MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Fd adapter for Canon fd 24mm f/2.8
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi all,
I have just bought a 24mm 2.8 to use through adapter on my 5d2 and e-pl2;
I have used many other fd lenses before with my adapters but this 24mm doesn't want to open or close the diaphragm.
If I move the rear lever diaphragm moves, but when I mount it on the camera it doesn't want to and stays wide open.
Any help?
maybe my adapters fit an older kind of fd lens? (This 24mm seems a bit younger then my 50mm and 100mm).


Reply

There is a small pin inside the micro 4/3 adapter which pulls the fd lens rear lever back when the lock-unlock ring is maneuvered.
Well, this pin seems to bee too short to keep the lever back; that's why the diaphragm doesn't respond properly.
The other fd lenses work perfectly with this adapter though.


Reply

Is your "problem" lens the sort with the chrome breech-locking ring? If so, it's easy to disable the auto iris mechnism by pushing one of the levers to one side. If not, then try http://www.youtube.com/watch?v=N0JczOo9OHg


Reply

scsambrook a écrit:
Is your "problem" lens the sort with the chrome breech-locking ring? If so, it's easy to disable the auto iris mechnism by pushing one of the levers to one side. If not, then try http://www.youtube.com/watch?v=N0JczOo9OHg


Thanks a lot scsam!