MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Strobe Trigger Voltages
Voir le sujet précédent :: Voir le sujet suivant  


Reply

A lot of information on old strobes/flashes, hopefully to stop you frying your camera.

http://www.botzilla.com/photo/strobeVolts.html


Reply

Unfortunately, I remember reading that back in 2007.

The information is only useful to a point, as it refers to early DSLRs which could not cope with trigger voltages of 10v. My 400D, 40D and 5Dii were fine up to 250v, so unless you know what a particular camera will handle, it's not that helpful.


Reply

martinsmith99 a écrit:
Unfortunately, I remember reading that back in 2007.

The information is only useful to a point, as it refers to early DSLRs which could not cope with trigger voltages of 10v. My 400D, 40D and 5Dii were fine up to 250v, so unless you know what a particular camera will handle, it's not that helpful.

Oh well. Smile


Reply

I did change tiny url to normal one, not too long and I think helps more to target website to get better position in Google.


Reply

martinsmith99 a écrit:
unless you know what a particular camera will handle, it's not that helpful.


It's still useful for finding out the voltage of vintage flashguns.

I wrote to customer service at Sony UK to ask the maximum safe trigger voltage for the NEX-7. Foolishly I told them I wanted to use a
Minolta Auto360PX (6.9v). The reply was "not compatible", they didn't mention the voltage. I guess they want me to buy a dedicated
Sony flash. Think I should risk it?


Reply

peterqd a écrit:
martinsmith99 a écrit:
unless you know what a particular camera will handle, it's not that helpful.


It's still useful for finding out the voltage of vintage flashguns.

I wrote to customer service at Sony UK to ask the maximum safe trigger voltage for the NEX-7. Foolishly I told them I wanted to use a
Minolta Auto360PX (6.9v). The reply was "not compatible", they didn't mention the voltage. I guess they want me to buy a dedicated
Sony flash. Think I should risk it?

Buy a Wansen adapter for NEX with radio trigger (it's cheap on EBay from China) an be on the safe side Wink
http://www.ebay.de/itm/WANSEN16-channels-Transmitter-with-hotshoe-for-NEX3-NEX5-Canon-Speedlite-580EX-/271106875008?pt=LH_DefaultDomain_0&hash=item3f1f3a9e80


Reply

peterqd a écrit:
martinsmith99 a écrit:
unless you know what a particular camera will handle, it's not that helpful.


It's still useful for finding out the voltage of vintage flashguns.

I wrote to customer service at Sony UK to ask the maximum safe trigger voltage for the NEX-7. Foolishly I told them I wanted to use a
Minolta Auto360PX (6.9v). The reply was "not compatible", they didn't mention the voltage. I guess they want me to buy a dedicated
Sony flash. Think I should risk it?

They'd say that anyway, as an ass-covering move.
A few years ago an EU standard was introduced regarding the ability of cameras to withstand trigger voltages - up to 30V iirc. I lack detail of it at my fingertips right now, but it's out there in the Land of Google.


Reply

ForenSeil a écrit:
peterqd a écrit:
martinsmith99 a écrit:
unless you know what a particular camera will handle, it's not that helpful.


It's still useful for finding out the voltage of vintage flashguns.

I wrote to customer service at Sony UK to ask the maximum safe trigger voltage for the NEX-7. Foolishly I told them I wanted to use a
Minolta Auto360PX (6.9v). The reply was "not compatible", they didn't mention the voltage. I guess they want me to buy a dedicated
Sony flash. Think I should risk it?

Buy a Wansen adapter for NEX with radio trigger (it's cheap on EBay from China) an be on the safe side Wink
http://www.ebay.de/itm/WANSEN16-channels-Transmitter-with-hotshoe-for-NEX3-NEX5-Canon-Speedlite-580EX-/271106875008?pt=LH_DefaultDomain_0&hash=item3f1f3a9e80

Thankyou, it's interesting but I'm not into studio work. I want to be able to mount the flash on the camera.


Reply

There's a better and more comprehensive list somewhere on the internet, I posted the link here ages ago. But that one is still useful.


Reply

I simple use my voltmeter and measure it on the bare hotshoe contacts.


Reply

martinsmith99 a écrit:

My 400D, 40D and 5Dii were fine up to 250v, .


really ?
How did you knew it before testing ?


Reply

Nelson a écrit:
martinsmith99 a écrit:

My 400D, 40D and 5Dii were fine up to 250v, .


really ?
How did you knew it before testing ?

The Canon forum.