| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
aspen
 Inscrit le: 15 Déc 2010 Messages: 307 Localisation: Maryland, USA
Expire: 2014-02-20
|
 Posté: Dim Fév 19, 2012 12:17 am Sujet du message: Konica FS-1 trouble |
|
 Posté: Dim Fév 19, 2012 12:17 am Sujet du message: Konica FS-1 trouble |
|
|
aspen wrote:
I have this camera, and it is, by external appearance, in excellent condition. However, the battery chamber had old AA batteries still in it. I removed them and found a small amount of corrosion. Not having any sandpaper, I used a sharp knife and scraped as much as possible. I can't remember the chemical concoction one should use. I know on car batteries that baking soda and 7-up does the trick. But, the terminals are somewhat shiny, and it wasn't a disaster, at all. I put new batteries in, and followed the manuals instructions, but nothing happens. No power. Could the internals be fried, or do I need to do more to clean the battery compartment, or is there a nuance that I am missing? Thanks for your help. I'd love to get this working.
also* the serial number begins with 383, so it is supposedly the group which the electrical problems were resolved
http://www.buhla.de/Foto/Konica/eFS-1Haupt.html
http://butkus.org/chinon/konica/konica_fs-1/konica_fs-1.htm _________________ Cameras; Sony Nex5n Lenses; Konica Hexanons; 21mm f2.8, 40mm f1,8, 50mm f1.4, 50mmf1.7,57mm f1.4, 100mm f2.8, 135mm f3.2, 200mm f4, MC Helios 77M-4 50mm f1.8, Jupiter 8 50 f2, Super Takumar 85mm f1.9, Vivitar Series 1 90mm f2.5 (Macro), Steinheil Munchen Culminar 85mm f2.8, Steinheil Munchen Exagon 35mm f2.8, Jupiter 37A 135mm, Astra Berlin 135mm f3.5, Angenieux 180mm f4 , Tair 3-PhS 300mm f4.5 |
|
| Haut de page |
|
 |
dof
 Inscrit le: 04 Fév 2009 Messages: 339 Localisation: Southern California
|
 Posté: Dim Fév 19, 2012 3:46 am Sujet du message: |
|
 Posté: Dim Fév 19, 2012 3:46 am Sujet du message: |
|
|
dof wrote:
I soak in vinegar and then in rubbing alcohol. That usually does the trick. If any corrosion left I use a scratch brush or, if severe, I grind it off with a dremel tool. |
|
| Haut de page |
|
 |
eddieitman
 Inscrit le: 12 Avr 2011 Messages: 1246 Localisation: United Kingdom
|
 Posté: Dim Fév 19, 2012 8:32 am Sujet du message: |
|
 Posté: Dim Fév 19, 2012 8:32 am Sujet du message: |
|
|
eddieitman wrote:
Also check the type of batteries being used make sure that they are alkaline' etc as theses things wont power on with cheap £land batteries _________________ My web site www.digital-darkroom.weebly.com
Life is like a camera. Focus on what's important, capture the good times, develop from the negatives and if things don't work out, just take another shot. |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Dim Fév 19, 2012 12:13 pm Sujet du message: |
|
 Posté: Dim Fév 19, 2012 12:13 pm Sujet du message: |
|
|
Attila wrote:
| dof a écrit: |
| I soak in vinegar and then in rubbing alcohol. That usually does the trick. If any corrosion left I use a scratch brush or, if severe, I grind it off with a dremel tool. |
+1 if not power up after your camera is dead. Motor driven Konicas a real gamble, many of them dead, lightmeter not works or works but expose on one speed etc. Electronic built quality is real crap, hard to find working one. Try Konica FC-1 they are much more trustworthy and only motor drive what you miss. |
|
| Haut de page |
|
 |
aspen
 Inscrit le: 15 Déc 2010 Messages: 307 Localisation: Maryland, USA
Expire: 2014-02-20
|
 Posté: Dim Fév 19, 2012 6:03 pm Sujet du message: |
|
 Posté: Dim Fév 19, 2012 6:03 pm Sujet du message: |
|
|
aspen wrote:
| Attila a écrit: |
| dof a écrit: |
| I soak in vinegar and then in rubbing alcohol. That usually does the trick. If any corrosion left I use a scratch brush or, if severe, I grind it off with a dremel tool. |
+1 if not power up after your camera is dead. Motor driven Konicas a real gamble, many of them dead, lightmeter not works or works but expose on one speed etc. Electronic built quality is real crap, hard to find working one. Try Konica FC-1 they are much more trustworthy and only motor drive what you miss. |
Thanks Eddie, and Attila.
I cleaned the battery compartment thoroughly; it looks shiny and new. The batteries are alkaline, and I put them in the right way But it doesn't work. It is a shame, I think. I've never used an electric, nor desired to use one in the past, but this one felt nice in the hand, and it is a Konica, which I hold with esteem. Attila, it is nice to know about the difference with the FC-1. I won't necessarily avoid either of them in the future, because the glass that it often attached is the primary reason for purchasing. I like the mechanical cameras best of all; the simpler the better, I think.
Attila, I know we have a "Market Place", but do we have a "Scrap Heap"? I would hate to just throw this away. _________________ Cameras; Sony Nex5n Lenses; Konica Hexanons; 21mm f2.8, 40mm f1,8, 50mm f1.4, 50mmf1.7,57mm f1.4, 100mm f2.8, 135mm f3.2, 200mm f4, MC Helios 77M-4 50mm f1.8, Jupiter 8 50 f2, Super Takumar 85mm f1.9, Vivitar Series 1 90mm f2.5 (Macro), Steinheil Munchen Culminar 85mm f2.8, Steinheil Munchen Exagon 35mm f2.8, Jupiter 37A 135mm, Astra Berlin 135mm f3.5, Angenieux 180mm f4 , Tair 3-PhS 300mm f4.5 |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Dim Fév 19, 2012 6:40 pm Sujet du message: |
|
 Posté: Dim Fév 19, 2012 6:40 pm Sujet du message: |
|
|
Attila wrote:
Put into Marketplace and say camera is give away , free need to pay only shipping cost. |
|
| Haut de page |
|
 |
Katastrofo
 Inscrit le: 26 Fév 2007 Messages: 10405 Localisation: USA
Expire: 2013-11-19
|
 Posté: Dim Fév 19, 2012 7:22 pm Sujet du message: |
|
 Posté: Dim Fév 19, 2012 7:22 pm Sujet du message: |
|
|
Katastrofo wrote:
Konica T4 + handheld meter= always working  |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|