MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Developing Colour Film as B&W
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I have a number of rolls of cheap colour film I bought in bulk with the intention of using. As the cost of processing puts me off, I decided I'm going to try a few rolls as B&W experiments.

Does anyone know a resource for developing times? In particular Kodak Color Plus developed in Rodinal (what else?).


Reply

Hi, there.
I would try a search on flickr with something like "crossprocess c-41 as bw" as a key, you might get lucky and find some development times to use as a starting point. Another idea would be the "Massive Chart", pick the times for BW-400CN or XP-2 (I'm sure there are listed for X-pro in rodinal) and cut them by a 40%. In any case I think some experiment is due. Make some clip tests, check what looks best based on your needs (scan or traditional print) and then decide.
You might also consider getting a C-41 kit and trying developing regular as color. The only extra equipment you would need is a plastic tub to make a water bath to keep the tank and chems at 38°C.

Cheers, M.


Reply

Ian did it , result was so so as I remember.


Reply

http://www.flickr.com/groups/c41inbw/discuss/


Reply

ludoo a écrit:
http://www.flickr.com/groups/c41inbw/discuss/
Very useful; thanks.


Reply

I guess the main problem will be the orange tint.
Not so with slides, however.
Probably slides are better indicated for this type of experiment than negative film.


Reply

The orange mask isn't really a problem if you are scanning the negatives. Wink