| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mer Jan 18, 2012 6:03 am Sujet du message: Developing film in coffee |
|
 Posté: Mer Jan 18, 2012 6:03 am Sujet du message: Developing film in coffee |
|
|
PaulC wrote:
I thought "caffenol" development was just a party-trick way of getting something crummy out of kitchen chemicals. Now I've tried it I'm really very excited by it. The results I've got are better than I got from Fomadon-P, which is one of the few chemicals I'm able to get sent here.
You can see the results and the method I used here:
http://fotoblogzone.com/2012/01/17/discovering-caffenol/
as well as scans of the whole 6x6 frame at small print size and a section of it at a huge size, equivalent to a one metre (3ft) by one metre print (though I would expect a real print to be better than the scan).
The cost of using caffenol-C as a one-shot developer is about double the cost of using a commercial chemical for home developing, though somebody says you can use the same developer for three or more films as long as you use it on the day you make it.
Looking around the net, though, I see that the formulation I tried uses a lot more coffee than many others, some of them would be the same price as commercial one-shot development. I haven't tried them (yet) so I can't say if they work as well as the one I stumbled on. The price doesn't really matter, it's still half the High-Street rate and a fifth or less of what a professional lab would charge.
The advantages of this for me are:
1) No difficulty in securiing developer - it'a all in the supermarket.
2) I can make whatever quantity I want to use that day so there are no developer bottles lying around going stale.
3) One-shot developing gives maximum control, I've been reusing commercial developer rather than using the one-shot method but after the first film I don't really know how strong/oxydised it is and extending development to compensate reduces the amount of contrast.
4) No concerns about toxicity. I know the sodium carbonate (washing soda) is alkaline but it's not dangerous as long as you wash it off and don't splash it in your eyes or drink it. I don't know anything about the toxicity or otherwise of Fomadon or other commercial offerings.
Anyway, if anyone has been looking for an alternative to commercial developer, this is it - and it isn't just a joke, it really works. Unfortunately, you still need fixer. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 7:26 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 7:26 am Sujet du message: |
|
|
GrahamNR17 wrote:
You missed the downside: You'll be lucky to got a full set of tones that a better quality developer will yield. I don't remember the exact figures, but I seem to recall when we had a play with it 30 years ago that we were only achieving dynamic range of the order 2.5. That's a pretty flat neg.
However, for specific effects it's ok. |
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mer Jan 18, 2012 8:38 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 8:38 am Sujet du message: |
|
|
PaulC wrote:
The densities I got seem to be pretty much the same as I get from processing in conventional developer and, indeed, in what I got back from Peak Imaging (though they are maybe a bit stronger). I don't know how to determine the true dynamic range.
Have you looked at the shot on my blog? Does it seem to be lacking in tonal range? _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 8:51 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 8:51 am Sujet du message: |
|
|
GrahamNR17 wrote:
Yes, the image does look good. I may have another play with caffenol in the summer and see what it can do with some 'difficult' negs with vast tonal ranges. It'll be interesting to assess the negs with the densitometer and refresh my memory with a more scientific approach. That said, art doesn't necessarily need science. As you have observed, the relative 'eco friendliness' is quite attractive too  |
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mer Jan 18, 2012 9:06 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 9:06 am Sujet du message: |
|
|
PaulC wrote:
I wish I understood what I was doing. Developing has always been very much a "follow the recipe" technique for me. I did delve into Ansel Adams's "The Negative" but had considerable difficulty understanding anything (thankfully, I've since read that I'm not alone in this and he has a talent for making even the simple look complex).
It is quite possible that the scanner "improves" the negs, because I can set the limits for black and white and it adjusts the rest accordingly. I would like a bit more contrast but that generally seems to be lacking from all my films and I had suspected that the makers have reduced the amount of silver since I was using film in the 70s, making them thinner.
Stronger solution, shorter development should increase the contrast, shouldn't it? But which ingredients should I increase and how much should I cut the developing time by?
I think I will shoot a selection of classic cameras and develop it this way as a project for Fine Art America. Maybe someone will give me some money for them  _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 9:25 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 9:25 am Sujet du message: |
|
|
GrahamNR17 wrote:
You're right about the silver. A decade or so ago everyone reduced it. Plus-X went from my favourite film to just "it's ok", ditto Tri-X.
You might like Foma. Traditional, old-fashioned thick emulsion. Gives beautiful images in the right soup. |
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mer Jan 18, 2012 9:51 am Sujet du message: |
|
 Posté: Mer Jan 18, 2012 9:51 am Sujet du message: |
|
|
PaulC wrote:
Yes, I like Fomapan. In fact, I was so impressed with the results from my Leica that I've now got 25 rolls of the stuff in ISO 100 and 200 sitting in the fridge. I'm not so happy with the contrast on 4x5 film sheets, though.
