MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Grease for helicoid
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello, i have an 85 mm lens from Samyang and its focusing action is quite stiff at times. It depends on the direction the lens is facing, sometimes it can also be silky smooth.
So, i want to grease the helicoid again and i read that a teflon grease is a must here.
Now, i do have a tube of ptfe grease which i use for many of the working tools i have in my home and i guess i can use that for the helicoid. Am i right?


Dernière modification par ilguercio le Lun Oct 01, 2012 10:31 pm ; modifié 1 fois au total


Reply

It is important that it does not get too fluid with heat.


Reply

Orio a écrit:
It is important that it does not get too fluid with heat.

Well, i have been using it inside a rotating shaft so i guess it is pretty resistant to heat.
Since i have got the grease already i don't want to buy some on purpose.
Should i need to clean the old grease proprerly?


Reply

ilguercio a écrit:

Should i need to clean the old grease proprerly?


Yes (at least I heard that from a repair man)


Reply

Nice, it shouldn't be too difficult then. At least i have disassembly pictures of the procedure somewhere online.
http://www.flickr.com/photos/gigel/sets/72157626746203425/detail/


Reply

Orio a écrit:
It is important that it does not get too fluid with heat.

+1 + not too stiff when it's cold!
ilguercio a écrit:

Well, i have been using it inside a rotating shaft so i guess it is pretty resistant to heat.

When the sun is shining on a black lens in a car etc. it can get pretty warm. And when it get's too fluid it might leave the helicoid (which makes it stiff afterwards) or if you have bad luck go onto glas, blades etc. or make plastic parts porous etc.

[/quote]Should i need to clean the old grease proprerly?[/quote]
Generally yes. Take some isopropanol, bezine, petrolether etc. and a toothbruch/towel etc. (depends oon how dirty the helicoid is) and make it as clean as possible.

I'm using a ball bearing oil which works very well bye the way. RC car supply should also have the right oil.


Reply

To select perfect grease is not easy, best if you can find a shop with large scale of choices and prepare your self , not cheap.

Repair man who fix stuff to me selected a grease , which cost is 300 EUR /kg , if you are lucky shop sell not only in kg pack Smile


Reply

I've had some good results from a silicone lube, but I have no idea of what the specification is. All I know is that it is intended to lube the mechanical parts of electrical contacts and that it is thicker than something like an oil used for sewing machines - a light oil, and thinner than a light grease such as used for bicycle cranks and hubs.


Reply

I've already posted it in another thread but for the search-function it might be senseful to repost it here again:
http://forum.mflenses.com/anyone-skilled-in-rheology-t53245.html

Quote:
I'm using this ball bearing lubricant ("Hanseline Kugellager Abschmierfett") which works imho almost perfectly (useful viscosity, not volatile, long durability, not very temperature sensitive, very cheap (less than 2€ per 50g here)). According to the description from the producer it's made for temperatures between -30°C to +60°C, which would also fit for helicoids. I have it from a local store but you can also buy it from Ebay and several online stores at the moment.


It's based on a lithium stearate and it has "consistency class 2", so it should theoretically stiffer than most vaselines
I'm sure there are better ones, but it's cheap, reliable, safe and works much better than vaseline/silicone oil/oil for bycicle chains and other standart over-the-counter lubricants

Bye the way, I think that different lenses need different visosities for their lubricant. For example an old Elmar 50/3.5 has an very chunky helicoid while the Hexanon has a pretty filigree weird double-helicoid - I guess the Elmar would prefer a medium or even pretty stiff lubricant while the Hexanon would prefer a very smooth lubricant etc.. I already tried to relubricate the Hexanon with vaseline and it stayed pretty stiff, while viscosity-wise vaseline worked ok for most other lenses I relubricated before.


Reply

And i eventually did it.
The fact is that this lens doesn't focus around a helicoid but there is the focus ring and the barrel and no helix in behind.
So these two pieces simply revolve one on another in the simplest way. Now the focus is much smoother. I also put a tiny bit of grease between the internal barrel and the back glass group as well, just to make things flow better. I obviously did a bit of focusing before reassembling the lens just to clean the excess grease.
So, the procedure is not difficult and it took me an hour as i didn't mark the alignments and thus forcing me to make a bit of trial and error. If you need further explanations just ask. The grease seems to be good, it has an operating temperature of -25°C/+120°C so it should cope with the most furious focusing actions.