| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
jazzokh1
Inscrit le: 25 Nov 2010 Messages: 2 Localisation: PK
|
 Posté: Jeu Nov 25, 2010 5:03 pm Sujet du message: Jupiter-9 2/85mm Disassembly |
|
 Posté: Jeu Nov 25, 2010 5:03 pm Sujet du message: Jupiter-9 2/85mm Disassembly |
|
|
jazzokh1 wrote:
Hi,
Has anyone tried to disassemble a Jupiter-9 85mm f/2 lens? Serial No. 8910610. Googled and found the disassembly procedure for an older Kiev lens but not for this one.
It doesn't have a mounting ring. The M42 mount is milled directly to the barrel.
Any help would be appreciated. At least tell me where to start. Ive tried twisting the front element ring, but i fear it may not be like the kiev jupiter9 and id end up breaking something.
Thanks in advance!   |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Jeu Nov 25, 2010 5:15 pm Sujet du message: Re: Jupiter-9 2/85mm Disassembly |
|
 Posté: Jeu Nov 25, 2010 5:15 pm Sujet du message: Re: Jupiter-9 2/85mm Disassembly |
|
|
Attila wrote:
| jazzokh1 a écrit: |
Hi,
Has anyone tried to disassemble a Jupiter-9 85mm f/2 lens? Serial No. 8910610. Googled and found the disassembly procedure for an older Kiev lens but not for this one.
It doesn't have a mounting ring. The M42 mount is milled directly to the barrel.
Any help would be appreciated. At least tell me where to start. Ive tried twisting the front element ring, but i fear it may not be like the kiev jupiter9 and id end up breaking something.
Thanks in advance!   |
|
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Jeu Nov 25, 2010 5:16 pm Sujet du message: |
|
 Posté: Jeu Nov 25, 2010 5:16 pm Sujet du message: |
|
|
Attila wrote:
You can start to disassembly from front also you can find small screw on barrel. |
|
| Haut de page |
|
 |
sichko
 Inscrit le: 20 Juin 2008 Messages: 2475 Localisation: South West UK
|
 Posté: Jeu Nov 25, 2010 5:45 pm Sujet du message: |
|
 Posté: Jeu Nov 25, 2010 5:45 pm Sujet du message: |
|
|
sichko wrote:
I've cleaned one exactly like this. I didn't remove any glass but simply cleaned the moving parts.
The optical block, complete with aperture ring and stop down ring, unscrews as a block from the base/mount/focusing unit. The aperture ring and stop down ring can then be removed from the optical block and cleaned.
The focus ring is held on by 3 screws. You can see one of them near the 1,7 on the distance scale. This reveals the focusing helicoid. I didn't dismantle this part but cleaned it and regreased it while assembled. _________________ John |
|
| Haut de page |
|
 |
jazzokh1
Inscrit le: 25 Nov 2010 Messages: 2 Localisation: PK
|
 Posté: Sam Nov 27, 2010 1:55 pm Sujet du message: What is the next step? |
|
 Posté: Sam Nov 27, 2010 1:55 pm Sujet du message: What is the next step? |
|
|
jazzokh1 wrote:
@ sichko. got the focusing ring off and twisted the rign to which it was attached. I can now see the helicoid full of axle grease.
If i remove the three screws from the aperture ring. would it release optical block from the helicoid? |
|
| Haut de page |
|
 |
sichko
 Inscrit le: 20 Juin 2008 Messages: 2475 Localisation: South West UK
|
 Posté: Sam Nov 27, 2010 5:45 pm Sujet du message: |
|
 Posté: Sam Nov 27, 2010 5:45 pm Sujet du message: |
|
|
sichko wrote:
The optical block simply unscrews from the focussing assembly. You don't need to remove the screws on the aperture ring - unless your lens is completely different to mine. The optical block will come away with both aperture ring and stop down ring. If you want to remove them for cleaning/regreasing then it's fairly intuitive. But if you need any further advice let me know. When you do remove the optical block - be careful. There may be one or more spacer rings which might be quite thin and easily bent. _________________ John |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|