| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Mar Sep 11, 2007 8:37 pm Sujet du message: Still a newbie question on focusing screens |
|
 Posté: Mar Sep 11, 2007 8:37 pm Sujet du message: Still a newbie question on focusing screens |
|
|
Jesito wrote:
Hi everybody!
Just a simple question on focusing screens:
Is the focusing screen used by the autofocus system, or it's only for the manual focus done by human hands?. I mean, if I take the focusing screen out, would the autofocus system work? (obviously with a autofocus lens).
Thanks in advance.
I'm still thinking on what to do with the Virtual Village one. I was about to return it, but on the other hand I don't like to give up.
I wanted to try the focusing screen adjust suggested by Rick, but unfortunately I've been too busy with my work these past days.
On the other hand, I'm feeling my handling of the camera has left it somewhat out of adjust. Even the Planar gives me not so sharp images that used to give. That's only a feeling, I haven't had time to shot enough images. Compared to the ones seen at Veijo's site with the same camera and some of the same lenses, the differences seem to be big.
May a dirty mirror afect focus?. I'm navigating a sea of doubts...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Mar Sep 11, 2007 8:47 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
 Posté: Mar Sep 11, 2007 8:47 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
|
Orio wrote:
| Jesito a écrit: |
Hi everybody!
Just a simple question on focusing screens:
Is the focusing screen used by the autofocus system, or it's only for the manual focus done by human hands?. I mean, if I take the focusing screen out, would the autofocus system work? (obviously with a autofocus lens).
Thanks in advance. |
The focusing screen certainly affects light metering. I am not so sure about autofocus. The one thing I can tell you is that the default screen on the 5D is described as "optimized for slow autofocus lenses", in that the tolerance range was higher than that of traditional screens. I have replaced the standard screen with the EE-S screen (always made by Canon) that is optimized for manual focus and has a steeper transition curve from focused to blurred (therefore allowing for more precise focusing). I have tried my very few autofocus lenses with the new screen and I have not noticed any anomaly. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Mar Sep 11, 2007 10:59 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
 Posté: Mar Sep 11, 2007 10:59 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
|
Jesito wrote:
| Orio a écrit: |
The focusing screen certainly affects light metering. I am not so sure about autofocus. The one thing I can tell you is that the default screen on the 5D is described as "optimized for slow autofocus lenses", in that the tolerance range was higher than that of traditional screens. I have replaced the standard screen with the EE-S screen (always made by Canon) that is optimized for manual focus and has a steeper transition curve from focused to blurred (therefore allowing for more precise focusing). I have tried my very few autofocus lenses with the new screen and I have not noticed any anomaly. |
Orio, thanks for your answer. The best thing I can do to be sure, is to take it out and to try to autofocus... If it does work, that would mean the focusing screen would not be used for autofocus, and then an adapter with focus confirmation could be a valuable tool to see if a focusing screen is focusing properly or not...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
440roadrunner
 Inscrit le: 07 Août 2007 Messages: 52
|
 Posté: Mer Sep 12, 2007 4:32 am Sujet du message: |
|
 Posté: Mer Sep 12, 2007 4:32 am Sujet du message: |
|
|
440roadrunner wrote:
On the Canon Xt I have, the screen can be completely out of the camera, and AF will still work. The only thing the screen affects, so far as I know, is metering, and of course you can't see the red AF lamp flashes onscreen, so you won't know for sure where you have the AF "pointed." I always make sure I'm on center focus, and leave it at that.
The problem I have, is that I'm beginning to wonder about the accuracy of all this. I get good results with my AF lenses, but between my aging eyes, the small viewfinder, I just can't seem to reliably get manual focus. The AF confirm (aftermarket) chips don't seem to be all that accurate, either. I just got "one more" AF confirm chip on a Nikon adapter, and am keen to compare it with my other (Nikon) adapter. |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Mer Sep 12, 2007 7:01 am Sujet du message: Re: Still a newbie question on focusing screens |
|
 Posté: Mer Sep 12, 2007 7:01 am Sujet du message: Re: Still a newbie question on focusing screens |
|
|
peterqd wrote:
| Jesito a écrit: |
Hi everybody!
Just a simple question on focusing screens:
Is the focusing screen used by the autofocus system, or it's only for the manual focus done by human hands?. I mean, if I take the focusing screen out, would the autofocus system work? (obviously with a autofocus lens).
Thanks in advance.
