MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Olympus OM 50mm 1.8 with stuck aperture ring. Can I fix it?
Voir le sujet précédent :: Voir le sujet suivant  


Reply

My father handed down a few lenses from his old olympus system. One of the lenses is the 50mm 1.8 "made in japan", supposed to be the best version of said lens. The aperture ring is set at 2.8 and stuck in that position, aperture diaphram moves freely from wide open to 2.8 position using the DOF preview button. The ring doesn't seem to be "jammed" in that position as it still jiggles a little, it simply won't budge from that setting despite my best efforts. The lens is cheaply available and a professional repair seems pointless as it might run more than the lens is worth. Can anyone familiar with OM lenses offer any advice?


Reply

You able to clean it. I think it's blades are dirty only, to clean blades not any easy game, takes time and need some handy experience, in case of you I will buy a new one instead of waste time with it.


Reply

It's very easy to dismantle the front and take the ring off. It might be just the little ball bearing that is stuck, in which case an easy fix. Worth a try...


Reply

kappa546 a écrit:
My father handed down a few lenses from his old olympus system. One of the lenses is the 50mm 1.8 "made in japan", supposed to be the best version of said lens. The aperture ring is set at 2.8 and stuck in that position, aperture diaphram moves freely from wide open to 2.8 position using the DOF preview button. The ring doesn't seem to be "jammed" in that position as it still jiggles a little, it simply won't budge from that setting despite my best efforts. The lens is cheaply available and a professional repair seems pointless as it might run more than the lens is worth. Can anyone familiar with OM lenses offer any advice?


If you are willing to consign this lens to the bin and buy another then you have nothing to lose? I would certainly say it is worth attempting a fix. At least you will learn how lenses come apart.

Then again, the cost of a decent set of screwdrivers to use on this job is probably more than a replacement lens, so maybe you should only do it if you want the experience?