MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Thanks to Moira...
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I now have both my Trips with OEM hoods:



Moira, the one on the right is the one you sent, just so you know. Wink

Thanks! Very Happy


Reply

What is the purpose of the large and small cutouts in the hoods? Question


Reply

Scheimpflug a écrit:
What is the purpose of the large and small cutouts in the hoods? Question


Blimey, I 'aven't the fookinest idear! Laughing Less wind resistance, maybe? Smile

Damn good question, Scheimpflug!


Reply

Yes, it is puzzling. Wink

I've seen plenty of "vented" or cut-out hoods on rangefinders, and it is usually to keep the viewfinder view from being blocked... but the Trip 35 isn't a rangefinder, so that would only explain one of the cutouts, not the second... They also don't seem to be in the right position for the viewfinder...


Reply

It really doesn't matter what position the hood is on the lens, the lower
right corner is still obscured, but much less so than the Series VI hood
I had on before. Smile These hoods also were for the 35RC, Pen EE, and
any other product that had the 43.5mm lens.


Reply

Very Happy I am glad it arrived safely,Awww doesn't it look good... I was thinking which one it was and then read your comment at the end...you read my mind Embarassed
There is always a reason I am finding in cameras and equipment why things have their little quirks etc...just keep using it and you will find the answer! Then you can tell us Laughing

Just a thought since a hood keeps direct light off of the lens maybe the position allows the less direct light onto the lens?


Reply

mo a écrit:
Just a thought since a hood keeps direct light off of the lens maybe the position allows the less direct light onto the lens?


Sounds reasonable to me, Moira, good point.


Reply

Katastrofo a écrit:
mo a écrit:
Just a thought since a hood keeps direct light off of the lens maybe the position allows the less direct light onto the lens?


Sounds reasonable to me, Moira, good point.


Whoa,,,

Those cutouts are what you need to have when those hoods are stored
backward on the lens which has focus tub just like ye olde Canonet's.

I will upload the photo tomorrow if I do not forget it. Very Happy


Reply

Cool ...


Reply

koji a écrit:
Katastrofo a écrit:
mo a écrit:
Just a thought since a hood keeps direct light off of the lens maybe the position allows the less direct light onto the lens?


Sounds reasonable to me, Moira, good point.


Whoa,,,

Those cutouts are what you need to have when those hoods are stored
backward on the lens which has focus tub just like ye olde Canonet's.

I will upload the photo tomorrow if I do not forget it. Very Happy


Thanks, Koji-san! I guess I won't apply to MIT for a scholarship. Laughing


Reply

Laughing Laughing Well if you won't apply Bill where does that leave me... Sad Embarassed See there is always a "sound" reason...not just a guessed.. Laughing


Reply

mo a écrit:
Laughing Laughing Well if you won't apply Bill where does that leave me... Sad Embarassed See there is always a "sound" reason...not just a guessed.. Laughing


Actually I did remember the hood could be reversed on the lens, just had
a dumkin moment is all. Wink


Reply

fish4570 a écrit:
Cool ...


Highly recommend this camera, Paul.


Reply

Here come photo (of hood with cutout):

in use>


stored (in reverse)>


BTW, the camera still works amazingly after 51~52 years. This Canonet is
my wife's, her farther bought when she was in grade 7 or 8. The camera
is a mint condition.

She used the camera to shoot this scene to test self-timer!!


Reply

If I remember correctly, the Trip original hood was the same one also used on the 35RC, and the cutouts are for the RC rangefinder window.


Reply

Thanks for the pictures, Koji-san, the Yashica GTN I had did the same thing
as well with its OEM hood.