| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Ven Nov 09, 2007 10:48 am Sujet du message: 120 slide mounting |
|
 Posté: Ven Nov 09, 2007 10:48 am Sujet du message: 120 slide mounting |
|
|
peterqd wrote:
I've now received the first roll of Velvia 50 x 120 back from the lab, nicely cut into strips and slotted into a clear plastic pockets, not mounted. I can't do any decent scans yet or project them as they're not mounted. Looking at the film with a magnifying glass the shots look nice and sharp, but about half seem to be about 1 -2 stops underexposed. This roll was a test of the camera's shutter speeds and meter, so I was half-expecting this sort of result. I'll be making a separate post about meters shortly.
The question I wanted to ask now is about slide mounting. I can't find a lab that will mount the 120 slides - they all seem to do 35mm slide-mounting but processing-only of 120 film. I found where I can buy 120 slide mounts to do it myself, but is this normal or does anyone know a lab (pref in UK) who will mount 120 slides? |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Ven Nov 09, 2007 10:52 am Sujet du message: |
|
 Posté: Ven Nov 09, 2007 10:52 am Sujet du message: |
|
|
Orio wrote:
If they look underexposed at your magnifying glass, they will look perfect in projection.
- _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Sam Nov 10, 2007 4:41 pm Sujet du message: Re: 120 slide mounting |
|
 Posté: Sam Nov 10, 2007 4:41 pm Sujet du message: Re: 120 slide mounting |
|
|
peterqd wrote:
| peterqd a écrit: |
| does anyone know a lab (pref in UK) who will mount 120 slides? |
no? |
|
| Haut de page |
|
 |
bob955i
 Inscrit le: 15 Avr 2007 Messages: 2495
|
 Posté: Sam Nov 10, 2007 6:08 pm Sujet du message: |
|
 Posté: Sam Nov 10, 2007 6:08 pm Sujet du message: |
|
|
bob955i wrote:
DIY Peter?
http://www.photomart.co.uk/ProductDetail.asp?ProductCatalogue=8677SLID&CatID=6
Orio's correct too about your slides looking underexposed - once you project them, they'll look great. I regularly underexposed my slide film by around 1/2 to 3/4 stop for more punch. |
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Dim Nov 11, 2007 8:50 am Sujet du message: |
|
 Posté: Dim Nov 11, 2007 8:50 am Sujet du message: |
|
|
peterqd wrote:
Thanks Bob. It looks like DIY then. Thanks for the link, they're a little cheaper than the one I found.  |
|
| Haut de page |
|
 |
Laurence
 Inscrit le: 26 Mar 2007 Messages: 4809 Localisation: Western Washington State
Expire: 2016-06-19
|
 Posté: Dim Nov 11, 2007 6:32 pm Sujet du message: |
|
 Posté: Dim Nov 11, 2007 6:32 pm Sujet du message: |
|
|
Laurence wrote:
Hello Peter: First off, congratulations of getting the slides all processed and ready to mount!
I've been using a 120 slide projector and mounting my own for quite a long time. I've tried all the mounts (glass, double-glass, cardboard) and found that the plastic is the easiest and best-performing.
I keep a limited number on hand (somewhere around 75 or so), and then just exchange with new images when I'm done looking at the current "crop" of images. It's easy enough that I don't really worry about the time it takes to swap them out.
You don't really need the glass to "flatten" the transparency. There can certainly be a period of "buckling" when the slide first contacts the high heat in the projector, but I simply warm them up first and that helps tremendously. Maybe they STILL buckle a little, I don't know, but for my eyes and viewing they are marvelous just the way they are.
I agree on the underexposed slides being just fine for projecting.
Peter, what projector are you using?
Also, if you ever get a chance try some black and white transparencies from dr5. Wow!
Larry _________________
Assent, and you are sane;
Demur,—you ’re straightway dangerous,
And handled with a chain.
