MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

My darkbag has arrived. Now how do I patch pinholes?
Voir le sujet précédent :: Voir le sujet suivant  


Reply

My kit is coming together but until I patch the pinholes (found 2) I'm at a standstill. The pinholes are at the corner of the bellows where the sections are all bunched up. What do you use to do it? I'd prefer not using tape. This is not a leather bellows but something else.


Reply

I've used black automotive silicone goop, I see some have used black fabric paint.

I bought some of this - it's meant for cameras like yours and works well.

http://www.equinoxphotographic.com/bellows.htm


Reply

Nesster a écrit:
I've used black automotive silicone goop, I see some have used black fabric paint.

I bought some of this - it's meant for cameras like yours and works well.

http://www.equinoxphotographic.com/bellows.htm

+1


Reply

I cannot see what the product is?


Reply

equinox has a very bad web site... the bellows patch compound is here:
http://www.equinoxphotographic.com/large.htm
in the film holders, adapters and packs section Rolling Eyes


Reply

I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


Reply

Farside a écrit:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


Reply

Nesster a écrit:
equinox has a very bad web site... the bellows patch compound is here:
http://www.equinoxphotographic.com/large.htm
in the film holders, adapters and packs section Rolling Eyes


email sent. Thanks my friend!


Reply

Big Dawg a écrit:
Farside a écrit:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


PVA glue mixed with black poster paint at a 1 to 1 ratio. K.


Reply

womble a écrit:
Big Dawg a écrit:
Farside a écrit:
I had great success on the 9x12 fabric focal plane shutter of my Ihagee by mixing acrylic black poster paint with PVA 50/50, painting it on and letting it dry. That was 3 years ago and it's still lighttight.


What is PVA 50/50?


PVA glue mixed with black poster paint at a 1 to 1 ratio. K.


Answers my question. Thanks!

Here a more common name is Elmer's glue not polyvinyl acetate.