MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Tessar 50mm zebra
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Good evening everyone, I would like to illustrate how I managed to assemble the actuator's pin and its spring of the Carl Zeiss Jena Tessar 50mm f / 2.8 (Zebra) lens. For the CLA I followed various tutorials and videos. In fact, the greatest difficulty I encountered was to reposition the actuator pin and its spring. I loaded the elements and held them together with a food bag strap. I held up the movable hook with gummed paper. I then inserted the device into its housing and partially screwed in the screws. Then I gently extracted, after having shortened it, the clamp and I finally fully tightened the screws obtaining a good final result. I attach some photos. I hope it is useful to some of you.
cesare


Reply

Pics are here: http://forum.mflenses.com/tessar-50mm-zebra-pics-t83982.html