| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
yusuf
 Inscrit le: 19 Jan 2013 Messages: 68 Localisation: India
|
 Posté: Jeu Fév 07, 2013 5:22 pm Sujet du message: Helios 44k-4 disassembly and focus adjustment |
|
 Posté: Jeu Fév 07, 2013 5:22 pm Sujet du message: Helios 44k-4 disassembly and focus adjustment |
|
|
yusuf wrote:
Hi,
My Helios 44k-4 does not focus on infinity. I tried to adjust rear element which helped, but can't adjust any further (will be too loose). Any idea, will front element adjustment do?
Also, I am looking for disassembly instructions for Helios 44K-4. This one does not have any screws on body except on mount.
Can someone help me please.
Thanks
Yusuf _________________ Few Film & Digital pics here https://www.facebook.com/frozenents |
|
| Haut de page |
|
 |
Lightshow
 Inscrit le: 04 Nov 2011 Messages: 3666 Localisation: Calgary
|
 Posté: Jeu Fév 07, 2013 7:11 pm Sujet du message: |
|
 Posté: Jeu Fév 07, 2013 7:11 pm Sujet du message: |
|
|
Lightshow wrote:
I haven't worked on one yet so I can't really help much, but I do know that loosening the element retainer or the rear group is the wrong way to adjust infinity, you risk damaging your camera if it comes loose, and the elements will not be at their proper distances from each other, which could cause other optical issues.
Is this your only K mount lens? If it isn't, it could be the adapter is out of spec, trying more k mount lenses will tell you if it the adapter. _________________ A Manual Focus Junky...
One photographers junk lens is an artists favorite tool.
My lens list
http://www.flickr.com/photos/lightshow-photography/ |
|
| Haut de page |
|
 |
nukemall
 Inscrit le: 24 Avr 2012 Messages: 96 Localisation: Blagoveschensk, Russia
|
 Posté: Ven Fév 08, 2013 1:54 am Sujet du message: |
|
 Posté: Ven Fév 08, 2013 1:54 am Sujet du message: |
|
|
nukemall wrote:
For infinity adjustment:
1. Make similar tool:
2. Unscrew nameplate ring:
3. Unscrew small screws and remove part with filter thread:
Here you can see small screws(dark on yellow brass), they connecting focusing ring with the helicoid.
Set focus to infinity and loose these screws(focusing ring must rotate freely). Connect lens to camera and direct to remote object. Look to "Live View" and adjust focus. You can rotate outer(brass) ring of helicoid by side pushing screw head with screwdriver. When focusing is correct - set ring to infinity and tighten screws. _________________ My blog |
|
| Haut de page |
|
 |
yusuf
 Inscrit le: 19 Jan 2013 Messages: 68 Localisation: India
|
 Posté: Ven Fév 08, 2013 4:20 am Sujet du message: |
|
 Posté: Ven Fév 08, 2013 4:20 am Sujet du message: |
|
|
yusuf wrote:
Thanks a lot nukemall. That exactly what I needed.
I could not move helicoid further to I assume focusing ring and helicoid were in proper place (pls correct me). However, then loosening front element a bit solved the problem. Looks like a shim was needed. Now lens focuses to infinity.
Again thanks
Yusuf _________________ Few Film & Digital pics here https://www.facebook.com/frozenents |
|
| Haut de page |
|
 |
nukemall
 Inscrit le: 24 Avr 2012 Messages: 96 Localisation: Blagoveschensk, Russia
|
 Posté: Ven Fév 08, 2013 4:57 am Sujet du message: |
|
 Posté: Ven Fév 08, 2013 4:57 am Sujet du message: |
|
|
nukemall wrote:
If you loose element(front or rear) - then you change lens focal length and optical design. Infinity focus adjustment can be made for this lens only by correcting position of the focusing ring relative to the helicoid's outer ring.
See here:
 _________________ My blog |
|
| Haut de page |
|
 |
yusuf
 Inscrit le: 19 Jan 2013 Messages: 68 Localisation: India
|
 Posté: Ven Fév 08, 2013 8:05 am Sujet du message: |
|
 Posté: Ven Fév 08, 2013 8:05 am Sujet du message: |
|
|
yusuf wrote:
| nukemall a écrit: |
If you loose element(front or rear) - then you change lens focal length and optical design. Infinity focus adjustment can be made for this lens only by correcting position of the focusing ring relative to the helicoid's outer ring.
See here:
 |
ok, getting it, need some more help in that case. Sorry if I have some basic questions because I am doing it for the first time.
I removed the entire focusing ring and tried rotating the brass ring of helicoid in the direction of infinity focus however it does not rotate further. _________________ Few Film & Digital pics here https://www.facebook.com/frozenents |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|