MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

The ultimate stuck filter remover
Voir le sujet précédent :: Voir le sujet suivant  


Reply

At any time I have to screw out a filter on a lens that has suffered a small bump and it's stuck in, I wonder how to remove it. I've tried several techniques with some moderate success: rubber gloves, "boa constrictor" like wrench, several plumbing tools...

Tonight I was wondering what to try this time whilst I was cooking in the kitchen. I opened the drawer with all the kitchen gadgets, looking for a grater, when a bulb lighted in my mind when looking at this:

.

Yes, an opener!. A filter is not very different from a cap of a jelly jar...



So I left everything I was doing and went to try it:



It works!!

Hope this will be useful for someone else.

Regards.
Jes.


Reply

Wow, thats a great idea. I had a stuck filter a few years ago that drove me crazy for weeks until I finally got it off somehow.


Reply

Very clever!


Reply

SVP a écrit:
Very clever!

+1


Reply

+1


Reply

Same kind of thing, this is also for jar lids.





But it now lives in my camera tool box. Wink


Reply

+1 to both hints Very Happy ...


Reply

I bought a very cheap tool from Jessops for doing this.

Despite having an immense grip, my Hoya CPL has such a small grip ring I was unable to apply any pressure to it.


Reply

martinsmith99 a écrit:
I bought a very cheap tool from Jessops for doing this.

Despite having an immense grip, my Hoya CPL has such a small grip ring I was unable to apply any pressure to it.


Those grippers that I showed earlier are from the UK store 'Home Bargains' and cost about £5, they are also all over Ebay.
Two of those shifted the most stubborn filter I've seen, the light blue part is quite firm silicone so it doesn't scratch and it grips like a grippy thing, even right on it's edges.
They really are very good.


Reply

Jesito a écrit:
At any time I have to screw out a filter on a lens that has suffered a small bump and it's stuck in, I wonder how to remove it. I've tried several techniques with some moderate success: rubber gloves, "boa constrictor" like wrench, several plumbing tools...


Glad to hear that you got the filter off... but for the next time, or for others in the same situation, keep in mind that forcefully unscrewing a jammed filter can also cause new damage to the threads on the lens! Shocked

This is especially true if the impact has caused the filter to skip a thread, or has distorted the filter so that its threads are no longer straight. Removing the filter by unscrewing it can effectively cut new threads into your lens, damaging the lens threads so that other filters will not screw on properly anymore. Neutral


For situations where the filter is damaged and stuck tight, another removal option (which is safer for the lens) is to remove the retaining ring for the glass, and then pluck the filter glass out (with a suction cup, sticky tape, or just gravity). When you are down to just an empty filter ring left, you can grab the edge with a pair of pliers and twist the pliers. This will bend a 'Z' shape into the filter ring, which will make its diameter shrink and it will simply fall off without damaging the lens threads. Wink The filter will of course not be usable after this... but filters are a lot cheaper than lenses. Wink


Reply

Hi Jes - that's cool [EDIT] but Jes, to be honest, forget it ...

I would also like to recommend the same to Lloydy --

but two slippers with fine rubber surface against each other - that's enough

bottom sides, of course Smile

for bigger diameters - rubber door mat on the floor and push-and-turn Smile

the torque is -- extremely efficient.

tf


Reply

the worst thing is developing pressure on the side of the filter

-- why?

Because you changing a RING to ELLIPSE -

and it's really hard to turn RING (LENS FILTER THREAD) against ELLIPSE (pushed filter) - that is the most common problem with unscrewing filter from lens ..

I have sent a few pictures to cooltouch a few weeks ago how to unscrew stuck filter.. Smile but he knew how to do it.

and I am going to dig them out ..


here they are Smile







Reply

Nice tips Smile


Reply

Thanks for the hints. Very Happy


Reply

Yep, thanks for that nice tricks!... (Trifox, Scheimpflug, Lloydy)

Regards.
Jes.


Reply

The latter being useless on CPLs of course.