MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

APS film
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hello! I remember that in the '90es there were some fancy cameras issued with a new cartridge type . Does somebody still uses them ? The cameras are still available and some film also Where can the films be processed in Europe ? The main format is an interesting 16/9


Reply

its just like developing 35mm. everyone should be able to do it with notice beforehand. also, i have a canon IX i believe, a fully functioning APS cam using normal EF mount. i also have film and maybe even the owners manual. if you want i can dig them up for you.
tony


Reply

Processing available at some labs, I did try already three of them , Canon IXUS, Konica 24-48 zoom and Contax Tix.
result was disappointing due small frame scan require much better equipment what is usually available.
Contax Tix was nice other too was handy, but result was crap.
Film is available on Ebay.

http://www.mflenses.com/gallery/v/filmcamera/german/contax/contax_tix/?


Reply

The results I got, when I was shooting on APS, were disappointing.
But at that time I did not have a decent cam. Perhaps that's why. Wink


Reply

Scanning on a dedicated film scanner is compulsory , I'm shure , because of the small frame. Your samples don't look bad at all, Attila !


Reply

I decided to take a chance , just for fun and experiment .
I received a EOS IX wich is a GORGEOUS camera , all stainless steel body . For 25 $ with 5 films ! I'll shoot and report ,going to post here if I'll get useable results .


Reply

yinyangbt a écrit:
I decided to take a chance , just for fun and experiment .
I received a EOS IX wich is a GORGEOUS camera , all stainless steel body . For 25 $ with 5 films ! I'll shoot and report ,going to post here if I'll get useable results .

Look forward it! That camera is good to shoot even if not develop any film just use it Smile

My samples made with 'top' camera from Contax it is excellent indeed, Canon, Konica 24-48mm result was so crap I did not publish them just throw it out Embarassed


Reply

Attila a écrit:
yinyangbt a écrit:
I decided to take a chance , just for fun and experiment .
I received a EOS IX wich is a GORGEOUS camera , all stainless steel body . For 25 $ with 5 films ! I'll shoot and report ,going to post here if I'll get useable results .

Look forward it! That camera is good to shoot even if not develop any film just use it Smile

My samples made with 'top' camera from Contax it is excellent indeed, Canon, Konica 24-48mm result was so crap I did not publish them just throw it out Embarassed

I belive the system died too soon ,so the maturisation wasn't touched by the most part of the cameras (lens Quality wise) . The IX took advantage ( I hope) of the mature EOS Canon sistem of lenses .One can shoot it even with the best L glass !!! Laughing( Not me, I don't have any) Laughing And Contax Tix took advantage of ...Contax and CZ Sonnar T lenses! Never , but never heard of crap Contax Wink


Dernière modification par yinyangbt le Ven Oct 26, 2012 5:23 pm ; modifié 1 fois au total


Reply

I still have a very nice IXUS, the steel bodied version, that we used for many years and got many decent pictures from. I'll scan some if I remember.


Reply

Lloydy a écrit:
I still have a very nice IXUS, the steel bodied version, that we used for many years and got many decent pictures from. I'll scan some if I remember.

I've seen somewhere some promising scans from a L1 Canon 26mmf2.8


Reply

I've just dragged out a whole drawfull of APS pictures and had a very quick rummage through a few, and I have to say that I'm astonished at the quality of this tiny little Canon IXUS.

I've scanned a few from the prints, not the neg's, and haven't touched them at all except to resize. The panoramas, Death Valley, Monument Valley and Paris, are obviously a normal frame masked off in the camera, so they are going to be lower quality, but it still isn't bad. The 'Why go bald' picture I blew up to 200% and couldn't find any CA on the railings against the sky. The inside shot of the Kilmainham Gaol in Dublin was shot without flash, and shows excellent detail. The archway shot at Collins Barracks Military Museum in Dublin has massive contrast in the harsh sun, but again the detail is good and it handles the contrast well.
The three guys are my wifes Irish side of the family, her dad's the middle one and my major role model , all sadly gone now but it's a picture I didn't know I'd got, and so happy to find.













Different processors also printed at different sizes, as the two pano's from the USA show. Somewhere in the pile of APS pictures are several films my old took on a 4 week he and my mum went on, and every one of them is a pano'. He was never any good with a camera, he managed to get at least one finger in most of those shots. Laughing
We obviously took our IXUS on most of our trips for many years, I'd forgot how good it was.


Reply

Ok , here is a first sample from the first APS film I shot . Developed at fotostore , Nexia 200 expired from 2006 . Canon EOS IX EF 50/1.8



Reply

Better to forget it and shoot full frame, it is okay for family albums, but just acceptable.


Reply

Attila a écrit:
Better to forget it and shoot full frame, it is okay for family albums, but just acceptable.

yes, grainier than 35mm


Reply

I was given a Canon Ixus. I've not tried it yet, but looking at the results, I don't think I'll bother.


Reply

martinsmith99 a écrit:
I was given a Canon Ixus. I've not tried it yet, but looking at the results, I don't think I'll bother.

I 'd think that the postprocessing is very important for reasonably results on this format . I have not yet a very good workflow for this , and the exposure was rather crap (rough on camera flash , bad environamental lighting) . I reprocessed the image , with the new Capture one & trial version , I think it's better .Of course , don't beat 35 mm , but who said it would ? I didn't expect to be close to 35mm Anyhow , it's more acceptable . I'll try again with a fresh film to see what I can get .