I'm still thinking on what to do with the Virtual Village one. I was about to return it, but on the other hand I don't like to give up.
I wanted to try the focusing screen adjust suggested by Rick, but unfortunately I've been too busy with my work these past days.
On the other hand, I'm feeling my handling of the camera has left it somewhat out of adjust. Even the Planar gives me not so sharp images that used to give. That's only a feeling, I haven't had time to shot enough images. Compared to the ones seen at Veijo's site with the same camera and some of the same lenses, the differences seem to be big.
May a dirty mirror afect focus?. I'm navigating a sea of doubts...
Best regards,
Jes. |
Jes, the autofocus sensors are located in the bottom of the camera body. The main mirror is not completely opaque and some of the light entering through the lens is allowed to pass through the main mirror to a secondary mirror behind, which is used by the autofocus system. This is another reason why the image in the Canon's VF is so dark.
So, apart from the red dots, the focus screen is completely independent of the autofocus system.
Fitting the focus screen is a very delicate and tricky operation and, as I said before, it takes a lot of patience to get it right. I understand your sense of distrust of the focus screen, I had that feeling too. But with patience it will come right.
One other thing went through my mind - your 350D has two shims, yes? My 400D has only one. I'm not sure what differences there between the two cameras, but I am wondering if VVillage may have sent you a 400D one, or maybe they even use the same screen for both cameras! I remember reading somewhere (I think on the Haoda site) that with the 350D you don't need either or both the shims. I'll see if I can find it again.
@roadrunner - My eyes are old too! but I don't think that has any bearing, except that the dim screen in the Canons makes it all the more difficult. Your eye is focussing over the distance from the eyepiece to the surface of the focus screen. The problem about inaccurate focussing is on the other side of the screen, caused by a minute difference in the length of the light paths from the lens to the sensor and from the lens to the screen (via the mirror). For correct manual focussing it is essential these two distances are equal, and adjustment is made by the shims and by the thickness of the screen itself. This is why the AF lenses work correctly, because they are independent of the focus screen. It would be interesting to know what happens if you try focussing with your eyes shut, relying only on the AF-confirm beep. If that gives incorrect results then it has nothing to do with the focus screen. |
|
| Haut de page |
|
 |
lahnet
 Inscrit le: 10 Avr 2007 Messages: 1167 Localisation: Denmark
|
 Posté: Mer Sep 12, 2007 8:02 am Sujet du message: |
|
 Posté: Mer Sep 12, 2007 8:02 am Sujet du message: |
|
|
lahnet wrote:
A little off tropic.
The new Sony A700 can be ordered with a prism MF screen. Together with a bright viewfinder this may be what I have been looking for. |
|
| Haut de page |
|
 |
poilu
 Inscrit le: 26 Août 2007 Messages: 10476 Localisation: Greece
Expire: 2019-08-29
|
 Posté: Mer Sep 12, 2007 8:22 am Sujet du message: |
|
 Posté: Mer Sep 12, 2007 8:22 am Sujet du message: |
|
|
poilu wrote:
Hello Jes,
You have to adjust the brass shim/frame, canon doesn't check shim for cheap dslr and mine was .1 mm off.
If it's adjusted it will work with all focus screen (if not with none)
It's better to adjust with cheap Virtual Village screen as it's easy to make small scratch
If you buy Katz-Eye without adjust you will have the same result as now.
I use rick_oleson way with scotch layer (0.03mm). 3 layers was too much so I used 1 layer of scotch and 1 layer of thicker 'scotch' for perfect result
Download chart at http://focustestchart.com/chart.html so you know after each try where you are. If backfocus add scotch layer, if frontfocus substact
Be carefull to place well the screen after each try to get consistent result.
It's a very stress work but it's the only way unless you get a 5D or maybe a 40D where canon puts corect shims |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Mer Sep 12, 2007 8:27 pm Sujet du message: |
|
 Posté: Mer Sep 12, 2007 8:27 pm Sujet du message: |
|
|
Jesito wrote:
| 440roadrunner a écrit: |
On the Canon Xt I have, the screen can be completely out of the camera, and AF will still work. The only thing the screen affects, so far as I know, is metering, and of course you can't see the red AF lamp flashes onscreen, so you won't know for sure where you have the AF "pointed." I always make sure I'm on center focus, and leave it at that.
