| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Nov 22, 2009 6:37 pm Sujet du message: Second developed roll: partial failure |
|
 Posté: Dim Nov 22, 2009 6:37 pm Sujet du message: Second developed roll: partial failure |
|
|
Orio wrote:
The 6x6 was loaded correctly. But I had two problems:
1: Several blotches to ruin the photos. Yes I did tap strongly after every inversion. Could it have been perhaps the prewash? 4-5 blotches on the photos, and several more along the edges where the film edges touch the reel. Perhaps I have to reel in the film more?
2: The film has wrinkles like if it was squeezed. I tend to blame this on my idea of placing a second empty reel on top of the loaded one. I thought that without it, the loaded reel might slip out of the pole during inversions. I had to press quite a bit to fit the second reel inside on top of the expanded one that held the 120 film. Perhaps this pressure caused the wrinkles. Any idea if it's possible to put only one reel in the tank without risk?
Contrast with Rodinal and Agfapan seems lower than with Tmax film and developer. I'll have to print to see the real story though. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
CarbonR
 Inscrit le: 31 Déc 2008 Messages: 1985 Localisation: Auvergne, France
|
 Posté: Dim Nov 22, 2009 6:56 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 6:56 pm Sujet du message: |
|
|
CarbonR wrote:
For #2 : I think it comes from the differences of temperature between the different baths, did you controlled it (or at lest, tried to have a constant temperature) ? _________________ Here lies my signature. |
|
| Haut de page |
|
 |
ludoo
 Inscrit le: 18 Sep 2009 Messages: 1397 Localisation: Milan, Italy
Expire: 2011-12-05
|
 Posté: Dim Nov 22, 2009 6:59 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 6:59 pm Sujet du message: |
|
|
ludoo wrote:
How did you wash the film, and what kind of water/wetting agent did you use for the last wash? |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Nov 22, 2009 9:07 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 9:07 pm Sujet du message: |
|
|
Orio wrote:
| CarbonR a écrit: |
| For #2 : I think it comes from the differences of temperature between the different baths, did you controlled it (or at lest, tried to have a constant temperature) ? |
The baths were all made from the same water, which was around 20° C
Perhaps the rinsing water was different, because it's difficult to get constant temperature out of the tubes. Maybe next time I will have to prepare in advance the rinsing water also. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Nov 22, 2009 9:09 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 9:09 pm Sujet du message: |
|
|
Orio wrote:
| ludoo a écrit: |
| How did you wash the film, and what kind of water/wetting agent did you use for the last wash? |
directly from the tube, and the last wash was made instead with demineralized water with a little Tetenal wetting agent _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
scsambrook
 Inscrit le: 29 Mar 2009 Messages: 2167 Localisation: Glasgow Scotland
Expire: 2011-11-18
|
 Posté: Dim Nov 22, 2009 9:48 pm Sujet du message: Re: Second developed roll: partial failure |
|
 Posté: Dim Nov 22, 2009 9:48 pm Sujet du message: Re: Second developed roll: partial failure |
|
|
scsambrook wrote:
| Orio a écrit: |
The 6x6 was loaded correctly. But I had two problems:
1: Several blotches to ruin the photos. Yes I did tap strongly after every inversion. Could it have been perhaps the prewash? 4-5 blotches on the photos, and several more along the edges where the film edges touch the reel. Perhaps I have to reel in the film more?
|
Orio - what were the blotches like? Undeveloped, or underdeveloped emulsion, or some other kind of mark? You mention the film was wrinkled - could the blotches have been where the film base was contacting the emulsion through distortion in the spiral? That might have kept the developer from accessing the emulsion, partly at least. Sometimes if the emulsion grips tightly in the spiral you can get a similar problem, especially if the film has managed to become corrugated in the loading.
