| Voir le sujet précédent :: Voir le sujet suivant |
| Auteur |
Message |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Dim Mar 24, 2013 2:15 pm Sujet du message: Front/rear element flipping |
|
 Posté: Dim Mar 24, 2013 2:15 pm Sujet du message: Front/rear element flipping |
|
|
guardian wrote:
This is limited to lenses having front and/or rear elements which are "flippable". "Flippable" in this instance means symmetrical. A lens convex on one side and concave on the other obviously is not flippable. A lens having dissimilar curvatures front and rear is not "flippable".
That said:
What are the merits of renewing the exposed surface of a front or rear element by flipping? Depending on the lens's age and the amount of wear and tear to which it has been subjected over many years, might this not be something to consider?
For scratched lenses, would it not be better if light incident upon the lens encounters a first surface free of scratches, even if that means the exit surface will have the scratches, instead? To the extent scratches or imperfection trap dirt, would it not be better to face the scratches toward the lens's interior, where the environment is surely cleaner?
Lens flipping, when possible, seems to me something to consider. What do you think? |
|
| Haut de page |
|
 |
RSalles
 Inscrit le: 12 Août 2012 Messages: 1372 Localisation: Brazil - RS / South
|
 Posté: Dim Mar 24, 2013 4:53 pm Sujet du message: |
|
 Posté: Dim Mar 24, 2013 4:53 pm Sujet du message: |
|
|
RSalles wrote:
I think that is better to know which can be flipped and to avoid a lens like this from a not proven reputation's seller,
[]s,
Renato |
|
| Haut de page |
|
 |
Orio
Inscrit le: 24 Fév 2007 Messages: 29545 Localisation: West Emilia
Expire: 2012-12-04
|
 Posté: Dim Mar 24, 2013 5:04 pm Sujet du message: |
|
 Posté: Dim Mar 24, 2013 5:04 pm Sujet du message: |
|
|
Orio wrote:
What may look like flippable, may actually be not. _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |
|
| Haut de page |
|
 |
martinsmith99
 Inscrit le: 31 Août 2008 Messages: 7029 Localisation: S Glos, UK
Expire: 2013-11-18
|
 Posté: Dim Mar 24, 2013 6:42 pm Sujet du message: |
|
 Posté: Dim Mar 24, 2013 6:42 pm Sujet du message: |
|
|
martinsmith99 wrote:
if the lens is scratched, it's scratched, no matter which side points outwards. _________________ Casual attendance these days |
|
| Haut de page |
|
 |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Dim Mar 24, 2013 8:25 pm Sujet du message: |
|
 Posté: Dim Mar 24, 2013 8:25 pm Sujet du message: |
|
|
guardian wrote:
| martinsmith99 a écrit: |
| if the lens is scratched, it's scratched, no matter which side points outwards. |
Agreed
Lenses bend light, though. Light incident upon the lens's first surface, however, is not yet bent, whereas light exiting the lens already has been bent by the lens's optical properties.
Also, regarding coatings:
If the old surface has imperfections in its coating, owing for example to over-exuberant cleaning, while the flipped lens offers (to incident light) a fresh, new, and perfect coating, would that not be an advantage? Coatings matter too, of course, inside the lens. But would not the coating quality of the first surface matter more? |
|
| Haut de page |
|
 |
visualopsins
 Inscrit le: 05 Mar 2009 Messages: 11699 Localisation: California
Expire: 2027-07-11
|
 Posté: Dim Mar 24, 2013 10:55 pm Sujet du message: |
|
 Posté: Dim Mar 24, 2013 10:55 pm Sujet du message: |
|
|
visualopsins wrote:
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... _________________ ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮ like attracts like! ☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮☮
Cameras: Sony ILCE-7RM2, Spotmatics II, F, and ESII, Nikon P4
Lenses:
M42 Asahi Optical Co., Takumar 1:4 f=35mm, 1:2 f=58mm (Sonnar), 1:2.4 f=58mm (Heliar), 1:2.2 f=55mm (Gaussian), 1:2.8 f=105mm (Model I), 1:2.8/105 (Model II), 1:5.6/200, Tele-Takumar 1:5.6/200, 1:6.3/300, Macro-Takumar 1:4/50, Auto-Takumar 1:2.3 f=35, 1:1.8 f=55mm, 1:2.2 f=55mm, Super-TAKUMAR 1:3.5/28 (fat), 1:2/35 (Fat), 1:1.4/50 (8-element), Super-Multi-Coated Fisheye-TAKUMAR 1:4/17, Super-Multi-Coated TAKUMAR 1:4.5/20, 1:3.5/24, 1:3.5/28, 1:2/35, 1:3.5/35, 1:1.8/85, 1:1.9/85 1:2.8/105, 1:3.5/135, 1:2.5/135 (II), 1:4/150, 1:4/200, 1:4/300, 1:4.5/500, Super-Multi-Coated Macro-TAKUMAR 1:4/50, 1:4/100, Super-Multi-Coated Bellows-TAKUMAR 1:4/100, SMC TAKUMAR 1:1.4/50, 1:1.8/55
M42 Carl Zeiss Jena Flektogon 2.4/35
Contax Carl Zeiss Vario-Sonnar T* 28-70mm F3.5-4.5
Pentax K-mount SMC PENTAX-A ZOOM 1:3.5 35~105mm, SMC PENTAX ZOOM 1:4 45~125mm
Nikon Micro-NIKKOR-P-C Auto 1:3.5 f=55mm, NIKKOR-P Auto 105mm f/2.5 Pre-AI (Sonnar), Micro-NIKKOR 105mm 1:4 AI, NIKKOR AI-S 35-135mm f/3,5-4,5
Solinon 1:5.6/18 ASPH.
Tamron SP 17mm f/3.5 (51B), Tamron SP 17mm f/3.5 (151B), SP 500mm f/8 (55BB), SP 70-210mm f/3.5 (19AH)
Vivitar 100mm 1:2.8 MC 1:1 Macro Telephoto (Kiron)
|
|
| Haut de page |
|
 |
guardian
 Inscrit le: 18 Mar 2009 Messages: 1750
|
 Posté: Lun Mar 25, 2013 12:00 pm Sujet du message: |
|
 Posté: Lun Mar 25, 2013 12:00 pm Sujet du message: |
|
|
guardian wrote:
| visualopsins a écrit: |
I don't think there are any camera lenses with any element having identical curvatures both sides.
If there are any, surely factory couldn't say which side is which, eh?
Rear element scratches show in images, while front element scratches rarely show other than loss of contrast. Scratches show when angle of incidence is steep enough... |
I appreciate your comments. First of all, I should have paid better attention in high school physics!
But just on gut instinct, and thinking about this only following the insight provided by your post, I tend to agree with you about lack of front element symmetry. This is something to which I shall be paying much more attention going forward!!  |
|
| Haut de page |
|
 |
|
|
|
Vous ne pouvez pas publier de nouveaux sujets dans ce forum Vous ne pouvez pas répondre aux sujets de ce forum Vous ne pouvez pas modifier vos messages dans ce forum Vous ne pouvez pas supprimer vos messages dans ce forum Vous ne pouvez pas voter dans les sondages de ce forum
|