| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
std
 Inscrit le: 09 Fév 2010 Messages: 1826 Localisation: Bulgaria
|
 Posté: Lun Fév 21, 2011 9:12 am Sujet du message: Which grease for lenses? |
|
 Posté: Lun Fév 21, 2011 9:12 am Sujet du message: Which grease for lenses? |
|
|
std wrote:
Hi,
What do you use when you need to clean the old grease from lenses and re-lube it. White lithium grease or teflon grease?
Please share your experience if possible with product available in Europe.
Thanks,
Stefan |
|
| Haut de page |
|
 |
Sevo
 Inscrit le: 22 Août 2008 Messages: 1189 Localisation: Frankfurt, Germany
Expire: 2012-12-03
|
 Posté: Lun Fév 21, 2011 12:29 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2011 12:29 pm Sujet du message: |
|
|
Sevo wrote:
I use NYE Helical Grease (available in Europe from Microtools). The white lithium grease I have around (Klüber and some noname stuff from the bike shop) has the wrong action for helicals in that it starts heavy and gets more fluid as the motion continues. _________________ Sevo |
|
| Haut de page |
|
 |
std
 Inscrit le: 09 Fév 2010 Messages: 1826 Localisation: Bulgaria
|
 Posté: Lun Fév 21, 2011 3:28 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2011 3:28 pm Sujet du message: |
|
|
std wrote:
like this ?
http://www.micro-tools.de/en/Oils-Greases/Grease-Helical-10-Light-8ml.html
waw.. 34Euro's for 8ml.. for sure if should be good one  |
|
| Haut de page |
|
 |
indianadinos
 Inscrit le: 06 Juil 2008 Messages: 1310 Localisation: Toulouse, France
Expire: 2011-12-05
|
 Posté: Lun Fév 21, 2011 7:39 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2011 7:39 pm Sujet du message: |
|
|
indianadinos wrote:
Hi,
I use white lithium grease, as it is easily found here in France, but i'm not a professional repairman and i service only lenses for my friends (read: at no charge) ...
I found a post on a blog (sorry, don't have the link in mind right now) where the author showed how to re-lube a Zeiss lens using some molybdenum bisulfite grease, but it seems that it is hard to find and expensive ...
Will post the link here as soon as i found it ... _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Haut de page |
|
 |
trifox
 Inscrit le: 14 Mai 2008 Messages: 3614 Localisation: UK
Expire: 2014-05-29
|
 Posté: Lun Fév 21, 2011 9:46 pm Sujet du message: |
|
 Posté: Lun Fév 21, 2011 9:46 pm Sujet du message: |
|
|
trifox wrote:
http://www.screwfix.com/prods/71936/Van-Car-Accessories/Car-Lubricants/3-in-1-Oil-Pro-White-Lithium-Grease
if this one is good for marine -- it has to be good for helicoid --
NOTE: I have never tried this but _ I am going to do so
tf _________________ Flickr.com |
|
| Haut de page |
|
 |
martinsmith99
 Inscrit le: 31 Août 2008 Messages: 7029 Localisation: S Glos, UK
Expire: 2013-11-18
|
 Posté: Mar Fév 22, 2011 7:10 am Sujet du message: |
|
 Posté: Mar Fév 22, 2011 7:10 am Sujet du message: |
|
|
martinsmith99 wrote:
I find lithium grease too thick. Mine isn't white in colour so probably not the right stuff. _________________ Casual attendance these days |
|
| Haut de page |
|
 |
std
 Inscrit le: 09 Fév 2010 Messages: 1826 Localisation: Bulgaria
|
 Posté: Mar Fév 22, 2011 7:49 am Sujet du message: |
|
 Posté: Mar Fév 22, 2011 7:49 am Sujet du message: |
|
|
std wrote:
I guess it should comply to the following requirements:
- Should not 'creep' - in order not to oil the lens elements.
- The friction should be consistent in a wide temperature range (for example it should not harden too much if you use the lens on -10 C). But this is not so critical as the lenses i intend to service are are not AF.
Is the white one OK for that?
I've heard that there is a special grease for lenses used by Zeiss technicians .. and I guess that most probably it will be very expensive.
Have someone heard what it will be like?
Thanks,
Stefan |
|
| Haut de page |
|
 |
shauttra
 Inscrit le: 17 Nov 2009 Messages: 778 Localisation: Latvia
|
 Posté: Mar Fév 22, 2011 8:03 am Sujet du message: |
|
 Posté: Mar Fév 22, 2011 8:03 am Sujet du message: |
|
|
shauttra wrote:
| std a écrit: |
I guess it should comply to the following requirements:
- Should not 'creep' - in order not to oil the lens elements.
- The friction should be consistent in a wide temperature range (for example it should not harden too much if you use the lens on -10 C). But this is not so critical as the lenses i intend to service are are not AF.
Is the white one OK for that?
I've heard that there is a special grease for lenses used by Zeiss technicians .. and I guess that most probably it will be very expensive.
Have someone heard what it will be like?
