MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Batch Scanning on Epson Scanners? (V500, V600, V700, V750)
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I'm considering picking up an Epson scanner for scanning 35mm negatives and slides, and I was wondering if anyone can provide any personal experiences as to how well these scanners work for batch scanning? I have hundreds of rolls of film and several boxes of slides from my parents which I would like to scan, so speed and ease-of-use for semi-unattended scanning would probably take priority over ultimate quality in this case. Wink


Basically, the questions I have:

* Once you have it configured, can you just load up the negative or slide carriers, hit a button, and then go do other things and come back when it is done? Or does it require more tweaking than that?

* How often does the scanner software make mistakes? (not detecting a frame, cropping to the wrong area or wrong orientation for slides, etc?) Basically, how often would I have to manually intervene or re-scan a set after doing a full-auto batch scan?

* Are the carriers pretty easy to load, and would it be worthwhile to purchase a second carrier to allow for loading one while the other is scanning?

* How long does it take to scan a full tray (two strips of 6-exposure negatives for the V500/V600, or four strips for the V700/V750? Let's say at 2400 dpi, or some other moderate resolution (better than "for web" in case a small print needs to be made, but not the full high quality).

* Can the Epsons do a quick low-resolution "contact sheet" scan?

* How much does it slow things down to enable the hardware dust/scratch removal?


Thanks for the help. Cool


Reply

Well I know about the V750 and it is easy to use..just put your strips of negs in the holders, select resolution and where to store the Jpg files on your hard drive, and while scanning, browse MFlenses forum Wink and after scanning, windows computer will pop up with all your scanned images.

Picture of 35mm neg holders on V750..I was scanning some APS film (AFAIK Epson don't make a holder for this size).


Reply

I have V500 and can share some info for it.

With the Epson Software there is an auto mode and yes , you just need to put the holders and press one button.

If you need to tweak every image individually (after index preview) then it takes some time but this you do before the real scan so when you are done with the tweaking just start it and leave it for 20 minutes.

For 35 mm the frames are generally detected properly. for larger negatives i's say it won't work so good. Orientation is correct as long as you put the film correctly to the holder. Anyway just after index preview you can rotate or flip the images one by one and when you are ready start the scan of all frames.

The original holders are OK if the film if flat, don't know if you will need a second one in order to load faster but maybe you can buy some more advanced third party holders (or glass inserts) in order to keep the film flat if it is curled - This will improve the sharpness.

The scanning speed is slow (at least on my v500) and depends from the resolution and if you are using the digital ice.
I'd say about 3 minutes per 35mm frame on 6400dpi (image size 5482x8789) with digital ice. If you put everything on you can go to 30 minutes for the 2 holders with 6 frames each.

The Digital ice takes twice longer as it scans one more time with infrared and then masks the differences.

If you are interested in exact times i can make a test tonight.

PS here are the times:

- Preview 30 sec

And some speed tests with the following settings:
2400dpi, 3544 x 2511 Pixels (8.90 MPixels), 48 bit Color, 1x35 neg, save to jpeg.

- USM-Medium, Digital Ice:quality - 4 min
- USM-Medium, Digital Ice - Speed 3min 30 sec.
- No USM, Digital Ice - Speed 3 min 25 sec
- No USM, no ICE - 1min 10 sec.


Reply

To echo what others have indicated, processing time when using ICE, etc., is going to vary immensely based on how powerful of a computer you are using, so it is hard to give a general time estimate.

I would do some testing before I used multi-pass scanning because many scanners do not return to the exact same starting point and thus you get passes that are not aligned which can affect sharpness.

Autocropping is often fooled. For many of us, it seems to be faster in the end to just set up a manual batch scan and know that you got the full frame the first time versus going back to do comparisons of each scan to find which ones will need the inevitable rescan.

I put up some tips here if you are not sure how to create a batch scan in EpsonScan:

http://www.betterscanning.com/scanning/batchscanning.html

Doug


Reply

Hey Doug! Nice to see you here!


Reply

I own a V500 and can not comment on the batch scanning, but the real resolution of the scanner is way lower than 6400. I tested sortly after purchasing it, and if I remember correctly, the optical resolution was about 1800 dpi

I usually scan 35 mm at 3200 and medium format at 2400. But if time is your prime concern I would scan 35 at 2400 or even at 2000. The detail would be virtually the same at 2000 vs. 3200.

Javier


Reply

Thanks everyone for the great replies, and especially the detailed speed tests!


