| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
indianadinos
 Inscrit le: 06 Juil 2008 Messages: 1310 Localisation: Toulouse, France
Expire: 2011-12-05
|
 Posté: Mar Mar 16, 2010 10:30 pm Sujet du message: Aaaaagh, i need your help ... |
|
 Posté: Mar Mar 16, 2010 10:30 pm Sujet du message: Aaaaagh, i need your help ... |
|
|
indianadinos wrote:
Hi all,
A friend of mine borrowed my Flek 20/2.8 and managed (apparently, trying to remove a filter he screwed in) to unscrew the whole optical group from the lens, which means that now i have my lens in two parts: the barrel and the inner optical group ...
I survived the choc (with my friend retaining me from strangling him), and now i'm stuck with the lens (i had a link on a Flickr set with the service tutorial, but the owner seems to have removed the pictures) ...
Anyone knows where to start to rebuild it properly ? Do i have to disassemble the focusing barrel, or i can try to screw in the optical group ?
The technique i suggested to another owner a few time ago (simply screwing in the optical group) doesn't seem to work well (i was thinking i fixed mine, but maybe it wasn't) ...
Thanks in advance to all for your replies ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Haut de page |
|
 |
Arkku
 Inscrit le: 28 Fév 2007 Messages: 1416 Localisation: Helsinki, Finland
|
 Posté: Mar Mar 16, 2010 11:51 pm Sujet du message: |
|
 Posté: Mar Mar 16, 2010 11:51 pm Sujet du message: |
|
|
Arkku wrote:
So, can you just screw it back in? If so, and you have incorrect focus (e.g. won't reach infinity or will go over it), unscrew again and try again; you need to put it on specific threads to get the same focus.
(This is just speculation based on general experience, not this particular lens.)
Dernière modification par Arkku le Mer Mar 17, 2010 8:33 pm ; modifié 1 fois au total |
|
| Haut de page |
|
 |
Kathmandu
 Inscrit le: 09 Déc 2009 Messages: 1479 Localisation: (Kathmandu,Nepal. Currently)Pacific Northwest, USA
Expire: 2012-04-08
|
 Posté: Mer Mar 17, 2010 1:18 am Sujet du message: |
|
 Posté: Mer Mar 17, 2010 1:18 am Sujet du message: |
|
|
Kathmandu wrote:
Lol@
| Citation: |
| I survived the choc (with my friend retaining me from strangling him) |
I do feel sorry for you.
I am sure you've seen this if its even similar I dont know
http://www.kolumbus.fi/uusilehto/img/lenses/zeiss/disass/
In this -looks like the focusing barrel has to come off and the front assembly unscrews from the aperture and rear cell. If yours is similar looks like the front assembly has to to screw back to the aperture and rear cell first , and then the focusing barrel screws back on last.
I have not personally opened or closed one of these before myself.
Regards |
|
| Haut de page |
|
 |
mo
 Inscrit le: 27 Août 2009 Messages: 8979 Localisation: Australia
Expire: 2016-07-30
|
 Posté: Mer Mar 17, 2010 4:19 am Sujet du message: |
|
 Posté: Mer Mar 17, 2010 4:19 am Sujet du message: |
|
|
mo wrote:
I feel your pain ...no more loaning out your lens?? _________________ Moira, Moderator
Fuji XE-1,Pentax K-01,Panasonic G1,Panasonic G5,Pentax MX
Ricoh Singlex TLS,KR-5,KR-5Super,XR-10
Lenses
Auto Rikenon's 55/1.4, 1.8, 2.8... 50/1.7 Takumar 2/58 Preset Takumar 2.8/105 Auto Takumar 2.2/55, 3.5/35 Super Takumar 1.8/55...Macro Takumar F4/50... CZJ Biotar ALU M42 2/58 CZJ Tessar ALU M42 2.8/50
CZJ DDR Flektogon Zebra M42 2.8/35 CZJ Pancolar M42 2/50 CZJ Pancolar Exakta 2/50
Auto Mamiya/Sekor 1.8/55 ...Auto Mamiya/Sekor 2/50 Auto Mamiya/Sekor 2.8/50 Auto Mamiya/Sekor 200/3.5 Tamron SP500/8 Tamron SP350/5.6 Tamron SP90/2.5
Primoplan 1.9/58 Primagon 4.5/35 Telemegor 5.5/150 Angenieux 3.5/28 Angenieux 3,5/135 Y 2
Canon FL 58/1.2,Canon FL85/1.8,Canon FL 100/3.5,Canon SSC 2.8/100 ,Konica AR 100/2.8, Nikkor P 105/2.5
|
|
| Haut de page |
|
 |
Anu
 Inscrit le: 14 Avr 2009 Messages: 879
|
 Posté: Mer Mar 17, 2010 4:29 pm Sujet du message: |
|
 Posté: Mer Mar 17, 2010 4:29 pm Sujet du message: |
|
|
Anu wrote:
| Arkku a écrit: |
So, can you just screw it back in? If so, and you have incorrect focus (e.g. won't reach infinity for will go over it), unscrew again and try again; you need to put it on specific threads to get the same focus.