The problem I have, is that I'm beginning to wonder about the accuracy of all this. I get good results with my AF lenses, but between my aging eyes, the small viewfinder, I just can't seem to reliably get manual focus. The AF confirm (aftermarket) chips don't seem to be all that accurate, either. I just got "one more" AF confirm chip on a Nikon adapter, and am keen to compare it with my other (Nikon) adapter. |
Hi roadrunner, your case is similar to mine... The small viewfinder is difficult to use for manual focus. I've ordered one of those Nikon DK-21 magnifying viewfinder (as suggested by LucisPictor). I haven't received yet, mail is taking quite long recently.
Nice to know the autofocus and the focus screen are different beasts. So the difficulty is to tune both to show the same.
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Mer Sep 12, 2007 8:39 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
 Posté: Mer Sep 12, 2007 8:39 pm Sujet du message: Re: Still a newbie question on focusing screens |
|
|
Jesito wrote:
Hi Peter,
| peterqd a écrit: |
| Jes, the autofocus sensors are located in the bottom of the camera body. The main mirror is not completely opaque and some of the light entering through the lens is allowed to pass through the main mirror to a secondary mirror behind, which is used by the autofocus system. This is another reason why the image in the Canon's VF is so dark. |
Mmmm... interesting. So if if the mirror is dirty, the amount of light will be affected.
| peterqd a écrit: |
| So, apart from the red dots, the focus screen is completely independent of the autofocus system. |
Good to know. So one can help to tune the other... Using an autofocus lens, I would have to adjust the focusing screen to match the focus of the autofocus.
| peterqd a écrit: |
Fitting the focus screen is a very delicate and tricky operation and, as I said before, it takes a lot of patience to get it right. I understand your sense of distrust of the focus screen, I had that feeling too. But with patience it will come right.
|
.
Thanks for encouraging it. I know it very well now, I've unmounted the focusing screen around 20 times now. I think I could do it now with blind eyes. I'll keep trying, but this time I'll use all the tools at once.
| peterqd a écrit: |
| One other thing went through my mind - your 350D has two shims, yes? My 400D has only one. I'm not sure what differences there between the two cameras, but I am wondering if VVillage may have sent you a 400D one, or maybe they even use the same screen for both cameras! I remember reading somewhere (I think on the Haoda site) that with the 350D you don't need either or both the shims. I'll see if I can find it again. |
Not really, Peter. The documentation that Virtual Village sent me, told that there were some 350D that used two shims, but I've found just one in mine.
| peterqd a écrit: |
| ... For correct manual focussing it is essential these two distances are equal, and adjustment is made by the shims and by the thickness of the screen itself. This is why the AF lenses work correctly, because they are independent of the focus screen. It would be interesting to know what happens if you try focussing with your eyes shut, relying only on the AF-confirm beep. If that gives incorrect results then it has nothing to do with the focus screen. |
I'm still missing the cello tape ajust. Unfortunately I'm getting back home too late these days. (Past weekend I had to work as well), so next weekend will be my next milestone to do some more testing.
Thanks a lot for your comments,
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
rick_oleson
 Inscrit le: 26 Fév 2007 Messages: 386 Localisation: Lexington Kentucky USA
|
 Posté: Jeu Sep 13, 2007 1:33 am Sujet du message: |
|
 Posté: Jeu Sep 13, 2007 1:33 am Sujet du message: |
|
|
rick_oleson wrote:
The single shim in my 400D, if I remember correctly, was .005" thick. If some 350s had more than one shim, I wonder if Canon used different shim thicknesses to adjust the screen for each camera at assembly (I have not found any adjustment at the mirror, where this would normally be done in a Real Metal Camera).
I assume that, however they did the factory adjsutment, the screens are all exactly the same and so interchangeable.... but with an AF system that does not require accurate focus at the screen, I'm not sure. In any case, my Virtual Village screen was off by about .005" ... a second shim would have made it just right. This may just be a coicidence.
As far as focus is concerned, my VV screen is now perfectly acceptable, if it's not perfect it's as close as my focusing ability can detect; for the first time with this camera, I can accurately focus a 50/1.2 lens wide open.
The screen does seem darker than the original. I noticed it particularly with the 18-55 kit zoom at the long end where it's only f/5.6. With that lens, the screen dims visibly as you zoom from wide to tele. I don't recall the original screen doing that. On the other hand, the original screen could NOT focus the f/1.2, so I'll take the dim screen.
