MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Help me develop my first film in nearly 2 decades!
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi folks

I'm very familiar with BW film developing from my art college days, developed hundreds.

Reason I need some help now is I don't know the right dev tmes for my chemicals.

I have an ancient still sealed box of Ilford Hyfin developer.

The film I have to develop is a Kodak TMAX 400 Pro.

Now, I can only find dev times for Hyfin for these films:

Agfapan 400 - 18 mins
Ilford HP5 (400 ASA) 20 mins
Ilford FP4 - 16 mins
Plus-X - 18 mins
Tri-X Pan - 35 mins

So I'm a bit confused, do I treat this TMAX 400 Pro like the Agfa/Ilford 400 ASA films and develop it for 18-20mins?


Reply

How about comparing dev times for T-Max 400 and HP5 in a modern developer and applying that ratio to the HP5 time in Hyfin?

Have you thought about snipping one or two frames from the start of the roll and experimenting before trying the whole roll? If you have any keepers I'd be inclined to use a modern developer and experiment with your Hyfin on something you don't mind losing.

You could try asking Ilford, they're very helpful:
http://www.ilfordphoto.com/contact.asp


Reply

I don't have any other developers to experiment with.

I emailed Ilford, they told me Hyfin wasn't suitable for 'modern films' and suggested ID-11.

The only other 35mm BW films I have are efke 50ASA so wouldn't give me much of a comparison methinks.


Reply

If you can't find any information cut a test film to several parts and try different times you will waste one roll , but you able to find best time for sure.


Reply

iangreenhalgh1 a écrit:
I don't have any other developers to experiment with.

I emailed Ilford, they told me Hyfin wasn't suitable for 'modern films' and suggested ID-11.


I'd pay attention to this advice. You don't have access to any modern developers where you live? What about a do-it-yourself developer, like caffenol? This site has a LOT of information, but it's worth the read.

http://caffenol.blogspot.com/

I'm gonna try this stuff as soon as I run out of D-76.


Reply

Hi Michael.

Nearest shop that would sell developer is perhaps 75 miles away, i live in a remote spot!

I know I have an old packet of D-76 in a drawer somewhere, I'll have to find it.

Never heard of caffenol, I'll take a look, thanks.


Reply

Well, I found a roll of 200ASA BW film, Jessop's own brand I bought in bulk and loaded myself years ago.

Ran it through the Hyfin, 12 minutes with agitation for 10 secs every 90 secs then washed for 8 minutes under a running tap then fixed for 8 minutes in sodium thiosulphate fixer.

Result?

Nada, nothing, zero, zilch, a brown film still covered in emulsion, like the developer had had no effect on it.

I mixed one packet of Hyfin with 21.5oz of water as specified and used 8.5oz of it in my tank, surely I should have seen the developer do something to the film?

I've thrown away the rest of the developer, a bit puzzled now, never had this happen before, how can a packet of sealed chemicals not exposed to air or light go bad?

I think I might just get a bottle of Rodinal and be done with it...


Reply

You mentioned it was old film. Maybe it wasn't the developer? Maybe it was the film?


Reply

Attila a écrit:
If you can't find any information cut a test film to several parts and try different times you will waste one roll , but you able to find best time for sure.

Absolutely. This is great advice, well worth doing in my opinion. The only problem with this method is that you will cut a few pictures in half... but losing a few pictures is better than losing the whole roll. Wink As Attila said though, it is best used for a test roll, with pictures on it that you don't really care about. Wink


iangreenhalgh1 a écrit:
Nearest shop that would sell developer is perhaps 75 miles away, i live in a remote spot!

Welcome to the club. Very Happy I order most of my supplies from Freestyle in the USA. Even with international overseas shipping to New Zealand, it's easier (and sometimes cheaper!) than driving for 4-5 hours to pick something up "locally". Wink


Reply

cooltouch a écrit:
You mentioned it was old film. Maybe it wasn't the developer? Maybe it was the film?


I think the T-MAX films came out sometime in the mid 80s? Kodak publications say that the name changed from "Kodak T-MAX Professional" to "Kodak Professional T-MAX" in Sept 2002, so iangreenhalgh1's film ("Kodak TMAX 400 Pro") would be between those dates. So at best, it is only ~9 years old... and at worst, ~25 years. For what it is worth. Wink


But regardless, the brown coloring is a good clue that the chemicals are to blame.

* If the film from the leader (fully exposed to light) was black, and other parts of the film were clear, then we would know that the developer & fixer are both OK.
* If the leader was transparent/clear (aside from the film base color), we would know that the developer was bad but the fixer was OK.
* If you saw anything of an image on the film, but the film was foggy and not transparent, then the developer was at least partially working but the fixer was bad.
* But since it is brown, and not clear on any of the unexposed edges later on, then the developer and fixer are probably both bad.


How old is the fixer, and how long has it been mixed? Were the chemicals stored as powders, stock solutions, or working solutions?


Reply

Ian, have you thought about buying chemicals online? I can recommend Speed Graphic, or a wider range from Silverprint.

I bought some Ilfotec LC29 from Silverprint recently and it's perfect for low-volume users like me. If you go for Rodinal, be careful what you buy. The bottles labelled "One Shot" or "Spezial" are not the original formula.


Reply

I'll have to mail order some proper chemicals I think.

There had been no reaction at all between developer and film, all of the emulsion was still there, the fixer had worked a little at least as it had made the emulsion soft and I could scrape some off with a fingernail in places.

For fixer I disolved 235g of Sodium Thiosulphate in 1 litre of water.

I threw the rest of the mised Hyfin developer down the sink, there are two sealed packets left but I think I'll just keep them as a collectable, certainly doesn't seem to work.

I still don't understand how chemicals stored in airtight selaed packets can go bad, maybe they have broken down and changed chemical structure?

The film was from 1999 BTW.

Not sure how old the TMAX 400 Pro I also need to develop is, I think it's from 2002 but I've thrown the box away now.


Reply

iangreenhalgh1 a écrit:

I still don't understand how chemicals stored in airtight selaed packets can go bad, maybe they have broken down and changed chemical structure?

- it's very hard to get a container which is 100% airtight. Also a sealed bottle of coke won't have any bubbles in it when you open it in 10 years. Some gases like hydrogen are also able to diffuse readily through massive steel!
- also if the containeris airtight, the content ist exposed to fresh air in everytime you open it
- some chemicals also react with the container
- some chemicals are sensitive to light
- some chemicals can be used slowly by bacteria
- and yes many many chemicals are simply sensitive to temperature. Theire struture will rearrange, decompose, split to other compounds and so on.

You also have to store LSD in the freezer, or its effect will be gone after a few weeks, because it decomposed practically completly Wink

But many devolopers and films will work also after decades if stored correctly. They only "loose some potency".


Reply

The hyfin was useless, threw it away after ruining two films.

Been using Microphen to develop films, getting nice results with it.