, and the front focus was somewhere around 8-10mm. KatzEye did the calibration for me, and they had to change a 0.30mm shim to a 0.15mm shim. _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Haut de page |
|
 |
ChrisLilley
 Inscrit le: 01 Jan 2008 Messages: 1767 Localisation: Nice, France
|
 Posté: Dim Mar 29, 2009 11:42 pm Sujet du message: |
|
 Posté: Dim Mar 29, 2009 11:42 pm Sujet du message: |
|
|
ChrisLilley wrote:
| rawhead a écrit: |
| ChrisLilley a écrit: |
Having shot some test charts today, the AF (well, the green dot - I only have one AF lens and its a slow one) is fairly close, maybe a bit front focused, but its hard to tell because there is a range of focus where the dot is lit. So, lets say its ok.
The MF appears to be severely off, significant back focus.
To check I just did the same test with my D40 (which also has a split-prism screen); both the green dot and focusing by eye/prisms give similar results, with no significant back/front focus. In other words I can trust what my eyes tell me, to give a correct result.
My D40 had no shims under the the stock screen. My D90 had two different shims. I'm wondering about putting in the new screen with just one shim and seeing if that makes it better or worse. Or fiddling with the adjustment cams. |
Just remember, AF BF/FF issue and MF BF/FF issue are compeltely separate; one won't affect the other. |
Yes, that's why I reported the results separately for MF and AF, for each camera.
| rawhead a écrit: |
| Sounds like you have a MF BF issue, so the only way to fix it is to get a shim with the proper thickness. It's not the fault of the screen, but rather the camera itself. |
That or adjusting the MF cam for the mirror stop. _________________ Camera (ˈkæ mə rə), n. Device for taking pictures in bright light
There are 10 kinds of people in the world: those who understand binary, and those who don’t. Key: Ai-P, Ai, Ai'ed, AiS
Camera: Nikon D90, D40, DK-21M eyepiece, ML-3 remote MF lenses: Nikkor 20mm f/4 K, AI'ed | N.K. Nikkor-N 24mm f/2.8 | Nikkor-N.C 24mm f/2.8 | Nikkor 28mm f/2.8 AiS late model | Арсенал (Arsenal) Мир-24Н (Mir-24N) 35mm f/2 | Cosina Voigtländer Ultron SL II 40mm f/2.0 | Micro-Nikkor 55mm f/2.8 AiS | Zoom-Nikkor 80-200 f/4.5 Ai | ЛЗОС (LZOS) Юпитер-9 (Jupiter-9) 85mm f/2 | Cosina Voigtländer APO-Lanthar 90mm f/3.5 SL | Nikkor-P 105mm f/2.5 pre-Ai, Ai'ed | Micro-Nikkor 105mm f/4 | Schneider Kreuznach Componon 105mm f/5.6 | Nikkor 135mm f/2.8, Ai'ed 1976 model | Nikkor 180mm f/2.8 ED AiS | Арсенал (Arsenal) ТЕЛЕАР-Н (Telear-n) 200mm f/3.5 | Nikkor 300 mm f/4.5 Ai (full equipment list) |
|
| Haut de page |
|
 |
rick_oleson
 Inscrit le: 26 Fév 2007 Messages: 386 Localisation: Lexington Kentucky USA
|
 Posté: Lun Mar 30, 2009 12:00 am Sujet du message: |
|
 Posté: Lun Mar 30, 2009 12:00 am Sujet du message: |
|
|
rick_oleson wrote:
| Orio a écrit: |
| rick_oleson a écrit: |
| I used Scotch tape to shim my screen - it's about 0.05mm thick. I managed to get it as close as my eyesight can discern in my particular camera. |
Thanks Rick.
So you think it's safe to stick it on screens?
I am worried about the glue. |
I didn't apply it to the screen, I applied it to the existing brass shim that had been in the camera with the stock screen. Of course, this only works if you need to increase thickness from the existing shim, which happen to be the case for me. There was a good deal of trial and test involved before I could call it finished. _________________ I don't know what I want to be when I grow up |
|
| Haut de page |
|
 |
horvlas
 Inscrit le: 30 Déc 2008 Messages: 202 Localisation: Budapest, Hungary
|
 Posté: Lun Mar 30, 2009 6:47 pm Sujet du message: |
|
 Posté: Lun Mar 30, 2009 6:47 pm Sujet du message: |
|
|
horvlas wrote:
| rawhead a écrit: |
| horvlas a écrit: |
| Just remember, AF BF/FF issue and MF BF/FF issue are compeltely separate; one won't affect the other. Sounds like you have a MF BF issue, so the only way to fix it is to get a shim with the proper thickness. It's not the fault of the screen, but rather the camera itself. |
FYI, I used a Super Takumar 50mm f1.4, shooting at a test chart from arouind 35 cm away, and the front focus was somewhere around 8-10mm. KatzEye did the calibration for me, and they had to change a 0.30mm shim to a 0.15mm shim. |
I Used a Nikkor 1.4/50 at minimum focus distance ~0.5mm, it was 6mm backfocus, then Nikkor 2.5/105 around ~1m, again 6mm backfocus.
