MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Zenit E - focusing and/or mirror problem
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello,

I encountered a problem with my old Zenit E. It doesn't focus correctly. I made some tests with it and compered the test with the results from my good M42 camera (Porst Reflex TL, which fosuses correctly).
The test's result says that the Zenit backfocuses about ~2-3cm (instead of 0.33m it focuses at 0.36mm - I made the tests with a Pentacon 1.8/50 lens and used the writings on the barrell). Now, I know, the Zenit has a little screw under the mirror. So, I had to screw it down until I obtain the same focusing distance as the Porst and the scale on the lens.
So I did it, and now it focuses correctly. But here starts another problem. When I fire the mirror doesn't move. The shutter works correctly but the camera doen't have the ability to lift up the mirror. Only if I unscrew that screw (at the same old position) on which the mirror sits when its down, the camera can lift the mirror, but in this case I can not focus well.
Anything else is working correctly.
What can I do (except to buy another body Smile ) ?
Thank you all.

Cosmin.