| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
kansalliskala
 Inscrit le: 19 Juil 2007 Messages: 5122 Localisation: Southern Finland countryside
Expire: 2016-12-30
|
 Posté: Sam Nov 21, 2009 2:43 pm Sujet du message: Did you know that superglue is an insulator? |
|
 Posté: Sam Nov 21, 2009 2:43 pm Sujet du message: Did you know that superglue is an insulator? |
|
|
kansalliskala wrote:
Tried to make a 4,5 v battery from 1,5 v cells. It really creates a minimal layer between.
Does the cell explode if I drop a small drop of solder on it? _________________ MF: Kodak DCS SLR/c; Samsung NX10; OM-10; Canon T50
Zuiko 28/3.5, Distagon 35/2.8; Yashica ML 50/2;
Zuiko 50/1.4; S-M-C 120/2.8; Zuiko 135/3.5; 200/5;
Tamron AD1 135/2.8, Soligor 180/3.5; Tamron AD1 300/5.6
Tamron zooms: 01A, Z-210
Yashicaflex C; Київ 4 + Юпитер 8, 11; Polaroid 100; Olympus XA; Yashica T3
Museum stuff: Certo-Phot; Tele-Edixon 135; Polaris 90-190; Asahi Bellows; Ixus IIs
Projects: Agfa Isolette III (no shutter), Canon AE-1D (no sensor),
Nikon D80 (dead), The "Peace Camera"
AF: Canon, Tokina, Sigma Video: JVC GZ-MG275E |
|
| Haut de page |
|
 |
visualopsins
 Inscrit le: 05 Mar 2009 Messages: 11698 Localisation: California
Expire: 2027-07-11
|
 Posté: Sam Nov 21, 2009 4:33 pm Sujet du message: |
|
 Posté: Sam Nov 21, 2009 4:33 pm Sujet du message: |
|
|
visualopsins wrote:
If solder drop shorts battery it will heat fast and possibly explode. Applying enough heat trying to melt solder on terminal takes big solder iron at least 100Watts, not too long, to prevent overheating and damage battery. Suggest purchase batteries with solder terminals already or ready-made pack. Otherwise there is conductive epoxy available. _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Haut de page |
|
 |
Poolhall
 Inscrit le: 25 Fév 2008 Messages: 1296
|
 Posté: Sam Nov 21, 2009 4:35 pm Sujet du message: |
|
 Posté: Sam Nov 21, 2009 4:35 pm Sujet du message: |
|
|
Poolhall wrote:
Yes I did made that mistake myself! I put washers between the cells if they need spacers and then put masking tape around the batteries to join them in a tube like way. Not sure about the solder, could be a problem never tried that. |
|
| Haut de page |
|
 |
Esox lucius
 Inscrit le: 26 Août 2008 Messages: 2441 Localisation: Helsinki, Finland
Expire: 2011-11-18
|
 Posté: Sam Nov 21, 2009 4:44 pm Sujet du message: |
|
 Posté: Sam Nov 21, 2009 4:44 pm Sujet du message: |
|
|
Esox lucius wrote:
You're using tin/lead alloy, right? Melting point is about 180 to 230 degrees depending on the composition, so there is a fair chance you'll heat up the lithium cell above it's working temperature possibly causing it to explode.
Never boiled lithium cells but I've once popped an alkaline battery in outdoor strobe use use (inside a flash gun). Alkalines crackle-pop at about 90 degrees I was told by the flash repairman.
Can you fit a cell holder around them, to connect them? I'd strip one off an old calculator or similar device. Another option would to use solder tabs, they'll take off most of the heat from the drop. http://www.bebek.fi/myymalat.php
If you go for it I recommend solding it with gloves under a glass cupola, wearing protective gear... _________________ Vilhelm
Nikon DSLR: D4, D800, Nikon D3, D70
Nikon SLR: Nikon F100, Nikon FM2n
Nikkor MF: 20/2.8 Ai-S, 24/2 Ai-S, 24/2.8 Ai-S, 28/2 Ai-S, 28/2.8 Ai-S, 35/1.4 AIS, 35/2 Ai-S, 45/2.8 GN, 50/1.2 Ai, 50/1.2 Ai-S, 50/1.4 Ai, 50/1.4 Ai-S, 50/1.8 AI-S "long", 50/1.8 AI-S "short", 55/1.2 Ai, 85/1.4 Ai-S, 85/1.8H, 105/2.5 Ai, 135/2.8Q, 135/3.5 Ai, 180/2.8 Ai-S ED
Nikkor AF/AF-S FX: 14-24/2.8G, 16/2.8D Fisheye, 16-35/4G VR, 17-35/2.8D, 24/1.4G, 24/3.5D PC-E, 24/2.8D, 24-70/2.8G, 28/1.4D, 28/1.8G, 35/1.4G, 35/2D, 50/1.4D, 50/1.4G, 50/1.8G, 60/2.8 Micro, 60/2.8G Micro, 70-200/2.8G VR, 70-200/2.8G VR II, 80-400/4.5-5.6D VR, 85/1.4G, 85/2.8D PC-E Micro, 105/2D DC, 105/2.8G VR Micro, 135/2D DC, 200/2G VR, 200-400/4G VR, 300/2.8G VR, 300/4D ED, 400/2.8G VR, 800/5.6E VR
Nikkor AF/AF-S DX: 10.5/2.8G Fisheye, 12-24/4G, 18-70/3.5-4.5G
Topcor: Auto-Topcor 58/1.4,
Voigtländer SL: 40/2 Ultron, 58/1.4 Nokton, 75/2.5 Color-Heliar, 90/3.5 APO-Lanthar, 125/2.5 APO-Lanthar, 180/4 APO-Lanthar
Zeiss ZF: Planar T* 85/1.4 ZF
M42 SLR: Voigtländer Bessaflex TM
M42: Flektogon 20/4, Flektogon 35/2.4, Tessar 50/2.8 T, Super-Takumar 55/1.8, Biotar 58/2 T, Pentacon 135/2.8, Sonnar 135/3.5
Medium format: several Zeiss Super Ikonta 532/16 Opton-Tessar 80mm f/2.8, Zeiss Ikonta 524/16 Opton-Tessar 75mm f/3.5
Leica: R7, M4, Super-Angulon-R 4/21, Elmarit-R 2.8/28, Summicron-R 2/35, Summicron-M 2/35, Summicron-M 2/50, Elmarit-R 2,8/180 |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Sam Nov 28, 2009 1:30 am Sujet du message: |
|
 Posté: Sam Nov 28, 2009 1:30 am Sujet du message: |
|
|
Farside wrote:
When making up battery packs I've soldered wires onto old carbon-zinc, alkaline, NiCad, and NiMh cells with no problems at all. Just don't leave the iron in contact for too long - a 25W iron is just about adequate, but a soldering gun http://en.wikipedia.org/wiki/Soldering_gun is better if you're quick.
So far I've not had one blow up in my face, but Esox is right to be cautious about lithium cells, imo.
Otoh, if rechargeables will do, you can easily get tagged cells if you check out the electronic and model car/plane/boat hobbiest suppliers' sites. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|