MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Got 40D, now which focusing screen?
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi guys!

After long time considering everything els than Canon, I finally changed my D200 for a 40D, to get to know Carl Zeiss, Zuiko and their fellows! Wink

Now, as I come from Nikon, I'm used to this very nice little focuseindicator and need an alternativ to it! The adapter for my Nikon glas is due today and should arrive in the next few hours! I haven't taken a shot yet with my new 40D but read alot in the last two days about focusing with manual glas.

As I see it, there are three option:

1. Get an adapter with contacts, which I didn't because I never liked the blinking focusing point as confirmation on my Samsung GX20.

2. Get a splitscreen focusing screen. Benefit would be acurate focusing with manual glas. Downside is the pain of an f5.6 max aperture for most AF Telezooms. I had one in my GX20 and it was always to dark with my 300mm stopped down to f5.6 or my kitzooms at the long end. At least in not perfectly bright lighting that was.

3. Get an Ef-s full matte screen from canon. I heard good things about it when using lenses of f2.8 and faster but there seems to be no benefit in using it with lenses of f5.6 and slower. As I will shoot a lot of tele and my 300mm is sharpest at f5.6-8, I'm a little worried right now, if this screen will really benefit me!

What do you think?

As I want to get multiple different adapter, I think the first option is none, as it is t expansive compared to one screen and many adapters without contacts!

I would get a Ef-s for 35€ and a split screen for 25€. So maybe I just try it anyway!

But please give me some insight!


Reply

Use the Canon matte screen if you want to use spot metering. It's also more accurate in other metering modes. Get a split screen if you don't mind it being a little out.

AF confirm adapter is also useful. Use the green light bottom right to be sure of accurate focus and not the red focus indicator though (as I did for a long time).