| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Lun Sep 20, 2010 12:10 am Sujet du message: Unknown (Beier?) 9x12 German plate camera |
|
 Posté: Lun Sep 20, 2010 12:10 am Sujet du message: Unknown (Beier?) 9x12 German plate camera |
|
|
luisalegria wrote:
From ebay, of course, a rather unusual 1920's camera.
Wearing all the "combat gear" -
On the face of it, this is a very standard mid-to-high end 9x12 plate camera from the later 1920's, with a high-end dial-set shutter, double extension bellows, a fine double-anastigmat lens and a standard rail back that can take the usual groundglass, Zeiss-style plate holders, film packs, and roll backs. You can line up a collection of these from a couple of dozen makers, and they will look precisely alike from 3 feet away.
Whats unusual about it ?
1. It has no brand. Manufacturers usually marked these with embossed names and logos on the leather cover, on the front, the groundglass cover, or the handle. It is possibly a Beier, specifically a variant of the Beier Lotte, because of the Freital connection and similar design details, as pointed out by member Kathmandu (thanks!).
2. The shutter is a "Rulex", maker unknown and unmarked, so far as I can see. It is very similar to a dial-set Compur of the time, but it isn't; the controls are similar but in the wrong place, work in the wrong directions, etc. And the mechanism, as far as I can tell, is quite different. It does perform quite like a Compur though, with 1s-1/300 speed, this has a somewhat higher top speed than the Compurs of the time. And this one works very well indeed. Who made the "Rulex"? I certainly don't know. I suspect the maker may have been violating some of the Deckel patents.
3. The lens is an Erkos Selar, which I gather was either a small maker in Freital or a brand used for marketing some better-known makers lenses. Some Beiers used Erkos lenses, making the connection more likely. The lens is a doppel-anastigmat indeed, four elements in four groups much like a Rodenstock Eurynar or Goerz Dogmar, perhaps more like the Eurynar. I had it apart and compared it to my Eurynar and Dogmar; it seems more like the Eurynar.
4. This thing has a built-in lightmeter. Yes, there were cameras with these before the 1950's ! On the side of the case is embedded a Practos extinction meter integrated with the back sight of the sports finder.
Practos was a German maker of extinction lightmeters. Extinction meters work by viewing light through a calibrated glass; your reading was the last number visible through the glass. These things take some getting used to; the readings tend to be something of a judgement call. I tried to make this one work for me, but in the end I fell back on my old Sekonic.
So how does this one work ? I would say very well. Its in excellent condition as to mechanics and the bellows are in great shape. The shutter is perfect and the lens seems sharp enough, though I am in no position to compare it scientifically against Zeiss, Schneider or Rodenstock. As far as I can tell, for my purposes its no worse than these. This lens theoretically should permit removing the front cell and using just the rear cell as a longer focal length; and indeed that does work, and the bellows has more than enough extension for this trick. I have seen some of these plate cameras, with the proper lens, that have two focus scales for this reason.
I only did landscapes; I should try some portraits, etc. someday.
On Ocean Beach - Rollex 120 back, Arista Edu 100, yellow and red/orange filters. I had some streaking problems, which I think came from development. Gassers let me down a bit on these rolls I think.
 _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Lun Sep 20, 2010 2:37 am Sujet du message: |
|
 Posté: Lun Sep 20, 2010 2:37 am Sujet du message: |
|
|
Farside wrote:
Nice score.
I came across Rulex last year - iirc, they were/are quite worth having, if you find one. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
k.hendrik
Inscrit le: 29 Oct 2010 Messages: 6 Localisation: the netherlands
|
 Posté: Ven Oct 29, 2010 3:45 pm Sujet du message: Unknown (Beier?) 9x12 German plate camera |
|
 Posté: Ven Oct 29, 2010 3:45 pm Sujet du message: Unknown (Beier?) 9x12 German plate camera |
|
|
k.hendrik wrote:
I bought this yesterday including 3 glass holders but no film inserts !
I would love to make pictures with this beautifull old lady. In your post I read that there are different types of backs. You use a "rollex 120 back" ?
Is there a market for those backs ? & how do you search?
thanks.
flickr.com/photos/77846450@N00/5123593548/
flickr.com/photos/77846450@N00/5123741657/
apug.org/forums/forum44/83274-erko-9x12cm-folding-camera |
|
| Haut de page |
|
 |
Sevo
 Inscrit le: 22 Août 2008 Messages: 1189 Localisation: Frankfurt, Germany
Expire: 2012-12-03
|
 Posté: Ven Oct 29, 2010 5:37 pm Sujet du message: |
|
 Posté: Ven Oct 29, 2010 5:37 pm Sujet du message: |
|
|
Sevo wrote:
Rollex (later a brand name used for Linhof integrated film backs) and Rada made almost all roll film backs for German style "falz" backs.
http://foto.shop.ebay.de/i.html?_nkw=rollex+-linhof&_sacat=625&_odkw=rollex&_osacat=625
http://foto.shop.ebay.de/i.html?_nkw=rada&_sacat=625&_odkw=rollex+-linhof&_osacat=625 _________________ Sevo |
|
| Haut de page |
|
 |
k.hendrik
Inscrit le: 29 Oct 2010 Messages: 6 Localisation: the netherlands
|
 Posté: Ven Oct 29, 2010 7:58 pm Sujet du message: |
|
 Posté: Ven Oct 29, 2010 7:58 pm Sujet du message: |
|
|
k.hendrik wrote:
thanks !
what about film inserts for the size 9x12 or is this 4x5 inch ? & I have to clip this to the right size ? |
|
| Haut de page |
|
 |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Ven Oct 29, 2010 8:49 pm Sujet du message: |
|
 Posté: Ven Oct 29, 2010 8:49 pm Sujet du message: |
|
|
luisalegria wrote:
Yours looks the same as mine, just a different lens and shutter.