Emily Dickinson
Cameras and Lenses in Use:
Yashica Mat 124 w/ Yashinon 80/3.5,
CV Apo-Lanthar 90/3.5SL, (Thank you Klaus),
Pentax 645,
Flek 50,
Pentax-A 150
Pentax-A 120 Macro
Voigtlander Vitomatic I w/Color Skopar 50/2.8
Konica TC and zoom lenses (thanks Carsten)
Contax AX
Yashica ML 50/2
Yashica ML 35/2.8
Carl Zeiss Contax 50/1.4
Tamron Adaptall SP 17/3.5
Tamron Adaptall 28/2.5
Tamron Adaptall SP 300/2.8 LD (IF)
|
|
| Haut de page |
|
 |
peterqd
 Inscrit le: 28 Fév 2007 Messages: 7449 Localisation: near High Wycombe, UK
Expire: 2014-01-04
|
 Posté: Lun Nov 12, 2007 7:07 pm Sujet du message: |
|
 Posté: Lun Nov 12, 2007 7:07 pm Sujet du message: |
|
|
peterqd wrote:
| Laurence a écrit: |
Hello Peter: First off, congratulations of getting the slides all processed and ready to mount!
I've been using a 120 slide projector and mounting my own for quite a long time. I've tried all the mounts (glass, double-glass, cardboard) and found that the plastic is the easiest and best-performing.
I keep a limited number on hand (somewhere around 75 or so), and then just exchange with new images when I'm done looking at the current "crop" of images. It's easy enough that I don't really worry about the time it takes to swap them out.
You don't really need the glass to "flatten" the transparency. There can certainly be a period of "buckling" when the slide first contacts the high heat in the projector, but I simply warm them up first and that helps tremendously. Maybe they STILL buckle a little, I don't know, but for my eyes and viewing they are marvelous just the way they are.
I agree on the underexposed slides being just fine for projecting.
Peter, what projector are you using?
Also, if you ever get a chance try some black and white transparencies from dr5. Wow!
Larry |
Thanks Laurence, and thank you for the tips too. (My middle name is Laurence, by the way, it was my father's name. Everyone called him Laurie, not Larry).
I don't have a MF projector yet but I do intend buying one, after I've bought the scanner that is! I've been watching a few on Ebay. What make would you recommend? The ones I've seen are Aldis and Gnome, both single loading and quite old, probably 1950's I would think. Is there a more modern make? - I'd prefer not to be stuck with an extinct type of lamp.
Thanks |
|
| Haut de page |
|
 |
Laurence
 Inscrit le: 26 Mar 2007 Messages: 4809 Localisation: Western Washington State
Expire: 2016-06-19
|
 Posté: Mar Nov 13, 2007 3:13 am Sujet du message: |
|
 Posté: Mar Nov 13, 2007 3:13 am Sujet du message: |
|
|
Laurence wrote:
I went with the Bausch and Lomb Balomatic 755. This was after considerable research and also I was able to get "first hand" opinions from two owners.
I will post, tomorrow, an image of the projector, as well as the description of the projector, in my user's manual to give you a better idea of the configuration.
I purchased mine for $75 three years ago. Lamps are readily available. _________________
Assent, and you are sane;
Demur,—you ’re straightway dangerous,
And handled with a chain.
Emily Dickinson
Cameras and Lenses in Use:
Yashica Mat 124 w/ Yashinon 80/3.5,
CV Apo-Lanthar 90/3.5SL, (Thank you Klaus),
Pentax 645,
Flek 50,
Pentax-A 150
Pentax-A 120 Macro
Voigtlander Vitomatic I w/Color Skopar 50/2.8
Konica TC and zoom lenses (thanks Carsten)
Contax AX
Yashica ML 50/2
Yashica ML 35/2.8
Carl Zeiss Contax 50/1.4
Tamron Adaptall SP 17/3.5
Tamron Adaptall 28/2.5
Tamron Adaptall SP 300/2.8 LD (IF)
|
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|