| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
ForenSeil
 Inscrit le: 15 Avr 2011 Messages: 2731 Localisation: Kappeln, Schleswig-Holstein, Germany.
|
 Posté: Ven Jan 25, 2013 12:20 am Sujet du message: "Errors" in film emulsion? |
|
 Posté: Ven Jan 25, 2013 12:20 am Sujet du message: "Errors" in film emulsion? |
|
|
ForenSeil wrote:
Hi
I'm getting sometimes such "errors" on B/W films. It occurs maybe once in 1 of maybe 5 rolls.
They ruined a few nice shots over the time
That's TriX 400 pushed to ISO 3200 in Xtol 1+1 - but I've already seen it with other dev.-/film combinations.
Can anyone say how to avoid them? _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Haut de page |
|
 |
berraneck
 Inscrit le: 24 Mai 2009 Messages: 972 Localisation: prague, czech republic
|
 Posté: Ven Jan 25, 2013 1:05 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 1:05 am Sujet du message: |
|
|
berraneck wrote:
just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size _________________ equipment doesn´t count, good photographs do |
|
| Haut de page |
|
 |
David
 Inscrit le: 13 Avr 2011 Messages: 1869 Localisation: Denver, Colorado
Expire: 2013-01-25
|
 Posté: Ven Jan 25, 2013 1:35 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 1:35 am Sujet du message: |
|
|
David wrote:
I had that happen when a piece of emulsion had torn in the film spiral's clip. The emulsion came off during developing and adhered to another part of the film. So, my question is whether that part of the emulsion (while in a plastic sheet) has a different relief? _________________ http://www.youtube.com/user/hancockDavidM |
|
| Haut de page |
|
 |
Attila
 Inscrit le: 24 Fév 2007 Messages: 58002
Expire: 2025-11-18
|
 Posté: Ven Jan 25, 2013 1:42 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 1:42 am Sujet du message: |
|
|
Attila wrote:
I never had similar experience. |
|
| Haut de page |
|
 |
themoleman342
 Inscrit le: 21 Oct 2007 Messages: 2190 Localisation: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posté: Ven Jan 25, 2013 2:58 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 2:58 am Sujet du message: |
|
|
themoleman342 wrote:
I can't say I've experienced anything like this before either. It does look as if a big piece of something adhered to the film. Xtol, I have noticed, has a tendency to separate and get little white flakes that settle to the bottom of the container. I wonder if one of these flakes stuck to the film somehow?
The image is not entirely lost. After about 2 minutes of cloning I ended up with this:
Obviously it's still very visible but if you spend some actual time, most things are salvageable. |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Ven Jan 25, 2013 3:25 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 3:25 am Sujet du message: |
|
|
iangreenhalgh1 wrote:
| Attila a écrit: |
| I never had similar experience. |
Me neither. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
Excalibur
 Inscrit le: 19 Juil 2009 Messages: 5018 Localisation: UK
Expire: 2014-04-21
|
 Posté: Ven Jan 25, 2013 8:57 am Sujet du message: |
|
 Posté: Ven Jan 25, 2013 8:57 am Sujet du message: |
|
|
Excalibur wrote:
Well I've had that problem a few times with colour negs done by the supermarket, but a much smaller irregular white patch and always assumed it was something floating around the developer\fixer that stuck to the neg. It has never bothered me as I just remove it with photoshop. _________________ Canon A1, AV1, T70 & T90, EOS 300 and EOS300v, Chinon CE and CP-7M. Contax 139, Fuji STX-2, Konica Autoreflex TC, FS-1, FT-1, Minolta X-700, X-300, XD-11, SRT101b, Nikon EM, FM, F4, F90X, Olympus OM2, Pentax S3, Spotmatic, Pentax ME super, Praktica TL 5B, & BC1, , Ricoh KR10super, Yashica T5D, Bronica Etrs, Mamiya RB67 pro AND drum roll:- a Sony Nex 3
.........past gear Tele Rolleiflex and Rollei SL66.
Many lenses from good to excellent. |
|
| Haut de page |
|
 |
spoilerhead
 Inscrit le: 25 Jan 2012 Messages: 68 Localisation: ITaly
|
 Posté: Ven Jan 25, 2013 3:05 pm Sujet du message: |
|
 Posté: Ven Jan 25, 2013 3:05 pm Sujet du message: |
|
|
spoilerhead wrote:
had that once when two windings of the film touched on the development reel. _________________ Eos (A/D) + M42 |
|
| Haut de page |
|
 |
themoleman342
 Inscrit le: 21 Oct 2007 Messages: 2190 Localisation: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posté: Ven Jan 25, 2013 3:27 pm Sujet du message: |
|
 Posté: Ven Jan 25, 2013 3:27 pm Sujet du message: |
|
|
themoleman342 wrote:
| Citation: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
|
| Haut de page |
|
 |
iangreenhalgh1
 Inscrit le: 18 Mar 2011 Messages: 15679
Expire: 2014-01-07
|
 Posté: Ven Jan 25, 2013 4:57 pm Sujet du message: |
|
 Posté: Ven Jan 25, 2013 4:57 pm Sujet du message: |
|
|
iangreenhalgh1 wrote:
| themoleman342 a écrit: |
| Citation: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| Haut de page |
|
 |
ForenSeil
 Inscrit le: 15 Avr 2011 Messages: 2731 Localisation: Kappeln, Schleswig-Holstein, Germany.
|
 Posté: Ven Jan 25, 2013 6:52 pm Sujet du message: |
|
 Posté: Ven Jan 25, 2013 6:52 pm Sujet du message: |
|
|
ForenSeil wrote:
| berraneck a écrit: |
| just first idea, do you keep temperature of all liquids about the same? I´ve seen some emulsion errors when washing temperature was too hot or too cool, but never this size |
This might be the problem
I doing the final wash a bit warmer for faster drying.
