MFlenses - Une nouvelle vie à l’ère numérique
MFLenses 2026

Forum des objectifs à mise au point manuelle

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.

Explorez le monde des objectifs anciens à travers des notes de réparation, des photos d’essai réelles et des archives détaillées.
Pleins feux

Emplacement partenaire mis en avant sur la page d’accueil du forum.

Ica Icarette B
Voir le sujet précédent :: Voir le sujet suivant  


Reply

I just got an Ica Icarette B on ebay. paid just over a tenner for it. The photos showed it closed and when pressed for more images the seller took more photos of it closed So I took a chance. Delivered the next day I opened it and it's beautiful.

Small, I didn't realise it was so tiny! A real pocket camera! It takes 6x6cm photos on 120 film. It's a real jewel.

The lens is clear - well a couple of specks of dust, but the aperture is nice and the shutter works, the speeds are different but I don't know how accurate. The bellows appear to be light tight. I intend putting a film through this beauty. I am so pleased with this camera. I have had folders younger than this that have been in a lot worse condition.

Spec:

Type: 120 Rollfilm folder. Made about 1920 and 1925 by Ica before Zeiss took them over.

Lens: 7.5cm f6.8 Helka Double anastigmat lens

Shutter: Ica leaf shutter with speeds 1/25, 1/50 and 1/100 sec. plus B and T mode

The camera also has a plate back and there is a lever to change infinity when using plates.

The case is leather but has been scorched to the point of burning I don't know if there is anything I can do about it. Suggestions?

Pics:




The 120 spool inside is wooden but seems a little narrower than the spare metal one I have see below



The metal one's flanges (from a Voigtlander Bessa) are 2.5cm diameter and the one in the Icarette is 2.1cm. The camera only takes the smaller spool. Which is standard? and importantly will my camera accept modern 120 film on modern spools?? Help!


Reply

I did expect lot bigger , just like you, Ica was a great maker indeed. Congrats!


Reply

philslizzy a écrit:
..........The case is leather but has been scorched to the point of burning I don't know if there is anything I can do about it. Suggestions?

I use black shoepolish on worn cameraleather.

The spool of your camera is a 620-spool. In order to use a 120-spool in your camera you will have to clip the edges of a 120-spool to make it fit.


Reply

Beautiful acquisition! Smile
(I've posted some thoughts about the spools on the spools thread http://forum.mflenses.com/viewtopic,p,1304989.html#1304989 .)


Reply

Despite the spool business, that is one hell of a looker, a fine camera indeed. I'm also thinking that with the rear flap you might fashion something to hold a digital camera and use it that way, just for fun.


Reply

Nesster a écrit:
Despite the spool business, that is one hell of a looker, a fine camera indeed. I'm also thinking that with the rear flap you might fashion something to hold a digital camera and use it that way, just for fun.


What a great idea! Very Happy Very Happy Very Happy Very Happy I'll look at connecting it to my NEX. Watch this space!! Thanks!!

here is some info I found at Butkus on this camera



Unfortunately I don't have the focusing hood and plate holders

and this from camera-wiki.org



Reply

Bogie a écrit:
philslizzy a écrit:
..........The case is leather but has been scorched to the point of burning I don't know if there is anything I can do about it. Suggestions?

I use black shoepolish on worn cameraleather...


It was the camera case not the leather on the camera. I use the sponge-on type of polish rather than the wax bases solid type. It looks lovely now.


Nesster a écrit:
Despite the spool business, that is one hell of a looker, a fine camera indeed. I'm also thinking that with the rear flap you might fashion something to hold a digital camera and use it that way, just for fun.


Well Nesster it took me 20 minutes to have my NEX attached. Now my Icarette has a digital back until I sort out the spool business. see the spool thread: http://forum.mflenses.com/viewtopic,p,1304991.html#1304991

Here's the adapter. I cut a piece of plasticard 1.5mm thick to precisely the size of the plate back cover and filed the edges down so that it slides into the grooves. The grip on my camera prevented me mounting the Icarette flush to the body so a little thickness was needed. A spare m39 adapter fitted the bill. I attached the adapter to the NEX and marked its position and cut a hole in the plastic just a little smaller than the m39 thread. I simply sanded the surface of the adapter and glued it into position, allowing the epoxy resin to flow into the threads of the adapter. It works a treat! Ok the focusing on the Icarette has to be further back but that's no problem. I'll finish of the adapter with a lick of black paint. But meanwhile its great. I'll go out on Thursday morning and give it a go.



and my Nex piggybacked on it.



An unretouched picture (just resized) taken through my window within half an hour of reading Nesster's suggestion.



and one taken tonight in the kitchen. I used auto levels to bring it up. The 100% crop shows great detail. Fantastic for a lens that's about 90 years old!




Reply

Very Happy Cool WAY cool, you, sir, are my hero in the messin-with-cameras-for-the-hell-of-it department. Super result, and a neat job.


Reply

Excellent job, a very good conversion. Cool


Reply

Nesster a écrit:
Very Happy Cool WAY cool, you, sir, are my hero in the messin-with-cameras-for-the-hell-of-it department. Super result, and a neat job.


Laughing Laughing Laughing .Thanks for the compliment, you don't know how long I laughed for when I read this Laughing Laughing Laughing


Lloydy a écrit:
Excellent job, a very good conversion. Cool


Thanks Dave, Easily done. All you need is inspiration.

I can use the lens from this fine camera without taking it off, if only it were so simple with other cameras.

When I give it a go outside I'm going to use the camera shutter to make exposures to see how it fares.


Reply

Well, after posting the above I noticed 'tree fellers' outside my flat. Yes there were tree of them and the one up the tree was having trouble with his chainsaw. Here is a photo taken with the Icarette and it's 'digital back'. taken 'tru' my double glazed window.


The images are lacking in contrast but that is a 90 year old lens. The 100% crop had had 'auto contrast' added in photoshop. I'm happy with this camera!



Reply

ICA were a top maker, I have often thought about buying a Cocarette because I need a 6x9 folder with sliding bed focus, but the Cocarette has a stupid bottom loading system like a Leica, so I discounted it for my list of possibilities.


Reply

philslizzy,

A neat way of attaching an old camera.

I see fully the contrast issue after seeing other photographs, and how a little manipulation can bring out the colours.

Thanks for the tips, and all the best using your setup above, and long may you remain hero in the messin-with-cameras-for-the-hell-of-it department.


Reply

zelda_n64 a écrit:
philslizzy,

A neat way of attaching an old camera.

I see fully the contrast issue after seeing other photographs, and how a little manipulation can bring out the colours.

Thanks for the tips, and all the best using your setup above, and long may you remain hero in the messin-with-cameras-for-the-hell-of-it department.


Cheers Zelda, It's what I do!!