| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
CuriousOne
 Inscrit le: 31 Déc 2013 Messages: 681 Localisation: Home
|
 Posté: Mar Mar 18, 2014 7:12 pm Sujet du message: Stay away from petri lenses! |
|
 Posté: Mar Mar 18, 2014 7:12 pm Sujet du message: Stay away from petri lenses! |
|
|
CuriousOne wrote:
I know that there's a topic for "uncleanable" lens, but I decided to post a separate one for Petri (bayonet mount) lenses. They often appear for attractive price, and based on their register distance, they, besides mirrorless cameras, also can be adapted to Canon or Sony DSLRs. However, since these lenses are old, they often have fungus, dust or other problems, that you might think that can be easilly fixed. I bet you not.
Almost all treads and external screws are fixed with some kind of very stubborn glue. It is so strong, I was not able to soften it by submerging into acetone for 24 hours! Also, it holds things so strong, that I've broken two screwdrivers (non cheap, WIHA ones) while trying to unscrew such glued lens. The only way of softening that glue was to subject it to fumes of boiling NSF Primer for PVC pipes (NEVER try this, 99.99% chances of fire and 99% of lethal outcome, unless you have very well equipped chemical lab). Logical conclusion of using such strong solved was the fact, that not only glue, but all labels ant painted surfaces were gone.
Certain parts/lens assemblies are finished by pressing, so it is not possible to separate them without damage, and be sure, fungus grows exactly inside them.
This experience is based on about 10 Petri lenses, both fixed and zoom. Only one, easily to clean and adapt petri lens was Petri 2X teleconverter, because it appears to be made by same plant, which was manufacturing Vivitar 2X-1 teleconverter. _________________ I have nothing to compensate with lens |
|
| Haut de page |
|
 |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Mar Mar 18, 2014 7:52 pm Sujet du message: Re: Stay away from petri lenses! |
|
 Posté: Mar Mar 18, 2014 7:52 pm Sujet du message: Re: Stay away from petri lenses! |
|
|
guardian wrote:
| CuriousOne a écrit: |
I know that there's a topic for "uncleanable" lens, but I decided to post a separate one for Petri (bayonet mount) lenses. They often appear for attractive price, and based on their register distance, they, besides mirrorless cameras, also can be adapted to Canon or Sony DSLRs. However, since these lenses are old, they often have fungus, dust or other problems, that you might think that can be easilly fixed. I bet you not.
Almost all treads and external screws are fixed with some kind of very stubborn glue. It is so strong, I was not able to soften it by submerging into acetone for 24 hours! Also, it holds things so strong, that I've broken two screwdrivers (non cheap, WIHA ones) while trying to unscrew such glued lens. The only way of softening that glue was to subject it to fumes of boiling NSF Primer for PVC pipes (NEVER try this, 99.99% chances of fire and 99% of lethal outcome, unless you have very well equipped chemical lab). Logical conclusion of using such strong solved was the fact, that not only glue, but all labels ant painted surfaces were gone.
Certain parts/lens assemblies are finished by pressing, so it is not possible to separate them without damage, and be sure, fungus grows exactly inside them.
This experience is based on about 10 Petri lenses, both fixed and zoom. Only one, easily to clean and adapt petri lens was Petri 2X teleconverter, because it appears to be made by same plant, which was manufacturing Vivitar 2X-1 teleconverter. |
Thank you for an interesting and valuable post. But could you clarify, please, the point about "bayonet mount".
Petri lenses were made in two different mount styles, in addition to the m42 screw mount Petris. There is the Petri proprietary breech lock mount, and (later) the PK mount, which is pure bayonet. I assume the lenses which gave you trouble had the Petri breech-lock mount. Most Petri lenses have that mount. But just wanted to be sure so I'm asking.
Now in general:
In my view the greatest impediment to lens repair enjoyment and bliss is that so many lenses are glued together. And I, too, have tried to open lenses when even acetone would not soften the horrid, thread-locking, glue. It's enough to drive you crazy. It's enough to reduce grown men to tears. It sucks!!