Thx! _________________ I'm not a collector, I'm a tester
My camera: Sony A7+Zeiss Sonnar 55/1.8
Current favourite lenses (I have many more):
A few macro-Tominons, Samyang 12/2.8, Noritsu 50.7/9.5, Rodagon 105/5.6 on bellows, Samyang 135/2, Celestron C8 2000mm F10
Most wanted: Samyang 24/1.4, Laowa 100/2.8 2x, Nikon 200/2 ED |
|
| Haut de page |
|
 |
spoilerhead
 Inscrit le: 25 Jan 2012 Messages: 68 Localisation: ITaly
|
 Posté: Sam Jan 26, 2013 10:00 am Sujet du message: |
|
 Posté: Sam Jan 26, 2013 10:00 am Sujet du message: |
|
|
spoilerhead wrote:
| iangreenhalgh1 a écrit: |
| themoleman342 a écrit: |
| Citation: |
| had that once when two windings of the film touched on the development reel. |
Wouldn't that stop the developer from reaching the film, resulting in a dark spot? |
Yes, that is what happens. The emulsion remains on the neg and is opaque so comes out as a black area when scanned. |
um...
It forms a dark spot on the negative, what equals to a white spot on the positive. _________________ Eos (A/D) + M42 |
|
| Haut de page |
|
 |
themoleman342
 Inscrit le: 21 Oct 2007 Messages: 2190 Localisation: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posté: Sam Jan 26, 2013 1:51 pm Sujet du message: |
|
 Posté: Sam Jan 26, 2013 1:51 pm Sujet du message: |
|
|
themoleman342 wrote:
| Citation: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
|
| Haut de page |
|
 |
spoilerhead
 Inscrit le: 25 Jan 2012 Messages: 68 Localisation: ITaly
|
 Posté: Sam Jan 26, 2013 2:30 pm Sujet du message: |
|
 Posté: Sam Jan 26, 2013 2:30 pm Sujet du message: |
|
|
spoilerhead wrote:
| themoleman342 a écrit: |
| Citation: |
| It forms a dark spot on the negative, what equals to a white spot on the positive. |
I don't understand how that occurs than. Why would the film touching result in over-development in that spot? It should be the complete opposite. |
I'ts not overdevelopment at all
If two windings touch nothing reaches the emulsion, including the fixer, so the actual emulsion stays on the film (the spot looks like undeveloped film). I've never seen it the other way around (touching while in developer and not touching while in fixer).
According to my experience this usually happens when a reel jams, and you use to much force to fix it. _________________ Eos (A/D) + M42 |
|
| Haut de page |
|
 |
themoleman342
 Inscrit le: 21 Oct 2007 Messages: 2190 Localisation: East Coast (CT), U.S.A.
Expire: 2013-01-24
|
 Posté: Sam Jan 26, 2013 3:02 pm Sujet du message: |
|
 Posté: Sam Jan 26, 2013 3:02 pm Sujet du message: |
|
|
themoleman342 wrote:
Oh, I understand! Thanks for the clarification. |
|
| Haut de page |
|
 |
jimithing616
 Inscrit le: 27 Mar 2013 Messages: 63 Localisation: Minneapolis, MN
|
 Posté: Sam Avr 20, 2013 7:23 am Sujet du message: |
|
 Posté: Sam Avr 20, 2013 7:23 am Sujet du message: |
|
|
jimithing616 wrote:
This, to me, looks like you are either rolling your film on the reel wrong and it is touching in those spots causing the stop, fix, whatever to stick and burn in like that... or your not washing well enough and the same is happening... also are you using powder developer? if so make sure there are no lumps in it... lumps could cause this. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| Haut de page |
|
 |
jimithing616
 Inscrit le: 27 Mar 2013 Messages: 63 Localisation: Minneapolis, MN
|
 Posté: Sam Avr 20, 2013 7:25 am Sujet du message: |
|
 Posté: Sam Avr 20, 2013 7:25 am Sujet du message: |
|
|
jimithing616 wrote:
In fact it kinda looks like there was absolutely NO emulsion there doesn't it... like it somehow was scratched away. _________________ My Best Lenses (off the top of my head):
Konica UC 28mm 1.8 AR
Konica UC 80-200mm 4 AR x2
Konica 55mm 3.5 Macro w/Converter.
Minolta MD 24mm 2.8
Minolta MC 58mm 1.4
Minolta MD & MC 50 1.4
Vivitar 35mm 1.9 (minolta MD)
Canon FD 50mm 1.4 S.S.C. & FDn
Canon FD 24mm 2.8 S.S.C. & FDn
Canon FD 200mm 4 S.S.C
Canon FD 135 3.5 S.C. & FDn
Tamron Adaptall 2 24mm 2.5
Nikon AI-S 55mm 2.8 Macro
SMC Pentax-m 50mm 1.4
SMC Pentax-m 135 3.5
Spiratone Plura-Coat 28mm f/2 |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|