It's a shame if they spoiled the films by cutting the silver. I saw a chemical engineer discussing in a forum the amount of silver in film and it is ridiculously low. One gram per square meter I think he said. That is less than US10c per film. I doubt if anybody would have quibbled about paying 10c or 15c more per roll. _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 1:00 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 1:00 pm Sujet du message: |
|
|
GrahamNR17 wrote:
| PaulC a écrit: |
| Yes, I like Fomapan. In fact, I was so impressed with the results from my Leica that I've now got 25 rolls of the stuff in ISO 100 and 200 sitting in the fridge. I'm not so happy with the contrast on 4x5 film sheets, though. |
Have you tried any of the two-bath soups for sheet films? I'd love to get back into big stuff again. Maybe next year...
| PaulC a écrit: |
| It's a shame if they spoiled the films by cutting the silver. I saw a chemical engineer discussing in a forum the amount of silver in film and it is ridiculously low. One gram per square meter I think he said. That is less than US10c per film. I doubt if anybody would have quibbled about paying 10c or 15c more per roll. |
Exactly. It's not like they weren't passing the cost on. Maybe they wanted to keep the price static, but make the extra few cents per roll. Either way, we lost out  |
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Mer Jan 18, 2012 2:05 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 2:05 pm Sujet du message: |
|
|
PaulC wrote:
| GrahamNR17 a écrit: |
| Have you tried any of the two-bath soups for sheet films? I'd love to get back into big stuff again. Maybe next year... |
I've only used the Foma developers so far. I'm just feeling my way in large format. It's made a lot more difficult by doing everything in a changing bag and a Patterson tank. It is very difficult to avoid scratching the film, I think it would be much easier if I could load/unload it in an open space.
I'll have to look into two-bath development to see what the advantages are... can it even be done in a single tank? _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 2:10 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 2:10 pm Sujet du message: |
|
|
GrahamNR17 wrote:
| PaulC a écrit: |
| I'll have to look into two-bath development to see what the advantages are... can it even be done in a single tank? |
Yep, tank is fine for two-bath. Many two-baths are fairly panthermic, so temperature variation within certain limits is acceptable.
For scenes with a wide tonal range, such is interiors with windows, bright sunny days with deep shadows etc, give Stoeckler a try, or Barry Thornton's variant. It's beautiful stuff in those situations. And shelf life of the two baths is in months/years. Foma loves the stuff. |
|
| Haut de page |
|
 |
martinsmith99
 Inscrit le: 31 Août 2008 Messages: 7029 Localisation: S Glos, UK
Expire: 2013-11-18
|
 Posté: Mer Jan 18, 2012 6:08 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 6:08 pm Sujet du message: |
|
|
martinsmith99 wrote:
I had intended trying out the coffee method, but after reading this, I'll stick with Rodinal; now there's a good developer IMO. _________________ Casual attendance these days |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 6:19 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 6:19 pm Sujet du message: |
|
|
GrahamNR17 wrote:
| martinsmith99 a écrit: |
| I had intended trying out the coffee method, but after reading this, I'll stick with Rodinal; now there's a good developer IMO. |
It's ok for large format, and to a certain extend medium format, but not sure I'd use it on small film. The grain is just downright intrusive  |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Mer Jan 18, 2012 7:26 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 7:26 pm Sujet du message: |
|
|
Attila wrote:
How about to sending to you any kind of developer by a member ? If I can help I can buy here what would like to have and send it to you. |
|
| Haut de page |
|
 |
GrahamNR17
 Inscrit le: 17 Jan 2009 Messages: 1855 Localisation: Norfolk, UK
Expire: 2012-09-06
|
 Posté: Mer Jan 18, 2012 7:32 pm Sujet du message: |
|
 Posté: Mer Jan 18, 2012 7:32 pm Sujet du message: |
|
|
GrahamNR17 wrote:
...just been trawling your Shutterstock stuff, Paul. You've some really cracking stuff in there  |
|
| Haut de page |
|
 |
erkie
 Inscrit le: 08 Oct 2011 Messages: 308 Localisation: Missouri
|
 Posté: Jeu Jan 19, 2012 12:04 am Sujet du message: |
|
 Posté: Jeu Jan 19, 2012 12:04 am Sujet du message: |
|
|
erkie wrote:
Actually with the lower ph versions of caffenol the grain is less intrusive than rodinal but the tones fall differently at the same exposures. I don't mind the tabular grained emulsions in coffee but I prefer my adox/efke in rodinal or better still some good old Beutler A+B. _________________
I shoot film and meter with digital
Asahi H3v, Praktica FX3, Retina IIa, Spotmatic sp1000, Fujica V2, Yashica lynx5000, Pentax Sf1, Minolta SRT102, Minolta7000i, Pentax MX, Pentax ME, Pentax Kx
lensesM42- Isco Gottingen Westanar 50/2.8, Isco Gottingen Westron 35/2.8, Rikenon 35/2.8, Spiratone Tc 105/2.5, Spiratone Tc 200/4.5, Sankyo Kohki Komura 300/5, Sankyo Kohki Komura 135/3.5, Auto Tak 35/3.5, Super Tak 150/4, S-M-C Tak 50/1.4, S-M-C Tak 28/3.5, SMC Tak 55/2, Mamya Sekor 55/1.8
K- mount- Helios 44-K-4, Jc penny 28/2.8, Da 18-55, Da 55-300, Pentax F 35-70, SMCP M 50/1.4, SMCP M 50/1.7
|
|
| Haut de page |
|
 |
PaulC
 Inscrit le: 23 Déc 2008 Messages: 2318
|
 Posté: Jeu Jan 19, 2012 8:52 am Sujet du message: |
|
 Posté: Jeu Jan 19, 2012 8:52 am Sujet du message: |
|
|
PaulC wrote:
OK, thanks. I just looked it up and I think I can order those chemicals online (though the customs people go a bit funny when white powders arrive). _________________ View or buy my photos at:
http://shutterstock.com/g/paulcowan |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|