Thanks,
Stefan |
I had a teaspoon with extremely expensive ( few hundreds euro for small bucket) grease from lens grinding machine, but i didn`t see any difference, so i made my own grease from Stihl chainsaw grease and WD-40 mix. _________________ Mto-1000, Tair-3, Auto Exaktar 135mm 2,8, Samyang 14mm 2.8,
Jupiter 37A, Carl Zeiss Sonnar 135/3.5,
Helios-44, Mir-1, Revuenon 50/1.4,
Carl Zeiss Pancolar 50/1.8, Samyang 24/1.4, Auto Vivitar 35/2.8
www.radosi.lv
http://shauttra.blogspot.com |
|
| Haut de page |
|
 |
trifox
 Inscrit le: 14 Mai 2008 Messages: 3614 Localisation: UK
Expire: 2014-05-29
|
 Posté: Mar Fév 22, 2011 8:13 am Sujet du message: |
|
 Posté: Mar Fév 22, 2011 8:13 am Sujet du message: |
|
|
trifox wrote:
| shauttra a écrit: |
| std a écrit: |
I guess it should comply to the following requirements:
- Should not 'creep' - in order not to oil the lens elements.
- The friction should be consistent in a wide temperature range (for example it should not harden too much if you use the lens on -10 C). But this is not so critical as the lenses i intend to service are are not AF.
Is the white one OK for that?
I've heard that there is a special grease for lenses used by Zeiss technicians .. and I guess that most probably it will be very expensive.
Have someone heard what it will be like?
Thanks,
Stefan |
I had a teaspoon with extremely expensive ( few hundreds euro for small bucket) grease from lens grinding machine, but i didn`t see any difference, so i made my own grease from Stihl chainsaw grease and WD-40 mix. |
shauttra -- I think your receipt is more than OK
tf _________________ Flickr.com |
|
| Haut de page |
|
 |
56 DIN
 Inscrit le: 24 Avr 2010 Messages: 1658 Localisation: Germany Erbach /ODW
Expire: 2021-11-18
|
 Posté: Mer Fév 23, 2011 5:11 pm Sujet du message: |
|
 Posté: Mer Fév 23, 2011 5:11 pm Sujet du message: |
|
|
56 DIN wrote:
be careful with chainsaw grease. Most of them today are biodegradable, which means in best case they gum up very soon. Shure WD 40 makes the counter reaction to solve the gummed oil. But in worst case these oils destroy paint layers, many types of rubber and plastic and even may be aggressive to aluminium and zinc. So if you use it assure it is non biodegradable oil. _________________ Thomas
NEX & manual lenses
Nikon & manual lenses |
|
| Haut de page |
|
 |
visualopsins
 Inscrit le: 05 Mar 2009 Messages: 11698 Localisation: California
Expire: 2027-07-11
|
 Posté: Mer Fév 23, 2011 5:36 pm Sujet du message: |
|
 Posté: Mer Fév 23, 2011 5:36 pm Sujet du message: |
|
|
visualopsins wrote:
I think he means the bar tip grease, mine is blue, looks like blue lithium, same as wheel bearing grease.
The viscosity of the grease is important for lens helical feel; viscosity to use depends on surface areas in contact, the larger the contact area, the less viscosity grease for similar 'feel', turning resistance and damping. A mix of different viscosity greases is used to achieve intermediate viscosities, and for combining unique properties of each.
Does WD40 'dry' from the grease over time, make focus stiff?
Bicycle shops have greases! _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Haut de page |
|
 |
calvin83
 Inscrit le: 12 Avr 2009 Messages: 7740 Localisation: Hong Kong
|
 Posté: Mer Fév 23, 2011 5:59 pm Sujet du message: |
|
 Posté: Mer Fév 23, 2011 5:59 pm Sujet du message: |
|
|
calvin83 wrote:
Shin-Etsu Chemical makes some silicone greases. I think their G series may be suitable for camera lenses.
Catalog:
http://www.silicone.jp/e/catalog/pdf/grease_e.pdf _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Haut de page |
|
 |
terminalcity
Inscrit le: 29 Mai 2011 Messages: 2 Localisation: Montreal Canada
|
 Posté: Mar Juin 07, 2011 9:19 pm Sujet du message: greases |
|
 Posté: Mar Juin 07, 2011 9:19 pm Sujet du message: greases |
|
|
terminalcity wrote:
For Nikkor lenses you can try these lens greases on eBay. (Apologies for shameless plug, but this stuff is hard to find!)
The general problem with lens greases are that there are dozens of different kinds by many different manufacturers, all with different specs. If you had the engineering specs or know the original grease used, you might be able to figure out the best one, otherwise you have to rely on rule-of-thumb and experimentation. If you get the OEM grease for whatever lens you are working on, it will likely last longer than the corner hardware store grease, since the OEM greases are precision optical greases with synthetic bases that are more stable and long-lasting than your typical grease.
Another thing overlooked in lens regreasing, in the Nikkors for example, is that these lenses used Oil Barrier: a coating beside the greased areas that helps to prevent grease form crossing the barrier. Most times people omit this when regreasing. |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|