In spite of the dim screen, I have not noticed any exposure errors except under one condition: If you meter at a small aperture of below f/5.6, AND you have the meter set to the 'semi-spot' metering mode, you will overexpose substantially because the meter is looking into the blacked-out center prism. Under other conditions, the meter is close enough not to have any meaningful effect on images (the histograms come up nicely bracketed within the dynamic range).
I think it is definitely worth taking some time to try to get the screen adjusted right, if you use a lot of manual focus lenses, especially if they're faster than f/4 and you want to take advantage of the larger apertures. If you find that you can't get the VV screen to work right by adjustment, then I think it's worth investing in a better screen. I think I would personally avoid the brighter ones, though; if they achieve brightness the same way Canon did, they will not be reliable for focus in the matte field at large apertures. I don't have experience with any of them but the VV, so I'll defer to others' experience regarding which screens work well.
By the time I got all this worked out, my VV screen had a couple of scuff marks on it from all of the handling.... if you've had yours in and out 40 times and it's still pretty, that's a good sign. Still, it only takes one bump with a tweezer point to change all that, so be careful.
: ) = _________________ I don't know what I want to be when I grow up |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Sam Sep 15, 2007 3:40 pm Sujet du message: |
|
 Posté: Sam Sep 15, 2007 3:40 pm Sujet du message: |
|
|
Jesito wrote:
Hi everybody:
Some time to go back to the focusing screen:
I've set up the test bench, and here is what I've gotten so far:
I printed the focusing chart from the Nikon article.
Trying with the Planar 50mm, but I've got a DOF too wide, so I've moved to the Sonnar 135mm.
This first chart shot is with the original CANON screen, focusing on the middle horizontal black line.
This second one, with the Virtual Village one, correctly fitted, and also focusing the same place:
To my impression, with the VV one, the focus gets a little farther, so I understand this is backfocus and I should add cello tape...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
poilu
 Inscrit le: 26 Août 2007 Messages: 10476 Localisation: Greece
Expire: 2019-08-29
|
 Posté: Sam Sep 15, 2007 5:14 pm Sujet du message: |
|
 Posté: Sam Sep 15, 2007 5:14 pm Sujet du message: |
|
|
poilu wrote:
hello Jes,
your vv is backfocusing but is already fine. The 'Focus Here' is in focus so even if you don't change nothing you should have already fine result.
Add a layer of tape on 1 side of the shim (only left & right border) and use a cutter to shave scotch near shim and check if you frontfocus  |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Sam Sep 15, 2007 5:50 pm Sujet du message: |
|
 Posté: Sam Sep 15, 2007 5:50 pm Sujet du message: |
|
|
Jesito wrote:
| poilu a écrit: |
hello Jes,
your vv is backfocusing but is already fine. The 'Focus Here' is in focus so even if you don't change nothing you should have already fine result.
Add a layer of tape on 1 side of the shim (only left & right border) and use a cutter to shave scotch near shim and check if you frontfocus  |
Hi Poilu,
Well, not so fine. At short distances and with a wide DOF, the pictures are almost in focus. But if I try to focus something far, (near infinity) the results are not good. Or if DOF is narrow.
I've put the SIGMA autofocus lens on the camera, and the autofocus confirms that: Out of focus for far targets.
So I've unmounted the VV screen, and put some cello tape on it. I've put it on the backside of the shim. Unfortunately, when trimming out the excess of tape, I've slightly bended the shim (one of the thinner sides). I've pressed it against a metal base, and almost strighten it up again. (there is still a small blob on it).
Put again into the camera.
Horror!, It was extremely dirty, kind of oil marks...
Before taking it out for cleaning, I measured again against the focus chart:
Now, the camera is heavily frontfocusing... Checked with the autofocus lens, confirm this.
So, again taking out the cello tape. Maybe is too thick...
Taking out the cello tape has proven to be not for faint hearts... Luckily I own some eye magnifiers, the ones used in jewelry x3, x4, x5 and x10. With the use of the magnifier and the cutter, I've peeled off the tape. But the adhesive has remained there...
With the help one of the microfiber fabric pieces that I use for lens cleaning and some Isopropilyc alcohol I've been able to clean the shim almost as shiny as it was before. I've used this alcohol to clean the focus screen as well, seems to be okay now. I've put the screen again in the camera, and severe backfocus (as confirmed by the autofocus lens) again.
So this is enough stress to me for a single day.
I don't give up, but I'll look for a thinner cello tape and a replacement shim for the case of irreversible damages...