(This is just speculation based on general experience, not this particular lens.) |
When I accidently unscrewed the front element(s) off my Flek 20/2.8, screwing it back caused infinity problems. The fix was to loosen (or was it tighten?) the infinity stopper screw, rotating an internal part that's normally blocked by it (of course first to the wrong direction ), fixing the screw again and then reassembling the objective. The image quality improved greatly.
My hypothesis is that in the CZJ factory they had this lazy assembly worker who, instead of bothering to adjust the infinity properly, just screwed the front piece a bit loosely on. This hypothesis would explain the rather drastic differences in peoples experiences of this lens when used wide open. I wonder, if this copy of the original poster is also one which doesn't deliver as much as expected (especially wide open)? |
|
| Haut de page |
|
 |
indianadinos
 Inscrit le: 06 Juil 2008 Messages: 1310 Localisation: Toulouse, France
Expire: 2011-12-05
|
 Posté: Mer Mar 17, 2010 6:08 pm Sujet du message: |
|
 Posté: Mer Mar 17, 2010 6:08 pm Sujet du message: |
|
|
indianadinos wrote:
Hi all,
| Arkku a écrit: |
| So, can you just screw it back in? |
Yes, now that i remembered/noticed that the optical group screws in counterclockwise now i can ...
Of course, i have to fix it now for infinity focus ...
| Kathmandu a écrit: |
| I do feel sorry for you. |
Me too ...
| Kathmandu a écrit: |
| I am sure you've seen this if its even similar I dont know ... |
Yes, but the lens assembly seems to be not the same ...
| Mo-Fo a écrit: |
| I feel your pain ...no more loaning out your lens?? |
Niet, not even my Primoplan 50 ...
| Anu a écrit: |
| When I accidently unscrewed the front element(s) off my Flek 20/2.8, screwing it back caused infinity problems. The fix was to loosen (or was it tighten?) the infinity stopper screw, rotating an internal part that's normally blocked by it (of course first to the wrong direction Wink ), fixing the screw again and then reassembling the objective. The image quality improved greatly. |
Do you have a photosequence of the service ?
Thanks to all for your replies ...
Cheers _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Mer Mar 17, 2010 6:39 pm Sujet du message: |
|
 Posté: Mer Mar 17, 2010 6:39 pm Sujet du message: |
|
|
peterqd wrote:
Dino, I've had this lens apart but I don't have any pictures. If the front lens block has simply unscrewed it shouldn't have affected infinity focus and you can just screw it back in.
Infinity focus is adjusted with the filter ring and I fear your friend has probably turned it when he was trying to unscrew the filter. The filter ring is clamped by a large screw ring like a lens ring. It has two notches and has to be tightened with a lens spanner. The annoying part is that the front lens block has to be in place in order to check the adjustment, and this makes getting at the notches very awkward. You need the type of spanner with the points closer together so that they can reach under the large front lens (I hope you understand that!).
I think maybe you should screw the lens block back in first and check infinity focus. With some luck it will be OK.
I haven't fixed mine yet. I'll try and take some pics for you later this evening. I don't have time right now. _________________ Peter - Moderator |
|
| Haut de page |
|
 |
indianadinos
 Inscrit le: 06 Juil 2008 Messages: 1310 Localisation: Toulouse, France
Expire: 2011-12-05
|
 Posté: Jeu Mar 18, 2010 11:18 pm Sujet du message: |
|
 Posté: Jeu Mar 18, 2010 11:18 pm Sujet du message: |
|
|
indianadinos wrote:
Hi Peter,
Thanks very much for your precious hints ... I will try to fix the lens this sunday (i fear i will not have the time to do it before) ...
It would be very nice if you could post some pics while fixing the lens ...
Many thanks again _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Haut de page |
|
 |
CarbonR
 Inscrit le: 31 Déc 2008 Messages: 1985 Localisation: Auvergne, France
|
 Posté: Ven Mar 19, 2010 11:12 am Sujet du message: |
|
 Posté: Ven Mar 19, 2010 11:12 am Sujet du message: |
|
|
CarbonR wrote:
Say to your friend he has to buy you a new lens at least in the same condition than yours, and you left him your 20/2.8 parts  _________________ Here lies my signature. |
|
| Haut de page |
|
 |
|
|