It looks like Digital ICE is the major factor in the scanning speed... potentially tripling the amount of time required. Shocked

So beyond the time for the second scan in IR, does the Digital ICE really use a lot of resources on the computer then? Is there a dramatic difference in CPU & memory utilization between the scans with ICE, and without? I have one computer here which is pretty fast, but I couldn't dedicate it to scanning. I had planned on using this scanner with an older PowerPC Mac Mini from time to time as well... I wonder if the Mac would be adequate for scans without the Digital ICE enabled?


It sounds like ~2000-2400 dpi would be a good sweet spot then. Faster scans, and closer to the true optical resolution of the scanner. I'll go with that.


Doug- Welcome to the forums, and thanks for all of the great information on your site! I am particularly interested by the ability to pre-define the frames in VueScan, and then batch scan without the need for a preview scan. In your experience, is this a better method than using the auto-detection in the Epson software?

Also, when using your ANR glass inserts, the instructions say that the film and glass insert can't go all the way to the clips, and a space must be left at the end. Does this shortened film area still allow for enough space to scan a full strip of 6 frames?


Reply

Sorry for the late reply but I don't get by here that often. I have actually been a long-time visitor using another sign-on but lost the information and had to sign up again.

>It sounds like ~2000-2400 dpi would be a good sweet spot then. Faster scans, and closer to the true optical resolution of the scanner. I'll go with that.

Personally, I would go with 3200 because if your scanner is set up right it is possible that it can exceed 2400.

>In your experience, is this a better method than using the auto-detection in the Epson software? <

I don't trust it. Too many times, it will mis-crop. In the end, it is just faster to set up a manual scan and know that you got it right the first time. That is just my opinion.

>Also, when using your ANR glass inserts, the instructions say that the film and glass insert can't go all the way to the clips, and a space must be left at the end.<

Correct. You would have to scan 5 frames and then flip the film for the sixth. I do sell a longer piece for people who are willing to snap off those pretty useless tabs.

Thanks,
Doug


Reply

Hey Scheimpflug,

I thought I recognized this thread and was surprised not to find my answer to your questions, then realized it was in another forum Cool Hey, why not get a variety of answers?

For the past three or four days, and since my reply over at DPUG.org, I've been doing a lot of scanning of some old 35mm negatives I found in a file box. I started out scanning them the way I have all along, which was to manually do the positioning and cropping of each image's scan areas. And then I recalled a thread on another forum where a guy was commenting about using his Epson and Epson Scan's "thumbnail" option, and that it worked well. Well, I had never used it, so because of the large pile of old negatives I was faced with, I decided to give it a try. And much to my surprise, it has worked perfectly. A big plus to using thumbnails is you can rotate or flip your image before scanning -- an option not available when doing it manually.

For me, and most of these negatives, I haven't been able to just load the negatives and scan them. I still will check each one for proper exposure, and frequently find that they will need some adjustment. Especially photos where flash has been used or if there is a bright background. The scanned image tends to be washed out, but usually there is still a lot of detail in the negative. In these situations, one is better off scanning a negative where it may be somewhat dark but containing a good amount of information than to scan one that has a washed out look, because the scanner will lose a lot of information during the scan if the washed out look isn't corrected. The brightness of the image can be adjusted in PP, but it is not possible to gain back lost information in PP. So, I always check for this, as well as correct color. I can usually achieve a better exposure and correct color just by using the histogram and the white and gray eyedropper buttons to adjust things.

So, yes, it isn't just a push-this-button-and-walk-away sort of thing. But once the adjustments have been made, then it is. And while the scanner is doing its job, I can hang out in the forums or watch TV or eat dinner or whatever. Which are things I've been doing for the past few days while scanning. In fact, right now as I type this, my scanner is running in the background, scanning negatives.

One more comment, and this is something I picked up from a thread over at photo.net. Here's the thread:

http://photo.net/film-and-processing-forum/00YRIk

My comment can be found on the second page of the above thread. Since reading this thread I have been scanning my negs at 4800 ppi, something I've never done with my 4990, other than just a few tests, until just a few days ago. File sizes are huge -- 150MB or so -- but what I plan to do is reduce them to either a 3200 or 2400 ppi equivalent scan. The additional detail is preserved even after downsizing the scan.

Whatever scanner you decide to purchase, you might want to do the same with yours, and see if you don't get better images when scanned at higher resolutions. In my case, the differences have been subtle, but noticeable, and that's enough for me to go with the higher scan resolution.