MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

NX10 NX100 External Wired Shutter Release and Hot Shoe Flash
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I have decided to purchase, in November during the Christmas selling frenzy on e*bay, an NX10 or the newly announced NX20 - if they are out.

Thinking ahead, can anyone advise me, with certainty, if the release and or flash that I have for either my Canon XTi or Olympus E-510 will function with the Samsung (assuming the upcoming NX20 is the same as the NX10)?

I only use the flash for fill, so the bells and whistles don't have to all work perfectly - just flash. I use the wired shutter release for street shooting, so the simple push button is all I need - I don't want a wireless unit.

Thanks for any input.


Reply

The NX10 is a bit picky with third party flashes: my Nikon SB-28 does not work with it for example, but my Pentax AF280T does. But if you use the flash for fill only, the built-in one works pretty well, and you can set manual EV compensation for the flash very easily with the Fn button.


Reply

Thank you, then I will just stick with the built in flash.

Also, I have found reference to the shutter trigger part of my question, Canon EOS will work with the NX10.


ludoo a écrit:
The NX10 is a bit picky with third party flashes: my Nikon SB-28 does not work with it for example, but my Pentax AF280T does. But if you use the flash for fill only, the built-in one works pretty well, and you can set manual EV compensation for the flash very easily with the Fn button.