MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Exakta lens on Sony a200
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi,

I am getting a really good deal on lenses with Exakta mount. Does anyone know any adapter that can be used to mount them on sony dslr (minolta A mount) which allow infinity focus without glass element in it. ( Too much to ask??)

Ash


Reply

What Exakta mt. lens were you thinking of converting to Sony Alpha mount. I have converted 2 Sankyo Kohki Komuras and a Primagon.


Reply

Meyer 200mm/4 in exakta mount.


Reply

I hear that its a beautiful lens,and produces superlative images,congratulations ,. Unfortunately I have not looked at any Meyer 200mm f 4's myself .
I know a quick/ fairly easy way to achieve what your are trying to gain in by cleanly gluing(epoxy) a M39 to M42 adapter (which is a ring basically that has M39 female threads inside and M42 male threads on the outside) around the Exakta bayonet .The ring should fit well , cushion it with epoxy,and check to see that its centered. I used Gorilla quick setting epoxy and had to make sure I glued and cleaned it in good time. You could then screw on a generic M42 to Sony adapter once the epoxy has set good.

You will have to shave/sand the M42 to Sony adapter down a little to attain infinity (that was my case when I did the same on my primagon), unless you find out how to adjust for infinity by opening the lens.

This is an image of the Exakta Mt. Primagon I have converted (before and after) -you will notice the M39 to M42 adapter ring I have glued around the Exakta flange on the picture on the right.
All excess epoxy was wiped off with denatured alcohol and the lens was cleaned up too .



I had to sand down the M42 to Sony adapter down evenly untill I reached infinity as I was short of attaining infinity.Most adapters are made of soft metal that can be sanded down fairly easily-making sure its even is very important

I am sure you will hear from other members here , who have prior experience with the lens you are talking of ."Luisageria" is a member here who you might benefit from PMing, he does a lot of interesting conversions and adaptations -Good luck.


P.S- You can remove the glued M39 to M42 ring quite easily if you discover a better way of modifying the mount - using some denatured alcohol and some prying with a very thin blade and careful notion.

I would take caution when first mounting your lens on because I am assuming that its a heavy piece of glass that youre mounting on your A200. I would use your best judgement to see if the epoxy is set well enough to hold the lens- so please be cautioned about that. Pls check online to see the strength of epoxy and use your common sense.The Primagon lens I modified is a lot lighter than your lens.

Hope this helps.


Reply

Or buy a beat up / trashed Meyer / Pentacon 135/2.8 or 200/4 in M42 mount and simply unscew the mount on each and swap...


Reply

Shrek a écrit:
Or buy a beat up / trashed Meyer / Pentacon 135/2.8 or 200/4 in M42 mount and simply unscew the mount on each and swap...


1+
Klaus


Reply

Thanks for that idea! I've now got a previously useless Primotar 135 that fits my camera while my Pentacon 100 (which simply wouldn't focus) is even more broken than before.

The Primotar won't focus beyond 6m because the long sliding rear baffle in the lens can't move through the new mount (the mount would need machining or the baffle would need chopping). However, the registration distances seem to be identical, so the distance marks are accurate.

PS: The Exacta mount on the Primotar is held on by three screws (like the Pentacon 100), the Pentacon 135 has four screws, so it is necessary to check that a potential replacement mount has the same arrangement as the Exacta one.

OOOPS! Just remembered, that was a Practina mount, not an Exacta one Embarassed . Anyway, it worked.


Reply

http://cgi.ebay.de/Pentacon-EXA-1b-mit-Teleobjektiv-und-Zubehoer-von-1985_W0QQitemZ320505671563QQcmdZViewItemQQptZDE_Elektronik_Computer_Foto_Camcorder_Objektive_PM?hash=item4a9fa06f8b

Maybe something like this lot.... Camera with missing nameplate. Could probably go for little money.

Klaus