I calculated that around 0.1mm need for me by right of your calibration.
Which is the best test? Standard focal length ~50mm, or wide or tele? Minimal focal length or not? |
|
| Haut de page |
|
 |
rawhead
 Inscrit le: 09 Fév 2009 Messages: 1525 Localisation: Boston, MA
Expire: 2014-04-29
|
 Posté: Lun Mar 30, 2009 8:33 pm Sujet du message: |
|
 Posté: Lun Mar 30, 2009 8:33 pm Sujet du message: |
|
|
rawhead wrote:
| horvlas a écrit: |
Which is the best test? Standard focal length ~50mm, or wide or tele? Minimal focal length or not? |
You don't want to go short, because they give you deeper apparent DoF, so it becomes hard to tell. Problem with going tele is that they tend to have large minimum focus distances, and they tend to be darker.
So, basically you want something that has super shallow DoF with relatively short minimum focus distance, which naturally makes 50mm lenses with f1.2/1.4/1.8 etc. apertures the optimum test lens. _________________ Sony α7R, Pentax 67II, Kiev-60, Hasselblad 203FE, 903SWC, Graflex Norita 66, Mamiya M645 1000s, Burke & James 8x10, Graflex Pacemaker Speed Graphic (4x5 and 3x4), Century Graphic (2x3), R.B. Graflex Seried D, Rolleiflex SL66E, Rolleiflex 2.8C Xenotar, Mamiya C330f, a few M42, six P6, three OM, four Hasselblad, two Pentax 67, two Mamiya 645, one Noritar, and a sprinkle of EF. Oh, and an Aero Ektar and Leica Noctilux |
|
| Haut de page |
|
 |
horvlas
 Inscrit le: 30 Déc 2008 Messages: 202 Localisation: Budapest, Hungary
|
 Posté: Lun Mai 25, 2009 9:50 pm Sujet du message: |
|
 Posté: Lun Mai 25, 2009 9:50 pm Sujet du message: |
|
|
horvlas wrote:
Recently I noticed that, when I use a manual focus lens, each lens has different result with the split screen. Volna-9 and Industar-61 at minimum distance(0.2m) f2.8 almost perfect, Helios-44-7 2/58, f2 0.5m: 2mm backfocus. Nikkor 1.4/50 0.6m distance: 4-6mm backfocus. Why??? I also noticed, when I stop down manual mode the blades, the screen darks and the picture in the spit circle moves a bit, when I open the picture in the split circle moves back and displays good. Maybe a split screen fault? (I also noticed this fact with my split screened ZENIT) |
|
| Haut de page |
|
 |
rick_oleson
 Inscrit le: 26 Fév 2007 Messages: 386 Localisation: Lexington Kentucky USA
|
 Posté: Lun Mai 25, 2009 10:57 pm Sujet du message: |
|
 Posté: Lun Mai 25, 2009 10:57 pm Sujet du message: |
|
|
rick_oleson wrote:
That's pretty weird, focusing screens are pretty simple things. All a focusing screen is, is a piece of frosted material located the same distance (through the mirror) as the film plane or image sensor from the lens mount. It doesn't know what lens you have mounted, and it doesn't move up or down when you change lenses. It seems it would either be located correctly (exactly matching the position of the sensor) or not, regardless of what lens you are using. Maybe I'm missing something.
As for the prism darkening when you stop down, of course that's what prisms do. When the lens is open (usually f/5.6 or larger, the cutoff point depends on the design of the specific screen), both sides of the prism are viewing through the lens - one sees light coming through the right hand portion of the lens, the other sees light coming through the left. When the diaphragm closes off the light paths that the prism is using, you begin to view the back side of the aperture blades through the prism. The split image is still doing what it's made to do, but what you are now looking at is black. The rest of the screen gradually darkens too, just because there is less light coming through the lens as you stop it down. _________________ I don't know what I want to be when I grow up |
|
| Haut de page |
|
 |
horvlas
 Inscrit le: 30 Déc 2008 Messages: 202 Localisation: Budapest, Hungary
|
 Posté: Mar Mai 26, 2009 4:56 am Sujet du message: |
|
 Posté: Mar Mai 26, 2009 4:56 am Sujet du message: |
|
|
horvlas wrote:
Yes I know it should darken, but the picture in the split circle is moving a bit to the left, so it displays splitted a bit, when I open to wide, the picture in the circle isn't splitted. |
|
| Haut de page |
|
 |
|
|