MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Mounting 6x6 slides
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I have an old Aldis 6x6 projector but I don't have any slides to project. Sad

I've got about a dozen rolls of developed Provia and Velvia but none of the labs I've tried would mount 6x6, only 35mm. I've seen 6x6 plastic and cardboard mounts for DIY. Anybody tried them?


Reply

I did mount a few 35mm, with plastic glassless mounts. It's not really a difficult task, just be sure to use cotton gloves and have handy an anti static cloth. I used with great care a guillotine paper cutter to cut square the film.
My only concern would be flatness with medium format film, maybe a mount with a glass is gonna be mandatory.

Cheers, M.


Reply

marty a écrit:
I did mount a few 35mm, with plastic glassless mounts. It's not really a difficult task, just be sure to use cotton gloves and have handy an anti static cloth. I used with great care a guillotine paper cutter to cut square the film.
My only concern would be flatness with medium format film, maybe a mount with a glass is gonna be mandatory.

Cheers, M.

Thanks Marty, the guillotine is a great idea. I have a wheel type cutter which would do it. The glass slides are quite expensive and I've been reading that some people had problems with them. I think I'll try the no-glass plastic ones first and see how it goes.


Reply

I found slide frames with glasses locally , but I sold them.I think no way to mount 6x6 slides without glasses. A projected 6x6 can be awesome! I look forward your project!


Reply

I have about 30 6X6 slide mounts, some with glass and some without. I lucked out and found them at a garage sale from an old professional photog. I haven't seen any for sale on eBay or Amazon, but they have to be made by someone still, right?


Reply

David a écrit:
I have about 30 6X6 slide mounts, some with glass and some without. I lucked out and found them at a garage sale from an old professional photog. I haven't seen any for sale on eBay or Amazon, but they have to be made by someone still, right?

I really don't want to buy high quality glass slides until I've tried this thing out. I don't even know how the projector performs, it's quite old and the lamp is an old tungsten type, it looks fairly dim to me.

The cheapest mounts I've found so far are £5.29 for 25. The same company sells similar 35mm mounts at £5.49 for 100!
http://www.firstcall-photographic.co.uk/products/2781/ap-slide-mounts-glassless-6-x-6-pack-of-25

These mounts have a locating pin in each corner and I understand the idea is to pierce these pins though the film, which keeps it flat. It sounds fiddly.

There's also a company called Gepe who make mounts with ANR glass at £16 for 20 from Speed Graphic. That's quite expensive for what I want to do now, but if the projector is OK I might give them a go to see if they're easier to use and keep the film even.


Reply

Peter, the AP were just the ones I used for my 135s. Good quality for the price. Nothing to pierce through the film Smile. The pins are just keeping closed the mount. There is a tiny recess in the inside of one of the two parts of the mount that keeps the film in place. One side is gray the other white so you cannot mistake the base for the emulsion side Smile. The mount can be opened and closed at will. Or at least the 135s are made that way.

Cheers, M.


Reply

Peter, a few years ago I have bought a mounting press and some 6x6 glass-less frames at Jobo. The mounting press is not necessary, but I found it helps. Glass frames cost a lot more and are perhaps worth only for your best photos. They however require more care in storage (humidity control) than glass-less frames.
Viewing 6x6 slides projected on a large wall is a real thrill.
This requires a quite long room though. In short rooms, there is not much visual difference with 24x36 slides.


Reply

Thanks Marty, Orio and David. I've ordered 50 AP glass-less frames and we'll see how it goes.

Orio, I'm sure you're right about long rooms. Sadly the longest room I have is ~5m and I don't think the lamp in this projector has enough oomph for anything bigger. Common sense tells me that 6x6 slides are going to give better resolution than 35mm at the same projecting distance, but I don't know what difference this will make in practice until I try it. You've given me a thought - the church has an overhead digital projector and plenty of space - I might ask them if I can try projecting some scans. Smile


Reply

peterqd a écrit:

Orio, I'm sure you're right about long rooms. Sadly the longest room I have is ~5m and I don't think the lamp in this projector has enough oomph for anything bigger. Common sense tells me that 6x6 slides are going to give better resolution than 35mm at the same projecting distance, but I don't know what difference this will make in practice until I try it. You've given me a thought - the church has an overhead digital projector and plenty of space - I might ask them if I can try projecting some scans. Smile


In my home, I can only distance the projector by 4-5 meters, and the resulting image is so small that I can not see any difference in quality between small format and medium format slides.
Obviously, if I could cast the image on a large wall from 10-15 meters distance, I'm sure that the difference would be visible.
So if the church has lots of room and a big white wall, it will surely be worth the try.


Reply

Orio a écrit:
peterqd a écrit:

Orio, I'm sure you're right about long rooms. Sadly the longest room I have is ~5m and I don't think the lamp in this projector has enough oomph for anything bigger. Common sense tells me that 6x6 slides are going to give better resolution than 35mm at the same projecting distance, but I don't know what difference this will make in practice until I try it. You've given me a thought - the church has an overhead digital projector and plenty of space - I might ask them if I can try projecting some scans. Smile


In my home, I can only distance the projector by 4-5 meters, and the resulting image is so small that I can not see any difference in quality between small format and medium format slides.
Obviously, if I could cast the image on a large wall from 10-15 meters distance, I'm sure that the difference would be visible.
So if the church has lots of room and a big white wall, it will surely be worth the try.

Orio, I've been pondering this. Assuming you use the same projecting lens for both 35 and 6x6 (to keep things equal) and you are projecting an image to the full extent of a screen of set size, you would need to have the projector nearer the screen for the 6x6 wouldn't you? This has to mean better resolution. If you project both slides from the same distance I agree there wouldn't be much difference, only the image sizes.