MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Konica 40/1.8 dissasembly help wanted.
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I picked up another one of these puppies last week, unfortunately this one has a few specks of fungus on one of the center elements which I would rather get rid off.

Anyone got any tips and what I should look out for when cleaning this lens? Any hidden springs or sensitive fiddly parts?


Reply

Probably glued lens tags, once I did try Konica 135mm to clean, I couldn't fungus was inside in glued parts Sad


Reply

Attila a écrit:
Probably glued lens tags, once I did try Konica 135mm to clean, I couldn't fungus was inside in glued parts Sad


I'd leave it in the sun and see if that helped, but I haven't seen the sun for 15 months or something like that now.. Guess I need to get me one of those UV lamps


Reply

Nisseliten a écrit:
Attila a écrit:
Probably glued lens tags, once I did try Konica 135mm to clean, I couldn't fungus was inside in glued parts Sad


I'd leave it in the sun and see if that helped, but I haven't seen the sun for 15 months or something like that now.. Guess I need to get me one of those UV lamps


Store it properly in dry boy , low humidity 30-50% and without caps to allow light to go throw , fungus will not grow for sure. Even if you cure it with UV lamp and kill fungus successively , if store is humid and dark fungus will come again.
http://forum.mflenses.com/storing-lenses-t812.html


Reply

Attila a écrit:
Nisseliten a écrit:
Attila a écrit:
Probably glued lens tags, once I did try Konica 135mm to clean, I couldn't fungus was inside in glued parts Sad


I'd leave it in the sun and see if that helped, but I haven't seen the sun for 15 months or something like that now.. Guess I need to get me one of those UV lamps


Store it properly in dry boy , low humidity 30-50% and without caps to allow light to go throw , fungus will not grow for sure. Even if you cure it with UV lamp and kill fungus successively , if store is humid and dark fungus will come again.
http://forum.mflenses.com/storing-lenses-t812.html


Sweden is actually rather spared from fungus, this is the first time I've seen it in a lens bought in Sweden. I just need to kill the damn thing Smile


Reply

Nisseliten a écrit:
Attila a écrit:
Nisseliten a écrit:
Attila a écrit:
Probably glued lens tags, once I did try Konica 135mm to clean, I couldn't fungus was inside in glued parts Sad


I'd leave it in the sun and see if that helped, but I haven't seen the sun for 15 months or something like that now.. Guess I need to get me one of those UV lamps


Store it properly in dry boy , low humidity 30-50% and without caps to allow light to go throw , fungus will not grow for sure. Even if you cure it with UV lamp and kill fungus successively , if store is humid and dark fungus will come again.
http://forum.mflenses.com/storing-lenses-t812.html


Sweden is actually rather spared from fungus, this is the first time I've seen it in a lens bought in Sweden. I just need to kill the damn thing Smile


Cold weather help humidity to low for sure, but spores are everywhere even in Sweden once they found enough humid and dark place they will come sooner or later.


Reply

Nisseliten a écrit:
I picked up another one of these puppies last week, unfortunately this one has a few specks of fungus on one of the center elements which I would rather get rid off.

Anyone got any tips and what I should look out for when cleaning this lens? Any hidden springs or sensitive fiddly parts?


It has been a number of months ago. But this is the easiest to work on lens I've ever refurbished. Disassembly is straightforward with very few "gotchas". One thing: the frontmost retainer is not threaded . . it is sort of a bayonet design. And it is plastic. You gently "unscrew" it until it just comes apart. I cannot recall the rest, but it was obvious.

I only have one of these 40mm lenses and it had a couple of very annoying internal specks. They were easily erradicated.

I went in from the front but still was able to reach and clean all the lens elements. I did not mess with the fiddly mechanical stuff in the rear of the lens. It was working fine mechanically and I left well enough alone. So it would be fair to say I merely cleaned my lens, to include all the elements, and did not actually refurbish everything.