MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Shiny negative carrier/holder
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I have two carriers (35mm and 6x6) for the beseler 67. Both are shiny, unfinished aluminum instead of the more traditional all black or black bottom and white top configurations.

Does anyone have experience? Would/could internal reflections be an issue?

Thanks you
~Marc


Reply

Hey, there.
I have no experience with this particular enlarger but I'd say generally yes. On the basis of what I have observed every shiny element that is not functionally part of the optical/light path can potentially be a source of parasite reflections. Even black surfaces if they are not completely matt can pose a problem (it occurred to me). Having said that you could always paint them matt black should the issue arise.

Cheers, M.


Reply

Thanks.

In searching for anything about enlarger reflections most forum posts/websites talk about filing a 35mm negative carrier out to make it "full-frame" and how the shiny edges of the shaved metal can create problems. But I've found no references saying these reflections streak the negative (my concern), only that they create a rough double-edge border when printing.

But yes, generally I agree that anything shiny is to be avoided in the optical path.


Reply

One of my 6x9 Carrirs for my Bessler 23C is unfinished alu as you describe.
I've never experienced any issues to date. just sayin..


Reply

Citation:
One of my 6x9 Carrirs for my Bessler 23C is unfinished alu as you describe.
I've never experienced any issues to date. just sayin..


Good to hear! I will definitely have to see for myself. In any case, I will not modify the carriers I have now. They're just too nice make cruddy looking with a matte paint that will likely mark and scrape-up with usage. If reflections do create the rough double-borders, it would be easy to crop out with an easel. That effect can look cool sometimes too..