What sort of tank and spiral do you use? _________________ Stephen
Equipment: Pentax DSLR for casual shooting, Lumix G1 and Fuji XE-1 for playing with old lenses, and Leica M8 because I still like the optical rangefinder system. |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Nov 22, 2009 10:14 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 10:14 pm Sujet du message: |
|
|
Orio wrote:
blotches look black in the centre with a halo
I used Kaiser tank and spiral. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Nov 22, 2009 11:02 pm Sujet du message: |
|
 Posté: Dim Nov 22, 2009 11:02 pm Sujet du message: |
|
|
Orio wrote:
This is how one of the blotches looks like:
 _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
marty
 Inscrit le: 09 Avr 2009 Messages: 767 Localisation: Italy
|
 Posté: Lun Nov 23, 2009 1:24 am Sujet du message: |
|
 Posté: Lun Nov 23, 2009 1:24 am Sujet du message: |
|
|
marty wrote:
Nothing comes to my mind about the blotches right now. For what is concerning to put a 2nd reel on top of the first this is correct and must be done with 35mm when doing only one roll (for the reason you rightly thought). With the reel expanded to 120 size there is not enough room to do that (at least with my tank) but no reason either since the volume of chemicals is enough to ensure proper coverage even if the single reel should slip (this is not true with 135). So it's possible the film may have been somewhat squeezed.
Cheers, Marty. _________________ Canon FD
Bodies: AT-1, A-1, T-90
Lenses: nFD 20mm f2.8, 24 f2.8, 28 f2.8, 35 f2, FD 50 f1.8 S.C., 85 f1.8, 100 f2.8, 135 f2.8, 200 f4, 300 f4
|
|
| Haut de page |
|
 |
F16SUNSHINE
 Inscrit le: 20 Août 2007 Messages: 5486 Localisation: Left Coast
Expire: 2011-11-18
|
 Posté: Lun Nov 23, 2009 5:06 am Sujet du message: |
|
 Posté: Lun Nov 23, 2009 5:06 am Sujet du message: |
|
|
F16SUNSHINE wrote:
Hi Orio
I think you will have great success. The tones are lovely.
The blotches to me look like the roll was pinched and making contact with itself as it spiraled around. The blotch areas did not get enough developer.
I've seen the same in my rolls from time to time when use stainless spools and get a poor wind on in the darkroom. _________________ Moderator |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Lun Nov 23, 2009 9:03 am Sujet du message: |
|
 Posté: Lun Nov 23, 2009 9:03 am Sujet du message: |
|
|
Orio wrote:
Andy, I think you may be right. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Laurence
 Inscrit le: 26 Mar 2007 Messages: 4809 Localisation: Western Washington State
Expire: 2016-06-19
|
 Posté: Lun Nov 23, 2009 8:51 pm Sujet du message: |
|
 Posté: Lun Nov 23, 2009 8:51 pm Sujet du message: |
|
|
Laurence wrote:
Notwithstanding the blotch on your sample image - it's a BEAUTY! The tonalities are breathtaking. _________________
Assent, and you are sane;
Demur,—you ’re straightway dangerous,
And handled with a chain.
Emily Dickinson
Cameras and Lenses in Use:
Yashica Mat 124 w/ Yashinon 80/3.5,
CV Apo-Lanthar 90/3.5SL, (Thank you Klaus),
Pentax 645,
Flek 50,
Pentax-A 150
Pentax-A 120 Macro
Voigtlander Vitomatic I w/Color Skopar 50/2.8
Konica TC and zoom lenses (thanks Carsten)
Contax AX
Yashica ML 50/2
Yashica ML 35/2.8
Carl Zeiss Contax 50/1.4
Tamron Adaptall SP 17/3.5
Tamron Adaptall 28/2.5
Tamron Adaptall SP 300/2.8 LD (IF)
|
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mar Nov 24, 2009 8:35 am Sujet du message: |
|
 Posté: Mar Nov 24, 2009 8:35 am Sujet du message: |
|
|
PaulC wrote:
The Patterson tank I used (long ago) had a plastic clip that slid down to keep the spiral in place, there was no need to put another spiral on top. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|