(And I'm sorry you broke your tools. That really sucks!) |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Mar Mar 18, 2014 11:08 pm Sujet du message: |
|
 Posté: Mar Mar 18, 2014 11:08 pm Sujet du message: |
|
|
Lloydy wrote:
I like those little gas soldering irons, get them hot and put the tip on the screw, hold it there for maybe a minute. I haven't had a screw beat me yet. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Mer Mar 19, 2014 12:57 am Sujet du message: |
|
 Posté: Mer Mar 19, 2014 12:57 am Sujet du message: |
|
|
guardian wrote:
| Lloydy a écrit: |
| I like those little gas soldering irons, get them hot and put the tip on the screw, hold it there for maybe a minute. I haven't had a screw beat me yet. |
Well you make a good point and perhaps I did not read sufficiently closely and carefully. I agree with your take that screws most often can be freed, one way or another, even though thread lock was used. What give me fits is locked lens retainers and other situations where the thread lock is dispersed widely around and across a larger thread. Also, as the OP highlighted, acetone is not always able to "melt" the locking compound. The entire thing can quickly become a nightmare, depending on the brand of lens and the manufacturing approach used. |
|
| Haut de page |
|
 |
CuriousOne
 Inscrit le: 31 Déc 2013 Messages: 681 Localisation: Home
|
 Posté: Mer Mar 19, 2014 4:43 am Sujet du message: |
|
 Posté: Mer Mar 19, 2014 4:43 am Sujet du message: |
|
|
CuriousOne wrote:
Yes, by "bayonet" I meant petri breech lock lens.
So far, models taken down are:
80-200/4.5 (both big - with silver ring and "normal" ones)
200/4
55/2
35/2.8
2x teleconverter _________________ I have nothing to compensate with lens |
|
| Haut de page |
|
 |
Langstrum
 Inscrit le: 16 Fév 2014 Messages: 351
|
 Posté: Mer Mar 19, 2014 8:30 am Sujet du message: |
|
 Posté: Mer Mar 19, 2014 8:30 am Sujet du message: |
|
|
Langstrum wrote:
I don't think they glued them, maybe mainly because of time, some corrosion appeared. I heard from my friend that using a kind of anti-corrosion solution for several hours, we would be able to take out these screws.
I totally understand your frustration because I broke a screw driver and injured my hand once while I tried to unscrew the rear part of the SMC Pentax-M 50/1.7. I have two and both have the same problem.
Thank you for your information, now I have more reason to stay away from this brand. _________________
Camera: Sony A7 mark III, A6300
AF Lenses:
Canon EF 50/1.8; EF 200/2.8 L, EF 200/1.8 L, EF 300/4 L Sony E mount SEL 50/1.8 OSS, SEL 16/2.8 Fuji X mount XF 35/1.4 R
MF Lenses: Peleng MC 8/3.5, 17/2.8 Samyang 14/T3.1, 35/T1.5, TS 24/3.5 ED, 85/T1.5, Polar 85/1.4 Auto Revuenon 28/2.8; MC 50/1.4 Vega11U 50/2.8 Carl Zeiss Tessar 50/2.8 (exakta mount) Auto Chinon 50/1.9 Zenitar ME1 50/1.7 Sears Auto Sears 55/1.4; Sears 135/2.8 Auto Yashinon DX 50/1.4; Tomioka 50/1.2 SMC Pentax 50/1.7; 50/1.4 Canon FD 50/1.4 S.S.C; 55/1.2 S.S.C; FD 50/1.2 L; FD 85/1.2 L; 85/1.2 S.S.C Aspherical; FD 80-200/4 L 300/2.8 S.S.C Fluorite FD 300/2.8 L FD 200/1.8 LCosina-S 50/1.2 Helios Helios 44 Chrome f/22, 44-2, 44-3, 44M-4, 44M-7 (58/2), Helios-40 85/1.5 Jupiter Jupiter-9 85/2; Jupiter-37A 135/3.5; Jupiter-21M 200/4 Nikon Ai 105/2.5 Tairs-3S 300/4.5
Voigtlander 15/4.5 Aspherical; Ultron 35/1.7
|
|
| Haut de page |
|
 |
CuriousOne
 Inscrit le: 31 Déc 2013 Messages: 681 Localisation: Home
|
 Posté: Mer Mar 19, 2014 8:47 am Sujet du message: |
|
 Posté: Mer Mar 19, 2014 8:47 am Sujet du message: |
|
|
CuriousOne wrote:
No, they are glued. I'll took camera to workshop shortly and will take some photos. _________________ I have nothing to compensate with lens |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Mer Mar 19, 2014 11:00 am Sujet du message: |
|
 Posté: Mer Mar 19, 2014 11:00 am Sujet du message: |
|
|
Lloydy wrote:
[quote=" What give me fits is locked lens retainers and other situations where the thread lock is dispersed widely around and across a larger thread. [/quote]
That's murder to deal with, I took the elements out of a Tamron O1F X2 converter recently and the whole optic block is positioned by a fine thread and locking nut - which is all glued in place. It's guaranteed that once you've freed the damn thing it will never go back into the same place. Luckily, it was fungused and I was converting it to a tube, but dismantling it effectively wrecked any chance of it working again. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Mer Mar 19, 2014 12:05 pm Sujet du message: |
|
 Posté: Mer Mar 19, 2014 12:05 pm Sujet du message: |
|
|
guardian wrote:
| Langstrum a écrit: |
I don't think they glued them, maybe mainly because of time, some corrosion appeared. I heard from my friend that using a kind of anti-corrosion solution for several hours, we would be able to take out these screws.