Not a wasted afternoon, the best of all is that one learns a lot with these experiences. And hearth gets braver that before.
Thanks to all for your suggestions, poilu, rick, peter, roadrunner, orio...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3
Dernière modification par Jesito le Dim Sep 16, 2007 9:46 am ; modifié 1 fois au total |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Sam Sep 15, 2007 7:18 pm Sujet du message: |
|
 Posté: Sam Sep 15, 2007 7:18 pm Sujet du message: |
|
|
peterqd wrote:
| Jesito a écrit: |
| I don't give up, but I'll look for a thinner cello tape and a replacement shim for the case of irreversible damages... |
Did you use 3M Scotch "Magic Tape" Jes? It's translucent, not clear like Sellotape tape, and much finer and thinner.
I was a little concerned about Rick's idea of Magic Tape because of the adhesive, which degrades over time. But it must very fiddly to fit a .005" shim without any adhesive. Maybe there's a better answer, how about a tiny dab of Loctite threadlock on the edge of the shim, not the face. My grandfather, who was a precision engineer, used cigarette papers for adjusting things like this. I think he used to say they are .001" thick. Aluminium cooking foil might be even thinner. |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Sam Sep 15, 2007 8:24 pm Sujet du message: |
|
 Posté: Sam Sep 15, 2007 8:24 pm Sujet du message: |
|
|
Jesito wrote:
| peterqd a écrit: |
| Jesito a écrit: |
| I don't give up, but I'll look for a thinner cello tape and a replacement shim for the case of irreversible damages... |
Did you use 3M Scotch "Magic Tape" Jes? It's translucent, not clear like Sellotape tape, and much finer and thinner.
I was a little concerned about Rick's idea of Magic Tape because of the adhesive, which degrades over time. But it must very fiddly to fit a .005" shim without any adhesive. Maybe there's a better answer, how about a tiny dab of Loctite threadlock on the edge of the shim, not the face. My grandfather, who was a precision engineer, used cigarette papers for adjusting things like this. I think he used to say they are .001" thick. Aluminium cooking foil might be even thinner. |
Hi Peter, thanks for answering.
No I didn't use the 3M one, it's not easy to find here. I use a local one called "Crystal Clear Tape". Not sure how thick it is. I'll look for the 3M one, I know I should go to a professional design shop to get it.
I like the aluminium foil idea. Let me think how to keep it in place. Any adhesive would increase the thickness...
Maybe doing a little fold, and keeping the shim pressing the foil against the wall could keep it in place, probably difficult to setup.
I'm liking this idea more and more.
Thanks for pointing it!
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
440roadrunner
 Inscrit le: 07 Août 2007 Messages: 52
|
 Posté: Dim Sep 16, 2007 3:52 am Sujet du message: |
|
 Posté: Dim Sep 16, 2007 3:52 am Sujet du message: |
|
|
440roadrunner wrote:
I wonder if you could just use the shim for a pattern, and razor cut (exacto knife) some paper?
I'm off to find my micrometer |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Dim Sep 16, 2007 6:05 am Sujet du message: |
|
 Posté: Dim Sep 16, 2007 6:05 am Sujet du message: |
|
|
Jesito wrote:
| 440roadrunner a écrit: |
I wonder if you could just use the shim for a pattern, and razor cut (exacto knife) some paper?
I'm off to find my micrometer |
Yes, I could try it with the alu foil... My impression is that ordinary paper (A4 or similar) will be too thick, as it was the common cello tape.
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Jeu Sep 20, 2007 11:13 am Sujet du message: |
|
 Posté: Jeu Sep 20, 2007 11:13 am Sujet du message: |
|
|
Farside wrote:
| Jesito a écrit: |
| 440roadrunner a écrit: |
I wonder if you could just use the shim for a pattern, and razor cut (exacto knife) some paper?
I'm off to find my micrometer |
Yes, I could try it with the alu foil... My impression is that ordinary paper (A4 or similar) will be too thick, as it was the common cello tape. |
On my 10D, I found the VV screen useless without the Canon shim and even with it, it was back-focusing too much. I attached a couple of tiny slivers of electrical insulating tape to each short side of the shim and tried again. It was better, but two thicknesses per side solved the problem. I haven't bothered mic'ing it, but I'd guess the thickness is now twice the original shim.
