| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Avr 01, 2007 10:29 pm Sujet du message: [TIPS] Processing sharpening after noise reduction |
|
 Posté: Dim Avr 01, 2007 10:29 pm Sujet du message: [TIPS] Processing sharpening after noise reduction |
|
|
Orio wrote:
I think many of you have experienced this problem with digital cameras: you take a high ISO picture, and want to reduce the noise, because alas, even if the technology has made progresses, the digital noise still looks worse than the film noise.
So you apply the noise reduction as first thing, like it must be done. Then you want to do the sharpening, because all Beyer sensor images need sharpening. But there comes the problem, because when you do sharpen a picture that has been de-noized, you notice those strange artifacts especially on the flat color areas.
The problem is not of easy solution. Yes one could mask out the flat looking areas, but this is not a practical solution.
I think I have found a way to reduce the problem.
First you apply the de-noise, taking take to disable possible sharpening passes that your denoizer may include (Noise Ninja does for instance, this is the program I use).
Then you open the photoshop filter "smart sharpen" (I think it's called this way but I'm not sure, I have Italian Photoshop) and apply a sharpen value to a very small range, usually below 0,5. This will leave most of flat color areas alone and sharpen the edges and higher contrast areas only - those areas where you must notice the sharpness of an image. Apply a SMALL value!!! This is not the final sharpening, unless you plan to print the image full size. If instead you plan to publish to the internet, resize the image now using a plain bicubic method (NOT bicubic sharpen) or even better Genuine Fractals if you have it.
Finally, you apply a light pass of Photoshop's "Unsharp Mask" or of the sharpening plugin you use. Apply lightly, because you already did presharpen with the "smart sharpen" filter!
I find this combination to work well for me to "save" pictures of 400 ISO or higher and give them a little sharpening as well.
This is a picture I took this evening of a flowering Yucca in the city park. I think it is Yucca elephantipes but I am not 100% sure. Anyway, I applied the above processing to it and I am happy with the result:
direct link:
http://img352.imageshack.us/img352/4690/yuccareddz2.jpg _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Avr 01, 2007 10:35 pm Sujet du message: |
|
 Posté: Dim Avr 01, 2007 10:35 pm Sujet du message: |
|
|
Orio wrote:
Oh I was forgetting the specs!
400 ISO EOS 5D Zeiss Planar 1.4/50mm _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Dim Avr 01, 2007 10:41 pm Sujet du message: |
|
 Posté: Dim Avr 01, 2007 10:41 pm Sujet du message: |
|
|
Attila wrote:
Thank you Orio this very useful lesson. Please continue to share your Photoshop knowledge! |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Avr 01, 2007 10:43 pm Sujet du message: |
|
 Posté: Dim Avr 01, 2007 10:43 pm Sujet du message: |
|
|
Orio wrote:
This is a 100% crop detail of the image before and after treatment:
direct link:
http://img365.imageshack.us/img365/9871/denoisesharpbeforeafterem6.jpg
As you can see, I have been able to denoize, then sharpen, but you don't see the artifacts!!
Of course here there is only the smart sharpen pass, not the final sharpen pass because I did not resize image.
In the resized image above, you have also the final sharpening pass applied (very lightly, as I do as little sharpening as possible) _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
LucisPictor
 Inscrit le: 26 Fév 2007 Messages: 17633 Localisation: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Posté: Lun Avr 02, 2007 12:08 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 12:08 pm Sujet du message: |
|
|
LucisPictor wrote:
Very well done, Orio!
I know this process and have used a very similar one several times.
But in your first example picture the sharpening went - in my eyes - a little too far, since we can see the telltale "stairs" at the blades of the plant.
Of course, this is a matter of taste and use.
Carsten _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Lun Avr 02, 2007 3:08 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 3:08 pm Sujet du message: |
|
|
Orio wrote:
| LucisPictor a écrit: |
Very well done, Orio!
I know this process and have used a very similar one several times.
But in your first example picture the sharpening went - in my eyes - a little too far, since we can see the telltale "stairs" at the blades of the plant.
Of course, this is a matter of taste and use.
Carsten |
What are the telltale stairs? Are you sure that you are looking at the picture in the original size? Sometimes depending on the screen resolution, the picture may get shrinked, and then you see artifacts. Please check the direct link and let me know if you still see artifacts, and where, so that I can look into it. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
LucisPictor
 Inscrit le: 26 Fév 2007 Messages: 17633 Localisation: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Posté: Lun Avr 02, 2007 4:13 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 4:13 pm Sujet du message: |
|
|
LucisPictor wrote:
Yes, I did download the picture and looked at it using a photo viewer.
If you look at the tips of the blades, you can see little "stairs" at their edges.
It is not bad, but I always try to avoid those.
Carsten _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de
Dernière modification par LucisPictor le Lun Avr 02, 2007 6:05 pm ; modifié 1 fois au total |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Lun Avr 02, 2007 4:43 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 4:43 pm Sujet du message: |
|
|
Orio wrote:
| LucisPictor a écrit: |
Yes, I did download the picture and looked at it using a photo viewer.
If you look at the tips of the blades, you can see little "stairs" at their edges.
It not bad, but I always try to avoid those.
Carsten |
Man. you have a good sight! Either that, or I need to buy a new pair of eyeglasses!
Anyway what you see can be (and probably has been) caused by the Jpeg compression. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
LucisPictor
 Inscrit le: 26 Fév 2007 Messages: 17633 Localisation: Oberhessen, Germany / Maidstone ('95-'96)
Expire: 2013-12-03
|
 Posté: Lun Avr 02, 2007 6:08 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 6:08 pm Sujet du message: |
|
|
LucisPictor wrote:
That's right. Compression or Sharpening are the main causes for that.
I just mentioned it, because this is the only part we have to be careful when we follow your excellent idea of how to sharpen a picture.
Carsten
P.S.: In the last test my eyes achieved a 120%. Yes, I have good eyes.  _________________ Personal forum activity on pause every now and again (due to job obligations)!
Carsten, former Moderator
Things ON SALE
Carsten = "KAPCTEH" = "Karusutenu" | T-shirt?.........................My photos from Emilia: http://www.schouler.net/emilia/emilia2011.html
My gear: http://retrocameracs.wordpress.com/ausrustung/
Old list: http://forum.mflenses.com/viewtopic.php?t=65 (Not up-to-date, sorry!) | http://www.lucispictor.de | http://www.alensaweek.wordpress.com |
http://www.retrocamera.de |
|
| Haut de page |
|
 |
Jigt
 Inscrit le: 16 Mar 2007 Messages: 412 Localisation: Belgium
|
 Posté: Lun Avr 02, 2007 7:44 pm Sujet du message: |
|
 Posté: Lun Avr 02, 2007 7:44 pm Sujet du message: |
|
|
Jigt wrote:
My experience is sharpening is the very last thing you do.
If you sharp a 6mpixel and then rduce the size you will end up with terrible artefarcts.
In stead of setting your iso to 800 you better make a picture in raw at 200 and the make it lighter. works splendid with Pentax photolaboratory.
The best sharpening you get this way.
Set your pic in the modus "lab colour" open the channell toolbox choose the channel that gives the B/W image, do the sharpening and then get the colours back. After sharpening you go back to the RGB modus. Works perfect!!
Guido _________________ nature pictures at www.ranaphoto.net
My pictures in the http://www.pentaxphotogallery.com/guidofranssens |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|