I totally understand your frustration because I broke a screw driver and injured my hand once while I tried to unscrew the rear part of the SMC Pentax-M 50/1.7. I have two and both have the same problem.
Thank you for your information, now I have more reason to stay away from this brand. |
While not in disagreement with the OP, I take your point that corrosion oftentimes can be an issue where lens dismantling is concerned. The specific form I run into all too often, with both large and small items, is galvanic action over (perhaps) thirty or forty years. Galvanic action is, as the saying goes, "a bear and a spare".  |
|
| Haut de page |
|
 |
rbelyell
 Inscrit le: 13 Oct 2009 Messages: 4269 Localisation: somewhere in the mountains of central NY
Expire: 2014-01-31
|
 Posté: Mer Mar 19, 2014 12:21 pm Sujet du message: |
|
 Posté: Mer Mar 19, 2014 12:21 pm Sujet du message: |
|
|
rbelyell wrote:
personally, i see very little reason to buy lenses with fungus because often they cannot be cleaned to the point where they are perfectly restored. especially these type lenses that are cheap when in pristine condition.
while interesting, the post shouldnt be to avoid petri lenses. ive had many and for the price, they performed very well. in fact the kuribayashi line are imo very good indeed and a great value. the 135/3.5 is one of my favorites and the most compact 135 ive ever used or seen. imo the post heading is misleading and provides somewhat of a misapprehension. the fact (?) that one cannot remove fungus from a lens is no reason to warn everyone off those lenses in general. far from avoiding petri lenses, perhaps avoid buying lenses with known faults, faults which are no fault of petri. _________________ Epson RD1 + Elmarit 21/2.8; Summarit 50/1.5; Summarit 75/2.5; Elmar-c 90/4; Sankyo Komura 135/2.8, Hektor 135/4.5; Braun Paxina 29 6x6; Photax Boyer Paris; Holga 120 Pano
GREAT STUFF FOR SALE:
Contax T
Hasselblad XPan + 45/4, 90/4
Kodak Retina Reflex IV + full set of Schneider Krueznach lenses
Mercury 2 half frame 35mm
Kodak Pro slr/n
Fuji GM670+100/3.5+65/8!
Praktisix 6x6 medium format + ZeissBiometar 120/2.8
Bessa T 101 Anniversary Edition in Navy Blue
Mamiya Six Folder with Zuiko 75/3.5
Adaptall: Tamron SP 28-85 macro
Cameras: Canon IX
PM for more complete descriptions/pix. All in great shape!
_________________________
'buy me a drink, sing me a song,
take me as i come 'cause i can't stay long' |
|
| Haut de page |
|
 |
CuriousOne
 Inscrit le: 31 Déc 2013 Messages: 681 Localisation: Home
|
 Posté: Mer Mar 19, 2014 1:54 pm Sujet du message: |
|
 Posté: Mer Mar 19, 2014 1:54 pm Sujet du message: |
|
|
CuriousOne wrote:
Same lens had other, non-glued screws too, and no "galvanic action" occured in past 30-40 years in them for surprise.
Why should you buy lens with fungus? because it is bargain and cheap, and many people have spare time that they can spend on lens cleaning, rather than making some $$$
Regarding the image quality of petri lenses, I've compared above mentioned models with the Helioses, Rokkors and some low-end stuff such as Lumetar. Definetly nothing to write home about. I've found a limited use of 35/2.8 coupled with Petri 2x teleconverter for some special effect shots - it creates very interesting haze effect, hard to reproduce with special f/x filters or in software. _________________ I have nothing to compensate with lens |
|
| Haut de page |
|
 |
Mike Deep
 Inscrit le: 25 Oct 2008 Messages: 447 Localisation: Upstate New York
|
 Posté: Mer Mar 19, 2014 7:30 pm Sujet du message: |
|
 Posté: Mer Mar 19, 2014 7:30 pm Sujet du message: |
|
|
Mike Deep wrote:
| rbelyell a écrit: |
| personally, i see very little reason to buy lenses with fungus because often they cannot be cleaned to the point where they are perfectly restored. especially these type lenses that are cheap when in pristine condition. |
If the price is right (or even free), however, I'd definitely encourage people to pick them up for practice!