Overall, the VV screen is great value for money - there was no way I was going to pay the money for a Katz-Eye screen, or even a Haoda one come to that, especially when I'd been used to swapping screens in and out of manual cameras for a cost of pennies. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Jeu Sep 20, 2007 12:07 pm Sujet du message: |
|
 Posté: Jeu Sep 20, 2007 12:07 pm Sujet du message: |
|
|
Jesito wrote:
| Farside a écrit: |
| Jesito a écrit: |
| 440roadrunner a écrit: |
I wonder if you could just use the shim for a pattern, and razor cut (exacto knife) some paper?
I'm off to find my micrometer |
Yes, I could try it with the alu foil... My impression is that ordinary paper (A4 or similar) will be too thick, as it was the common cello tape. |
On my 10D, I found the VV screen useless without the Canon shim and even with it, it was back-focusing too much. I attached a couple of tiny slivers of electrical insulating tape to each short side of the shim and tried again. It was better, but two thicknesses per side solved the problem. I haven't bothered mic'ing it, but I'd guess the thickness is now twice the original shim.
Overall, the VV screen is great value for money - there was no way I was going to pay the money for a Katz-Eye screen, or even a Haoda one come to that, especially when I'd been used to swapping screens in and out of manual cameras for a cost of pennies. |
Wouldn't be the electrical insulating tape too thick for this?
I tried the same with normal cello tape and I got frontfocus instead of backfocus...
Best regards,
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Jeu Sep 20, 2007 4:41 pm Sujet du message: |
|
 Posté: Jeu Sep 20, 2007 4:41 pm Sujet du message: |
|
|
Farside wrote:
[quote="Jesito"]
| Farside a écrit: |
Wouldn't be the electrical insulating tape too thick for this?
I tried the same with normal cello tape and I got frontfocus instead of backfocus... |
Depends on the tape - some are thicker than others. Actually, now I recall properly, it was farm baling tape - a thin but very strong black adhesive tape, nearly 100mm in width on the roll, used for sealing up the large round bales of grass in giant plastic cylinders . It's thinner than ins tape, right enough.
It does work though, which came as a relief. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
Jesito
 Inscrit le: 24 Août 2007 Messages: 5745 Localisation: Olivella, Catalonia, (Spain)
Expire: 2015-01-07
|
 Posté: Jeu Sep 20, 2007 10:01 pm Sujet du message: |
|
 Posté: Jeu Sep 20, 2007 10:01 pm Sujet du message: |
|
|
Jesito wrote:
| Farside a écrit: |
It does work though, which came as a relief. |
Empirism, that's the best approach. If it does work, it's right!.
Thanks for the idea.
Best regards.
Jes. _________________ Jesito, Moderator
Jesito's backsack:
Zooms Sigma 70-300, Tamron 35-135 and 70-210 short, 70-210 long, 28-70 CF Macro, 35-70, 35-80, Vivitar 70-210 KA, Tamron 70-250.
Fixed Industar-50, , Tamron 24mm, Tamron 135mm, Sands Hunter 135mm, Pancolar 50mm, Volna-3, many Exakta lenses
DSLR SIGMA SD9 & SD14, EOS 5D, Sony A700 and NEXF3, Oly E-330, E-400, E-450, E-1
TLR/6x6/645 YashicaMat, Petri 6x45, Nettar, Franka Solida, Brilliant
SLR Minolta X300, Fuji STX II, Praktica VLC3, Pentax P30t, EXA500, EXA 1A, Spotmatic(2), Chinon CM-4S, Ricoh, Contax, Konica TC-X , Minolta 5000, 7000i, 3Sxi, EOS 500 and CX
Rangefinders Chinon 35EE, Konica C35 auto, Canonet 28, Yashica Lynx, FED-2, Yashica electro 35, Argus C3 & C4, Regula Cita III, Voigtlander Vitoret (many), Welta Welti-I, Kodak Signette 35, Zorki-4, Bessa-R & L, Minolta Weathermatic, olympus XA2
Compact Film Konica C35V, Voigtlander Vitorets, Canon Prima Super 105, Olympus XA2 and XA3
Compact Digital Olympus C-5050, Aiptek Slim 3000, Canon Powershot A540, Nikon 5200, SIGMA DP1s, Polaroid X530, IXUS55, Kodak 6490, Powershot G9 and G10
CSCCanon EOS-M, Samsung NX100 and NX210, Lumix G5, NEX-F3 |
|
| Haut de page |
|
 |
|
|