MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Sigma Mini Wide II disassembly?
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello everybody! New at this forum.

I have a Sigma Mini Wide II (Pentax mount with A setting). It has a slight bit of a "wobble" in the focus ring. It is smooth when you turn it but you can wiggle it back and forth a bit (towards and away from the camera house if you understand what I mean). I guess there is something that needs tightening in there.

Does anyone have any experience how to take this one a part and do you know what I need to tighten to fix this?


Reply

LIJ a écrit:
Hello everybody! New at this forum.

I have a Sigma Mini Wide II (Pentax mount with A setting). It has a slight bit of a "wobble" in the focus ring. It is smooth when you turn it but you can wiggle it back and forth a bit (towards and away from the camera house if you understand what I mean). I guess there is something that needs tightening in there.

Does anyone have any experience how to take this one a part and do you know what I need to tighten to fix this?

Just googled and found some infos on the bottom first link. I think someone here may serviced this lens too.
http://photo.net/classic-cameras-forum/008yn2


Reply

Hello LIJ. I have this very lens and have disassembled it in the past, for removing the "Ricoh pin" and cleaning some elements, I think. I don't remember the details, but I would begin by unscrewing the beauty frontal ring. You will need some friction tool for this. I suppose you will find some screws below the ring and hopefully the means to thigh the focus ring. The filter rim in mine is badly dented, so I cannot remove it any longer Sad . If you have no previous experience, I would leave it alone, or take it to a repair shop. Regards

Javier