| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
roby02091987
Inscrit le: 15 Juin 2012 Messages: 9
|
 Posté: Ven Juin 15, 2012 6:07 pm Sujet du message: Helios 44M-4 where to find a screw |
|
 Posté: Ven Juin 15, 2012 6:07 pm Sujet du message: Helios 44M-4 where to find a screw |
|
|
roby02091987 wrote:
Hello everybody!
I've just registered to this forum and I already need your help.
I've recently disassembled my helios 44m-4 in order to let it focus to infinity on my nikon camera. Reassembling it, i've lost one of the four mini-screws that hold in place the m42 screw mount.
Three screws are enough to keep it tightly in position, but i'd like to replace that missing screw, and here is the problem: where can i find such a small screw?
For your information, the screw is 3mm long and 1,5-1,6mm "wide".
Thank you all in advance for all the help
P.S. sorry for my english, i hope everything is understandable. |
|
| Haut de page |
|
 |
tromboads
 Inscrit le: 29 Mai 2012 Messages: 1695 Localisation: Melbourne AU
Expire: 2015-10-01
|
 Posté: Dim Juin 17, 2012 6:14 am Sujet du message: |
|
 Posté: Dim Juin 17, 2012 6:14 am Sujet du message: |
|
|
tromboads wrote:
surly any decent hardware store would sort you out? There is nothing to exotic about the screws used. At mega worst, if its a smige thicker it will re cut the die when you screw it in anyway. |
|
| Haut de page |
|
 |
thundertwin72
Inscrit le: 28 Sep 2011 Messages: 43 Localisation: Barcelona
Expire: 2013-12-16
|
 Posté: Dim Juin 17, 2012 7:24 am Sujet du message: Re: Helios 44M-4 where to find a screw |
|
 Posté: Dim Juin 17, 2012 7:24 am Sujet du message: Re: Helios 44M-4 where to find a screw |
|
|
thundertwin72 wrote:
| roby02091987 a écrit: |
the screw is 3mm long and 1,5-1,6mm "wide". |
Hi
Perhaps this is what you're looking.
| roby02091987 a écrit: |
P.S. sorry for my english, i hope everything is understandable. |
My English is Google Translator
 _________________
DSLR: Canon 50D, Canon 1000D.
EVIL: Olympus e-pl1, Fuji X-E1.
SLR: Fujica ST801, Praktica MTL5B, Praktica MTL50, Pentax MX, Pentax ME Super, Pentax K1000, Canon A1, Canon AE1 Program, Canon T60, Canon EF, Canon FTb QL, Minolta SRT-101, Minolta XG9, Nikon FE2, Nikon FM2n, Nikon FM, Nikon FE, Nikon FA, Olympus OM-1, Olympus OM-10, Yashica FX-3, Yashica FX-3 Super 2000, Contax 137MA Quartz, Contax RTS, Zenit E, Zenit EM, Зенит ET, Contaflex II, Contaflex IV, Киев 60 TTL.
Rangefinder: ФЗД-2, Зоркий-4, Киев-4.
Rangefinder fixed lens: Yashica Electro GSN, Yashica Electro GX, Yashica Minister D, Yashica Lynx 14E, Yashica Lynx 5000E, Canonet QL17, Olympus 35RC.
TLR: Flexaret II Flexaret IIa, Flexaret IIIa, Flexaret IV, Flexaret IVa, Flexaret Va, Flexaret VI Automat, Flexaret VIa Automat, Flexaret Standard, Flexaret VII Automat, Weltaflex, Rolleicord Va, Yashica Mat 124G.
LENSES:
(m42): Chinon 2.5/24, Super Takumar 3.5/28, Pentacon 2.8/29, Pentacon 3.5/30, Chinon Auto 2.8/35, Super Takumar 1.4/50, SMC Takumar 1.4/50,EBC Fujinon 1.4/50, Pentacon 1.8/50, EBC Fujinon 1.8/55, Helios 44-2 2/58, Helios 44M 2/58, Helios-44M4 2/58, Vivitar Series 1 2.5/90, Pentacon 2.8/135, CZJ Sonnar 3.5/135, MC Юпитер-37AM 3.5/135, Kenlock 4/200, Jupiter-21M 4.5/200.
(PK): SMC Pentax-M 1.4/50, SMC Pentax-M 1.7/50, SMC Pentax-A 1.7/50, Kiron 2.8/105.
(C/Y): Yashica ML 1.9/50, Yashica ML 1.7/50, Vivitar 2.8/28, Panagor 2.8/90, Zeiss Planar *T 1.4/50, Zeiss Planar *T 1.7/50.
(FD): Soligor 2.5/28, Canon FD 1.4/50, Canon FD 1.4/50 SSC, Canon FDn 1.4/50, Canon FD 1.8/50 SC, Canon FDn 1.8/50, Vivitar 2.8/55.
(MD): Rokkor PF 1.7/50, Rokkor MD 1.7/50.
(F): Nikkor AI-S 2/35, Nikkor AI 2.8/35, Nikkor AI 1.4/50, Nikkor AI-S 1.4/50, Nikkor AI-S 1.8/50 "Long Nose", Nikkor AI-S 1.8/50, E Series 1.8/50, Nikkor AI 2/50, МС Гелиос-81Н 2/50, Panagor 3/55, Hoya 2.8/135, Hoya 3.5/35-105.
(OM): Zuiko Auto-S 1.8/50.
(Konica AR):Hexanon 1.8/40.
(Pentacon Six): MC Волна-3 2.8/80.
(LTM): Юпитер-8 2/50, И-26м 2,8/52.
