MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Glue for camera grips
Voir le sujet précédent :: Voir le sujet suivant  


Reply

Hi,

Just wondering if you could recommend me some double sided tape or glue to fit the grips of my D200, i've tried contact glue and double sided tape (cheapo ebay origin) but obviously didn't work. I wouldn't want to use silicone i rather use a better double sided tape but what do you think?

Also the grips had't been propperly glued for a while (since i opened my camera to replace the shutter 1.5 years ago) but now they seem have "expanded", i mean there is more grip than space in the camera to fit it, normal? any idea about that?

Thanks.


Reply

Try 'universal' glue strong enough to keep plastic in place and elastic, if need to take off also allow it. I think available similar in every country to kids to glue everything not only paper.
[img]http://www.hbproduktiv.hu/uploads/assets/images/products/6/5969_original.jpg [/img]


Reply

I don't follow what you mean when you say "grips"


Reply

Hi peter, i mean the plastics where you put your fingers/hands to hold the camera. (soft rubber)

Thanks attila i will give it a try.


Reply

Be sure to clean all the old glue off both surfaces before applying new glue, different types of glue generally do not stick to each other.


Reply

Lloydy a écrit:
Be sure to clean all the old glue off both surfaces before applying new glue, different types of glue generally do not stick to each other.

+1 clean, little sanded surfaces help a lot