| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
Bogie
 Inscrit le: 22 Jan 2011 Messages: 173 Localisation: Houten, The Netherlands
|
 Posté: Sam Déc 29, 2012 5:30 pm Sujet du message: Askania Rangefinder - adjusting |
|
 Posté: Sam Déc 29, 2012 5:30 pm Sujet du message: Askania Rangefinder - adjusting |
|
|
Bogie wrote:
Since a couple of week I purchased an Askania Rangefinder.
Soon I found out that the calibration was off because the messured distances where wrong. But unlike other rangefinders the Askania has no adjustmentscrew at the outside. So I opened the rangefinder to look for an adjustmentscrew on the inside, but apart from a screw to aline the vertical adjustment there was nothing else to be found.
When I looked through the finder of the dismanteld rangefinder to a subject at infinity and slightly pushed the brass mirrorholder (which is moved by the adjustmentwheel) I realized that the calibration was perfect at that moment. I decided to put a thin piece of paper between the brass mirrorholder and the "blind screw" of the adjustmentwheel. The result was perfect!
After that I could just press the two halves of the rangefinder back together again.
 _________________ 35mm, 120mm & digital camera-user |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Dim Déc 30, 2012 8:32 pm Sujet du message: |
|
 Posté: Dim Déc 30, 2012 8:32 pm Sujet du message: |
|
|
Lloydy wrote:
I have a very similar Medis rangefinder and that is calibrated by a smll adjusting knob in the center of the main dial. I measure a distance, set the main dial to that, and then the tiny knob adjusts the rangefinder patch. The center knob is tight so it doesn't easily go out of adjustment.
Your picture looks as though there might be a similar arrangement on your Askania ? _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
Nesster
 Inscrit le: 24 Avr 2008 Messages: 5883 Localisation: NJ, USA
Expire: 2014-02-20
|
 Posté: Lun Déc 31, 2012 1:55 pm Sujet du message: |
|
 Posté: Lun Déc 31, 2012 1:55 pm Sujet du message: |
|
|
Nesster wrote:
These are typical instructions; however it is possible the Askania doesn't fit the mold. And at any rate sounds like you found a solution!
Photopia Rangefinder instructions by Nesster, on Flickr _________________ -Jussi
Camera photos
Print Photographica
|
|
| Haut de page |
|
 |
Bogie
 Inscrit le: 22 Jan 2011 Messages: 173 Localisation: Houten, The Netherlands
|
 Posté: Lun Déc 31, 2012 3:55 pm Sujet du message: |
|
 Posté: Lun Déc 31, 2012 3:55 pm Sujet du message: |
|
|
Bogie wrote:
The problem is that the round little "chrome" cover in the centre of the adjustmentwheel (which is probably hiding the adjustmentscrew) seems impossible to remove.
 _________________ 35mm, 120mm & digital camera-user |
|
| Haut de page |
|
 |
Lloydy
 Inscrit le: 02 Sep 2009 Messages: 7880 Localisation: Ironbridge. UK.
Expire: 2022-01-01
|
 Posté: Lun Déc 31, 2012 4:05 pm Sujet du message: |
|
 Posté: Lun Déc 31, 2012 4:05 pm Sujet du message: |
|
|
Lloydy wrote:
I think the center knob should turn - independently of the large adjuster - rather than be removed. I've just looked at a Watameter rangefinder and that is exactly the same. _________________ LENSES & CAMERAS FOR SALE.....
I have loads of stuff that I have to get rid of, if you see me commenting about something I have got and you want one, ask me.
My Flickr https://www.flickr.com/photos/mudplugga/
My ipernity -
http://www.ipernity.com/home/294337 |
|
| Haut de page |
|
 |
Bogie
 Inscrit le: 22 Jan 2011 Messages: 173 Localisation: Houten, The Netherlands
|
 Posté: Lun Déc 31, 2012 5:53 pm Sujet du message: |
|
 Posté: Lun Déc 31, 2012 5:53 pm Sujet du message: |
|
|
Bogie wrote:
| Lloydy a écrit: |
| I think the center knob should turn - independently of the large adjuster - rather than be removed. I've just looked at a Watameter rangefinder and that is exactly the same. |
Sorry, it is impossible to turn nor seems it possible to remove. _________________ 35mm, 120mm & digital camera-user |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|