Click to see better an bigger version :



[/url]


Dernière modification par yinyangbt le Ven Nov 09, 2012 11:06 pm ; modifié 1 fois au total


Reply

And another one , same workflow : Capture one 7 ( Clarity 0 , structure 57 , curves , highlight 27 ) + denoised in NeatImage (auto profile) + sharpened (slightly ) and healed ( scratch removal cloned dust ) in Helicon Filter free edition (best healing software I've used) .
a little too much ? Laughing
Tamron 17-35mm(around 30mm) flash of the camera .
Click on it to see large :


Dernière modification par yinyangbt le Ven Nov 16, 2012 9:22 am ; modifié 2 fois au total


Reply

And a third one :
Tamron 17-35 .I think it was 17 0r 20mm set . Pp in LR 4 trial vers( slight sharpening at 21 ) + denoised in NeatImage + cloned/erase scratches/sharpened(weery slightly) in Helicon filter




After all I think that It works , and the APS can be used ,at least for WEB posting , with very much care at processing the image : scanning on dedicated film scanner , in TIFF files and enough inconvenience (much more than the files I get from 35mm film) at PP to get the final JPEG s . It seems to me that the emulsion is a little more delicate and scratches easier than the 35mm , but maybe it's just an first impression .
I think that I have to look more for better PP solutions ( if there are any ) I'll try to experiment more . Maybe better denoising /sharpening algoritms with dedicated softwares could push up a little the IQ .


Dernière modification par yinyangbt le Ven Nov 16, 2012 9:23 am ; modifié 1 fois au total


Reply

They've turned out not bad at all considering the small neg area.
I wonder if 110 format could ever have reached the same level.


Reply

Farside a écrit:
They've turned out not bad at all considering the small neg area.
I wonder if 110 format could ever have reached the same level.

The frame area is 17mm x 13mm for 110 format , 30,2 mm x 16,7mm for APS , so a little under 1/2 of surface .
according to this site : http://cacreeks.com/films.htm Nexia Fujifilm (APS) shares the same emulsion with Superia . The grainier aspect of the APS files comes from the enlargement ( APS frame is around 56% from 35mm surface) . So , basically , those who say that APS film has a limited enlargement (print) potential are right (probably around 60 %). But , if we don't want to blow big prints for exposition , these first results make me think that the results are acceptable for screen viewing.
Why wasting time with it? I don't know if it's time wasting , maybe just for the fun of discovering a new toy? Smile Maybe dusty , maybe not last tech , but still useable... as long the film is available and can be developed . As for the 110 , I've never used , but I know there are guys that still do .I am expecting that the grain/frame area ratio to be bigger than in APS ( roughly 2x factor ) thus lower enlargement potential and perceived sharpness . Probably still acceptable for small area up to 700 px /500px images ?
I calculated that my APS scans on Dimage III are 6.3 MP files . 110 would produce probably 3mp files .
In digital world they solved the sharpness problem using smaller pixels ( wich isn't possible in film , the lp/mm is the same regardless the format) , and in this way the small format digital samples look sharp(er) . But , as sharpness isn't all , I'd give a try on the APS film against the small digital P&S when I think about dynamic range , for example .
Of course , we can hang on the 35mm and go on without complications ,concentrating on image Laughing


Reply

See my new results here : http://forum.mflenses.com/fuji-nexia-200-t54540.html


Reply

Now I am curious... I just bought a Minolta APS S-100 SLR. It came with a roll already in, so half of the roll are pics from somebody else.... And there's an extra roll of film too.
I have 2 lenses with it: 28-56mm and APO tele 80-240mm. The set was extremely cheap, so I could not resist!


Reply

TrueLoveOne a écrit:
Now I am curious... I just bought a Minolta APS S-100 SLR. It came with a roll already in, so half of the roll are pics from somebody else.... And there's an extra roll of film too.
I have 2 lenses with it: 28-56mm and APO tele 80-240mm. The set was extremely cheap, so I could not resist!

I know the feeling ! Laughing
Be careful , you have to get it scanned on a dedicated film scanner : Nikon Coolscan ,Konica Minolta Dimage ,Plustek or Reflecta , at 2800 or 3300 dpi . ,to get 6-8MP file .
Flatbeds generally are no good for scanning them (35mm either :Epson V700 or 750 are OK , they give 7MP from 35mm ,my Minolta Dimage III gives 6.3 MP from APS file )
Grain and sharpness can be managed with careful PP to get more than decent results .
I my modest experience the format suits better for normal , tele focal lenghts and slight wide ( 28mm see : http://forum.mflenses.com/old-sigma-28-200mm-f3-8-5-6-eos-mount-t54590.html ) . at superwide (17mm) the grain interfere too much with the fine detail .


Reply

That should not be a problem.... I use a Minolta Scan Dual myself, but i do not have the APS film holder that you need.....


Reply

TrueLoveOne a écrit:
That should not be a problem.... I use a Minolta Scan Dual myself, but i do not have the APS film holder that you need.....

It depends . If you have a lab wich has the special devices to develop APS they'll give it back in the original cartridge. So, an Konica Minolta APS adapter should be one that you'll have to search ( they are rather rare on the bay ) . Those made by Nikon are more easy to find , but obviously don't fit.
If your lab doesn't have the devices , it's simpler : they have to get out the film from the cartrige and develop without getting it back in to the original one . Then scan it in the 35 mm holder ( of course ,more tome consuming , because you'll have to reajust the position of the film to match the frames ). This is what I do. If you develop yourself , it can be done in the tank , but the spool has to be modified to take the APs film

PS http://www.manualslib.com/manual/104173/Minolta-Dimage-Scan-Dual-Ii-Af-2820u.html?page=28