MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

DIY light box
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Looking for a more professional look for my camera pictures, I'be built a light box:



Three halogen lamps, a cardboard box, some translucent paper and cello tape, give this result:



Open to suggestions for improvement, the front lighting doesn't please me.

Jes.


Reply

Need more white background it will looking better


Reply

Attila a écrit:
Need more white background it will looking better


Hi Attila, What do you mean?. Do you mean the background ahould be whiter, or that I should put a bigger background?.
I'm afraid I built it too small, but I've got no place to put a bigger one...

Jes.


Reply

Perhaps more stronger light need, camera will looking better if background is perfect white not gray than now.


Reply

I thought this , but without loosing the camera Smile


Reply

I suggest removing one of the two upper lamps, and placing it instead behind the object, to lighten the edges and provide spacial separation from the background.
The side lamp should be less lateral and more of 3/4ers

Also I think that a higher POV for the shooting camera would be aesthetically desireable, unless you want to scientifically document the sole front of the object.

I hope not to sound too critical, in fact you have done an excellent job which has surely saved you $$$ !

-


Reply

Attila a écrit:
Perhaps more stronger light need, camera will looking better if background is perfect white not gray than now.


Yo're right, I've to put some more light on the background.
Thanks!


Jes.


Reply

Attila a écrit:
Perhaps more stronger light need, camera will looking better if background is perfect white not gray than now.


Yo're right, I've to put some more light on the background.
Thanks!


Jes.


Reply

Orio a écrit:
I suggest removing one of the two upper lamps, and placing it instead behind the object, to lighten the edges and provide spacial separation from the background.
The side lamp should be less lateral and more of 3/4ers

Also I think that a higher POV for the shooting camera would be aesthetically desireable, unless you want to scientifically document the sole front of the object.

I hope not to sound too critical, in fact you have done an excellent job which has surely saved you $$$ !

-


Hi Orio, thanks for the feedback. I was critical with this, the results are not what I expected, so I appreciate any comments Smile.
I'll play with stronger light and relocating the source of light.
Thanks to both of tyou!.

Jes.