Yours is also a 9x12
You should look for a roll film back for 9x12. Sevo is right, the usual brands in Europe were Rollex and Rada. These were made in 6x9 and 9x12 size - the same film, its just the plate was bigger to fit on 9x12 backs. I even saw one for 10x15 !
6x9 was more common. If you are good with tools you can adapt a 6x9 back to 9x12, but you will also need to make a new groundglass back. Better to just find one for 9x12.
The glass plate holders can be used also for 9x12 film. First put in a piece of cardboard, or maybe better cut a piece of 1.5mm plexiglass to fit. Then put the film on top of that.
You can find 9x12 film holders quite easily but in the US these can be a bit expensive. They are probably much cheaper in Europe. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
k.hendrik
Inscrit le: 29 Oct 2010 Messages: 6 Localisation: the netherlands
|
 Posté: Ven Oct 29, 2010 9:04 pm Sujet du message: |
|
 Posté: Ven Oct 29, 2010 9:04 pm Sujet du message: |
|
|
k.hendrik wrote:
thanks; I start digging in & show you the results. |
|
| Haut de page |
|
 |
k.hendrik
Inscrit le: 29 Oct 2010 Messages: 6 Localisation: the netherlands
|
 Posté: Dim Déc 12, 2010 9:48 pm Sujet du message: |
|
 Posté: Dim Déc 12, 2010 9:48 pm Sujet du message: |
|
|
k.hendrik wrote:
http://www.flickr.com/photos/77846450@N00/5229115181/
My first ! with Combiplan in HC110 / 6'/ 20C/ 3 s. agitation per 1/2 '.
I've got myself now 10 plates including sheetholders. There are a lot different types of holders; same size but just missing a little 'lip'.
Do I love this slow-looking
greetings
k.hendrik _________________ film, Lubitel 2,Zeiss Ikon-Box Tengor 6x9, Nikon fm, Carl Zeiss Planar 1.4/50 ZF,Kodak Hawk-eye six-20 model C, Contax g2, Mamiya RZ pro II, ERKO 9x12 |
|
| Haut de page |
|
 |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Lun Déc 13, 2010 11:58 pm Sujet du message: |
|
 Posté: Lun Déc 13, 2010 11:58 pm Sujet du message: |
|
|
luisalegria wrote:
Good show !
What do you use to scan 9x12 ? _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
k.hendrik
Inscrit le: 29 Oct 2010 Messages: 6 Localisation: the netherlands
|
 Posté: Mer Déc 15, 2010 4:21 pm Sujet du message: how to scan 9x12cm |
|
 Posté: Mer Déc 15, 2010 4:21 pm Sujet du message: how to scan 9x12cm |
|
|
k.hendrik wrote:
Thanks. That's the next problem to solve; now I use a Canoscan 8800f for 6x6 negs. but I don't know if there are scanners for larger films ! _________________ film, Lubitel 2,Zeiss Ikon-Box Tengor 6x9, Nikon fm, Carl Zeiss Planar 1.4/50 ZF,Kodak Hawk-eye six-20 model C, Contax g2, Mamiya RZ pro II, ERKO 9x12 |
|
| Haut de page |
|
 |
luisalegria
 Inscrit le: 07 Mar 2008 Messages: 6602 Localisation: San Francisco, USA
Expire: 2018-01-18
|
 Posté: Mer Déc 15, 2010 8:36 pm Sujet du message: |
|
 Posté: Mer Déc 15, 2010 8:36 pm Sujet du message: |
|
|
luisalegria wrote:
There are scanners for larger films, but new ones seem rather expensive to me.
Most people seem to be recommending the Epson V700 or V750
Those take 4x5 so it should work for 9x12 _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Haut de page |
|
 |
Banjo
 Inscrit le: 25 Juin 2009 Messages: 75 Localisation: Oz (Near Adelaide)
|
 Posté: Mer Déc 15, 2010 11:26 pm Sujet du message: Re: Unknown (Beier?) 9x12 German plate camera |
|
 Posté: Mer Déc 15, 2010 11:26 pm Sujet du message: Re: Unknown (Beier?) 9x12 German plate camera |
|
|
Banjo wrote:
| luisalegria a écrit: |
| From ebay, of course, a rather unusual 1920's camera. ... |
Very nice, very informative. Thanks for posting!  |
|
| Haut de page |
|
 |
Farside
 Inscrit le: 01 Sep 2007 Messages: 6579 Localisation: Ireland
Expire: 2013-12-27
|
 Posté: Jeu Déc 16, 2010 12:14 am Sujet du message: Re: how to scan 9x12cm |
|
 Posté: Jeu Déc 16, 2010 12:14 am Sujet du message: Re: how to scan 9x12cm |
|
|
Farside wrote:
| k.hendrik a écrit: |
| Thanks. That's the next problem to solve; now I use a Canoscan 8800f for 6x6 negs. but I don't know if there are scanners for larger films ! |
To scan 4x5/9x12 cheaply, pick up a used Epson 2450 for twenty bucks. _________________ Dave - Moderator
Camera Fiend and Biograph Operator
If I wanted soot and whitewash I'd be a chimney sweep and house painter.
The Lenses of Farside (click)
BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic -
http://forum.mflenses.com/foma-campaign-t55443.html
FOMAPAN on forum -
http://www.mflenses.com/fs.php?sw=Fomapan
Webshop Norway
http://www.fomafoto.com/
Webshop Czech
https://fomaobchod.cz/inshop/scripts/shop.aspx?action=DoChangeLanguage&LangID=4 |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|