I came across a Nikkor 135/2.8 that looked like a goner, it was caked with dust and fungus. To my surprise, it cleaned up perfectly, and I had a chance to get some valuable hands-on experience with spanner wrenches. _________________ Mike Deep Photography
Olympus: 21/3.5, 24/2.8 MC, 50/2, 50/1.4 MC, 135/2.8 MC
Nikon: C 24/2.8, C 28/2, Ai-S 28/2.8, K 35/2, K 35/2.8, C 55/1.2, AI 85/2, P 105/2.5 (5/3), 105/2.5 (5/4), F 135/2.8, Ai-S 180/2.8, No. 5T
Pentax: M 50/1.4, Auto-Tak 55/2, SMC Tak 100/4
Vivitar: 50/1.4 (Cosina), S1 90/2.5 (Tokina), 2x Macro TC
Etc: Distagon 35/2.8, Yashica ML 50/1.4, CZJ Pancolar 50/2, Rollei-HFT Planar 50/1.8, Sears Auto 55mm f1.4, Canon FL 55/1.2, Tomioka Yashinon 55/1.2, Sigma 90/2.8, CZ Sonnar T* 135/2.8, Isco Gottingen 180/2.8 |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Mer Mar 19, 2014 10:14 pm Sujet du message: |
|
 Posté: Mer Mar 19, 2014 10:14 pm Sujet du message: |
|
|
iangreenhalgh1 wrote:
| rbelyell a écrit: |
personally, i see very little reason to buy lenses with fungus because often they cannot be cleaned to the point where they are perfectly restored. especially these type lenses that are cheap when in pristine condition.
while interesting, the post shouldnt be to avoid petri lenses. ive had many and for the price, they performed very well. in fact the kuribayashi line are imo very good indeed and a great value. the 135/3.5 is one of my favorites and the most compact 135 ive ever used or seen. imo the post heading is misleading and provides somewhat of a misapprehension. the fact (?) that one cannot remove fungus from a lens is no reason to warn everyone off those lenses in general. far from avoiding petri lenses, perhaps avoid buying lenses with known faults, faults which are no fault of petri. |
I must have bought 30 lenses with fungus, never had one that couldn't be cleaned. I've had some amazing bargains and only collectors care about perfectly restored condition, shooters know that a lens has to be damaged pretty badly before the IQ is noticeably affected. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
calvin83
 Inscrit le: 12 Avr 2009 Messages: 7740 Localisation: Hong Kong
|
 Posté: Dim Mar 23, 2014 3:07 pm Sujet du message: |
|
 Posté: Dim Mar 23, 2014 3:07 pm Sujet du message: |
|
|
calvin83 wrote:
You will not say this if you have try the Orikkor 50mm F2. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| Haut de page |
|
 |
philslizzy
 Inscrit le: 07 Août 2012 Messages: 4753 Localisation: Cheshire, England
|
 Posté: Lun Mar 24, 2014 12:47 am Sujet du message: |
|
 Posté: Lun Mar 24, 2014 12:47 am Sujet du message: |
|
|
philslizzy wrote:
| rbelyell a écrit: |
personally, i see very little reason to buy lenses with fungus because often they cannot be cleaned to the point where they are perfectly restored. especially these type lenses that are cheap when in pristine condition.
while interesting, the post shouldnt be to avoid petri lenses. ive had many and for the price, they performed very well. in fact the kuribayashi line are imo very good indeed and a great value. the 135/3.5 is one of my favorites and the most compact 135 ive ever used or seen. imo the post heading is misleading and provides somewhat of a misapprehension. the fact (?) that one cannot remove fungus from a lens is no reason to warn everyone off those lenses in general. far from avoiding petri lenses, perhaps avoid buying lenses with known faults, faults which are no fault of petri. |
Hear hear! _________________ Hero in the 'messin-with-cameras-for-the-hell-of-it department'. Official. |
|
| Haut de page |
|
 |
Gardener
 Inscrit le: 22 Sep 2013 Messages: 949 Localisation: USA
|
 Posté: Mer Avr 02, 2014 6:45 am Sujet du message: |
|
 Posté: Mer Avr 02, 2014 6:45 am Sujet du message: |
|
|
Gardener wrote:
| iangreenhalgh1 a écrit: |
| I must have bought 30 lenses with fungus, never had one that couldn't be cleaned. |
Fungus really does a number on Rokkor 58/1.4 coatings. |
|
| Haut de page |
|
 |
|
|