(Contax/Kiev): Юпитер-8М f2/5cm.
|
|
| Haut de page |
|
 |
roby02091987
Inscrit le: 15 Juin 2012 Messages: 9
|
 Posté: Mar Juin 19, 2012 6:28 pm Sujet du message: Re: Helios 44M-4 where to find a screw |
|
 Posté: Mar Juin 19, 2012 6:28 pm Sujet du message: Re: Helios 44M-4 where to find a screw |
|
|
roby02091987 wrote:
| tromboads a écrit: |
| surly any decent hardware store would sort you out? There is nothing to exotic about the screws used. At mega worst, if its a smige thicker it will re cut the die when you screw it in anyway. |
Thanks for the answer, but in hardware stores they only have screws way larger than i need...
| thundertwin72 a écrit: |
Hi
Perhaps this is what you're looking.
| roby02091987 a écrit: |
P.S. sorry for my english, i hope everything is understandable. |
My English is Google Translator
 |
Thanks, but the head of the screw is different from mine.
The screw i'm looking for is:
M1.6
Pitch 0,4 mm
Countersunk head
3,2mm long
3mm head diameter
Possibily black and slotted. |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Mar Juin 19, 2012 8:42 pm Sujet du message: |
|
 Posté: Mar Juin 19, 2012 8:42 pm Sujet du message: |
|
|
Lloydy wrote:
I have a box of screws from dead cameras and lenses, and a Helios, so I'll have a look. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
roby02091987
Inscrit le: 15 Juin 2012 Messages: 9
|
 Posté: Mer Juin 20, 2012 8:06 am Sujet du message: |
|
 Posté: Mer Juin 20, 2012 8:06 am Sujet du message: |
|
|
roby02091987 wrote:
| Lloydy a écrit: |
| I have a box of screws from dead cameras and lenses, and a Helios, so I'll have a look. |
awesome, thanks a lot!!!  |
|
| Haut de page |
|
 |
caerwall
 Inscrit le: 11 Nov 2010 Messages: 51
|
 Posté: Jeu Juin 21, 2012 12:52 am Sujet du message: Little screws big problem |
|
 Posté: Jeu Juin 21, 2012 12:52 am Sujet du message: Little screws big problem |
|
|
caerwall wrote:
I had a similar problem with an internal screw in a Jupiter-3
Tiny little flea-like things and jump about just about as much, and they are all different.
Taking all the usual precautions with trays and things it is still possible for them to bounce on to the floor. I have even managed to find some from the floor. But the best way is too simply contain them in a little plastic box as they are removed. A stacking set pill container size will keep them in order of removal. The best maxim is "don't lose them".
My lost screw remain lost, hardware store screws are completely useless, even a helpful watch repair shop came up with a bunch of watch screws in a "left overs" box but none of them were useful for what I needed.
Common wisdom is to buy a few old "dead" lenses and cannibalise them for screws. But even then there are so many screw types and unless you get a lens that is otherwise identical it is still hard to get the exact same one that you are looking for.
You cannot "cut a new thread" easily as the material is often soft and what you are effectively doing is driving a wrecking bar into the slot. Might work though.
Someone must have made the original screws and my present thought passes from imaginations of someone tending a mini-screw manufacturing lathe to perhaps hand dies and making screws from suitable wire stock on demand. Flattening the head with a small hammer if necessary before cutting a slot is the least problem.
This leaves the questions that I must ask - where can a suitable set of hand dies be found? How do you cut the appropriate size slots in the end of the "new screw" to fit your screwdriver" Finding suitable size wire stock itself would be hard enough but must be easy compared to the answers to the first two questions.
I am sure that there will be many quite interested in setting up their own little screw manufacturing works including myself.
Tom |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Jeu Juin 21, 2012 7:34 am Sujet du message: |
|
 Posté: Jeu Juin 21, 2012 7:34 am Sujet du message: |
|
|
Lloydy wrote:
Sorry, I had no luck in finding a screw. But I'll keep looking.
As for making screws of this sort, I spent a few years working on quality control at a company making time clocks and parking meters. In those days the company made all it's own components including the tiny screws. Down to about 1mm they were made on automatic lathes, and under that size they were rolled. It was a nightmare for the quality control guys, some of these machines were making 2 screws a second so if you couldn't get around all the machines for an hour or two there could be a lot of scrap.
But that was back in the 1970's, today modern CNC machines have revolutionized this kind of manufacturing which is why this sort of product is made so cheaply and accurately, whether the cheapness is passed on to the consumer is another matter, as is finding the screw you want ! _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
roby02091987
Inscrit le: 15 Juin 2012 Messages: 9
|
 Posté: Ven Juin 22, 2012 9:49 am Sujet du message: |
|
 Posté: Ven Juin 22, 2012 9:49 am Sujet du message: |
|
|
roby02091987 wrote:
| Lloydy a écrit: |
Sorry, I had no luck in finding a screw. But I'll keep looking.
As for making screws of this sort, I spent a few years working on quality control at a company making time clocks and parking meters. In those days the company made all it's own components including the tiny screws. Down to about 1mm they were made on automatic lathes, and under that size they were rolled. It was a nightmare for the quality control guys, some of these machines were making 2 screws a second so if you couldn't get around all the machines for an hour or two there could be a lot of scrap.
But that was back in the 1970's, today modern CNC machines have revolutionized this kind of manufacturing which is why this sort of product is made so cheaply and accurately, whether the cheapness is passed on to the consumer is another matter, as is finding the screw you want ! |
Thank you a lot, again .
About the screw... i think i'll try to look for some unusable lenses for few bucks and take the screws from them... or maybe i'm trying to ask to someone who repairs lens, cameras and similar stuff (at the moment i can't remember the correct term in english, sorry ). |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|