| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Nordentro
 Inscrit le: 24 Juin 2010 Messages: 4738 Localisation: Lillehammer, Norway
Expire: 2015-01-29
|
 Posté: Jeu Déc 30, 2010 3:50 pm Sujet du message: Share your digital darkroom white balance trick |
|
 Posté: Jeu Déc 30, 2010 3:50 pm Sujet du message: Share your digital darkroom white balance trick |
|
|
Nordentro wrote:
Every photographer has experience with white balance that is a bit off on some pictures. Skin tones are to red, picture have a green or blue cast from a difficult light source and more...
What is your best digital darkroom trick to adjust the white balance?  _________________ Lars | Manuellfokus.no |
|
| Haut de page |
|
 |
cooltouch
 Inscrit le: 15 Jan 2009 Messages: 9096 Localisation: Houston, Texas
|
 Posté: Jeu Déc 30, 2010 4:41 pm Sujet du message: |
|
 Posté: Jeu Déc 30, 2010 4:41 pm Sujet du message: |
|
|
cooltouch wrote:
What I usually try first is using the simplest white balance adjustments in the photo editing sortware I'm using. I have an Epson scanner and I find that the Epson Scan software often does a great job of color correction when I click on that option. So if I'm scanning an image from film, and it looks like the colors are off, this is the first option I'll try.
If it is a digital image where the wb is off, there are several option in Photoshop, as I recall, that allow for adjustment. I don't use PS as much as I use Paint Shop Pro. PSP is similar in that there are several different menu selections that allow for the control of color. Typically they all boil down to using a pencil or pen or eyedropper shaped icon where you will select an area that is supposed to be white, or 18% gray, or black. Sometimes, I need to select only one of these levels to get the correct color, sometimes I'll have to select all three. If it's being difficult, which is not very often, I may have to try several different combinations before I get a good color balance. PSP also has a manual color control, where you adjust the cyan-red, magenta-green, yellow-blue, but I seldom use it. Chances are very likely that Photoshop has these same features.
In practice, I will usually look for an area in the photo that is 18% gray. If I can find one, I'll click the icon on that spot, and that usually takes care of things. If there are no good 18% gray areas, then I'll look for one that should be white, and click on it. This often works as long as the white isn't totally bown out (255, 255, 255). Same with black, as long as it isn't totally blocked up (0, 0, 0). If the photo is all mostly midtones with no whites, grays, or blacks, that is when I just start clicking on multiple areas to see if I can get it set right. If not, I'll then resort to the manual color control. _________________ Michael
My Gear List: http://michaelmcbroom.com/photo/gear.html
My Gallery: http://michaelmcbroom.com/gallery3/index.php/
My Flickr Page: https://www.flickr.com/photos/11308754@N08/albums
My Music: https://soundcloud.com/michaelmcbroom/albums
My Blog: http://michaelmcbroom.com/blogistan/ |
|
| Haut de page |
|
 |
martinsmith99
 Inscrit le: 31 Août 2008 Messages: 7029 Localisation: S Glos, UK
Expire: 2013-11-18
|
 Posté: Jeu Déc 30, 2010 5:00 pm Sujet du message: |
|
 Posté: Jeu Déc 30, 2010 5:00 pm Sujet du message: |
|
|
martinsmith99 wrote:
I use Bridge and just eyeball it. Not exactly scientific but I haven't had any complaints yet. _________________ Casual attendance these days |
|
| Haut de page |
|
 |
std
 Inscrit le: 09 Fév 2010 Messages: 1826 Localisation: Bulgaria
|
 Posté: Jeu Déc 30, 2010 7:23 pm Sujet du message: |
|
 Posté: Jeu Déc 30, 2010 7:23 pm Sujet du message: |
|
|
std wrote:
White ballance on what?
film scans or for developing raw files? |
|
| Haut de page |
|
 |
Nordentro
 Inscrit le: 24 Juin 2010 Messages: 4738 Localisation: Lillehammer, Norway
Expire: 2015-01-29
|
 Posté: Jeu Déc 30, 2010 9:18 pm Sujet du message: |
|
 Posté: Jeu Déc 30, 2010 9:18 pm Sujet du message: |
|
|
Nordentro wrote:
| std a écrit: |
White ballance on what?
film scans or for developing raw files? |
Any digital file or workflow
Share your experience
---------------------------------
Well, here is mine.
I like to adjust white balance in photoshop with the curves tool (ctrl +m).
I find a spot in the picture that I know is white (a sink, white paper, white plastic things etc) and measure all the rgb channels at the same spot with the eyedropper.
I mouse click to measure and use ctrl + 3, ctrl + 4 & ctrl +5 for changing between red, green and blue. (I mouse click all channels)
Then I usually take the highest input value of the three and adapt it to the two other channels in the output value, volla!
The three output values are now the same and the picture should be balanced! _________________ Lars | Manuellfokus.no |
|
| Haut de page |
|
 |
hexi
 Inscrit le: 01 Juil 2009 Messages: 1631 Localisation: France
Expire: 2011-11-18
|
 Posté: Jeu Déc 30, 2010 10:00 pm Sujet du message: |
|
 Posté: Jeu Déc 30, 2010 10:00 pm Sujet du message: |
|
|
hexi wrote:
I tried auto wb, it sux. So i take a pic of a white carton board, and made it my manual set wb. The color temp given is 5600K, it's pretty accurate, at least i prefer to auto wb
i HATE wb stuff by the way  _________________ Happy owner and user of :
SLR's > Contax Aria - RX
DSLR > Canon 5D
Lenses : C/Y Planar 1.4/50 - Distagon 2.8/35 - Planar 1.4/85
http://www.flickr.com/photos/sonnar85 |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|