MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Quick digitize slide
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I have light table to examine slides I thought worth to try to make a quick shoot with NEX + 30-70 Olympus zoom lens and if promising I will build a better equipment on this scheme.

Slide is 6x4,5cm size.



#1

#2


Reply

That is quite impressive.

I wonder what could be doe with a slide copier/bellows arrange for digitizing 35mm?


Reply

Or...one of those 'flat field' copying lenses?


Reply

iangreenhalgh1 a écrit:
That is quite impressive.

I wonder what could be doe with a slide copier/bellows arrange for digitizing 35mm?


There is some information here.


Reply

I like this idea a lot, how much light does the light table emit, is it enough for low ISO and fast shutter speed?


Reply

lauge a écrit:
I like this idea a lot, how much light does the light table emit, is it enough for low ISO and fast shutter speed?


I did use F16 ISO200 and 1/3 shutter speed on tripod so allow it.


Reply

i also have a small light table (a4 size) and i've tried to use it as a backlight for scanning 6x6 negatives with my flatbed scanner and found that i had to put the light table at different distances depending on how well the negatives were originally exposed. if the negative was light scan was overblown if the light table was too close to the negative. with darker negatives light table had to be closer to the negative


Reply

lauge a écrit:
iangreenhalgh1 a écrit:
That is quite impressive.

I wonder what could be doe with a slide copier/bellows arrange for digitizing 35mm?


There is some information here.


Cheers Lauge, that is an excellent result. I have a Rodagon 80mm and some M39 bellows, just need to find a slide copier attachment.